New Items Forum
Register

Total Price

$0.00

Cart 0 Cart 0 Loading...

Basher Nitro Circus 1/8 Scale 4WD Monster Truck w/2.4Ghz radio (RTR)

Basher Nitro Circus 1/8 Scale 4WD Monster Truck w/2.4Ghz radio (RTR)

Discontinued Product

Please continue searching for a similar product.
SKU:
9249000373
WANT FREE SHIPPING? Click here to find out more!

New from Basher, the officially licenced Nitro Circus RC Monster Truck! Inspired by the only monster truck to ever do a backflip! This 1/8th scale grin inducing RC tuck is built to handle everything you throw at it! Don’t think outside the box, SMASH through it while popping a wheelie and launching off a ramp!

The Basher Nitro Circus MT Features a monster 4 cell capable brushless power system ready for your batteries and puts all that power down through an all steel 4WD drive transmission. With big bore alloy shocks and heavy duty components, this truck can launch off almost anything and just keep on truck’n!

The attention to detail on this truck is extraordinary. The engineers and designers at Basher underwent an extensive testing and development process to ensure no shortcuts were taken. Team Basher understand the importance of after sales support and offer a full range of spares for your battle scared truck along with an awesome range of hop-up parts to upgrade your ride.

The Nitro Circus crew drove it like they stole it and in the end were excited about putting their hard earned name on it. Who knows, maybe it will have a cameo in their next movie or live show?

Features:
• Officially licensed by Nitro Circus
• Powerful 2075KV Brushless Inrunner Motor 
• 80A Brushless ESC w/ Reverse 
• 15Kg Heavy Duty Steering Servo
• Full time 4WD 
• Steel front, center and rear sealed differentials 
• Hardened steel pinion gear 
• Heavy duty drive shafts 
• Hardened metal drive cups 
• Full ball bearings
• 3.5mm alloy chassis plate 
• Adjustable screw shock absorbers 
• Oil filled, big bore shock absorbers 
• 3.5mm shock shaft 
• Adjustable toe-in and toe-out 
• Adjustable camber and castor 
• Independent wishbone suspension

Specs:
Length: 577mm 
Width: 480mm 
Height: 314mm (To top of cab) 
Ground clearance: 110mm (Adjustable) 
Battery area: 138mm x 46mm x 25mm

Included:
1/8 scale Nitro Circus Basher monster truck
2.4ghz digital radio system
Parallel battery adapter cable
Wheel wrench
Instruction Manual

Required:
Charger for Li-poly battery
4 x AA batteries
2 x 2S 5000mah packs in series
OR
2x large capacity 4S packs in parallel for increased run time (battery adapter required) 

  • SKU 9249000373
  • Brand Basher
  • Capacity (mAh) -
  • Shipping Weight 7325.0000
  • Packaging Length 600.00
  • Packaging Width 300.00
  • Packaging Height 450.00
  • Basher Nitro Circus 1/8 Scale 4WD Monster Truck w/2.4Ghz radio
  • Basher Nitro Circus Monster Truck
  • Basher Nitro Circus Monster Truck
  • Basher Nitro Circus Monster Truck
  • Basher Nitro Circus Monster Truck
  • Basher Nitro Circus Monster Truck
Upload video

Only registered users can upload video. Please, log in or register

Only registered users can write reviews. Please, sign in or sign up

I'm more of a plane guy, but Santa brought this from crimbo for a FPV project.

I'm running on 2 x 4s 3000mah 20c Zippys in parallel. Because I had some and they are cheap, I just converted the supplied parallel cable to XT60 ends. I did notice today after a really bad roof landing that the 4mm bullet plugs connecting the parallel cable to ESC came out. Just beware they are fitted the wrong way round (male part on battery side!) so could have ended badly if it shorted. I'll prolly just secure the plugs together with some electrical tape. Run time is amazing, I usually get bored or cold before one pack is done (30-40 mins) of just bashing ususally.

I've noticed the oil leaking out of the front shocks after the first run. After 4 packs I destoryed the 40mm cooling fan (not really sure it's even needed a cold climate) and magaged to crack one of the corners of the shell which actually seems to hold up pretty well for all the abuse it gets.

I'm still using the stock RC tx and it's not bad. Reverse seems to be a bit a struggle to enter sometimes (double tap brakes). I've also been through loads of wet grass and puddles and don't seem to have killed any electronics, but the manual only says they are splash proof.

All in all, I paid $240 with a buddy code, so am really happy with the quailty and strength for the price.


verified_user Quality:
trending_up Value:
playlist_add_check Overall:

I'm more of a plane guy, but Santa brought this from crimbo for a FPV project.

I'm running on 2 x 4s 3000mah 20c Zippys in parallel. Because I had some and they are cheap, I just converted the supplied parallel cable to XT60 ends. I did notice today after a really bad roof landing that the 4mm bullet plugs connecting the parallel cable to ESC came out. Just beware they are fitted the wrong way round (male part on battery side!) so could have ended badly if it shorted. I'll prolly just secure the plugs together with some electrical tape. Run time is amazing, I usually get bored or cold before one pack is done (30-40 mins) of just bashing ususally.

I've noticed the oil leaking out of the front shocks after the first run. After 4 packs I destoryed the 40mm cooling fan (not really sure it's even needed a cold climate) and magaged to crack one of the corners of the shell which actually seems to hold up pretty well for all the abuse it gets.

I'm still using the stock RC tx and it's not bad. Reverse seems to be a bit a struggle to enter sometimes (double tap brakes). I've also been through loads of wet grass and puddles and don't seem to have killed any electronics, but the manual only says they are splash proof.

All in all, I paid $240 with a buddy code, so am really happy with the quailty and strength for the price.


This is my first MT and I like it. Quality seems fine and I'm not really hard basher like some others so I'm sure it holds just fine. Motor mount is only for 36mm motors so that's little disappointment and body seems little weak but still great value for money. Highly recommendable for anyone who's looking for 1/8 MT.

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

This is my first MT and I like it. Quality seems fine and I'm not really hard basher like some others so I'm sure it holds just fine. Motor mount is only for 36mm motors so that's little disappointment and body seems little weak but still great value for money. Highly recommendable for anyone who's looking for 1/8 MT.

After running some 4s packs through my Nitro Circus, I must say I'm very impressed.
The truck seems to be very tough. I've bashed it hard, so far I've only smashed the motor fan, pulled a steering turnbuckle out of the ball end, and cracked the edge of a wheel.
It should be mentioned I also modified the chassis to fit a 40mm motor mount, the truck has so far handled the increased speed and power perfectly.
The truck drives extremely well - you should replace the stock tires though. While they're alright to start out with and look great, this truck deserves some better shoes, and handles better with them.
The shocks are extremely good. This truck was made for sick jumps, and the shocks soak it all up.
My only wish is that the truck came with a motor mount compatible with 40mm motors out of the box. The stock power plant is fine, but is geared WAY low and gearing options are limited. The 4074 2350kv motor and 16t pinion I installed REALLY unleashed the monster in this platform, and it handled much better than I expected. Now it can bash with the best.
It's not all bad with the stock motor, though, as it's still capable of doing sweet jumps, has really good battery runtime, and extremely low running temperatures.
I feel that this truck offers some of the best value on the RC brushless offroad truck market today. In Europe, it is THE best value, no competition, period.
I'm thinkin

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

After running some 4s packs through my Nitro Circus, I must say I'm very impressed.
The truck seems to be very tough. I've bashed it hard, so far I've only smashed the motor fan, pulled a steering turnbuckle out of the ball end, and cracked the edge of a wheel.
It should be mentioned I also modified the chassis to fit a 40mm motor mount, the truck has so far handled the increased speed and power perfectly.
The truck drives extremely well - you should replace the stock tires though. While they're alright to start out with and look great, this truck deserves some better shoes, and handles better with them.
The shocks are extremely good. This truck was made for sick jumps, and the shocks soak it all up.
My only wish is that the truck came with a motor mount compatible with 40mm motors out of the box. The stock power plant is fine, but is geared WAY low and gearing options are limited. The 4074 2350kv motor and 16t pinion I installed REALLY unleashed the monster in this platform, and it handled much better than I expected. Now it can bash with the best.
It's not all bad with the stock motor, though, as it's still capable of doing sweet jumps, has really good battery runtime, and extremely low running temperatures.
I feel that this truck offers some of the best value on the RC brushless offroad truck market today. In Europe, it is THE best value, no competition, period.
I'm thinkin

hello
Turnigy 5000mAh 4S1P 14.8V 20C hardcase pack
sont la taille max!!!!
elles rentrent pilpoil
les roues sont normes

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

hello
Turnigy 5000mAh 4S1P 14.8V 20C hardcase pack
sont la taille max!!!!
elles rentrent pilpoil
les roues sont normes

Customer files
bar de renfort Download [207]
Upload your file

Only registered users can upload files.
Please log in or register to start helping your fellow hobbyists today!

Combine Essential Items and Save