BL 2030-16 Brushless Inrunner Motor 5800kv
Battery: 2S/7.4V (42900 rpm)
No load current: 1.2A
Dimension: 20mm x 32mm, 48mm(with shaft)
Diameter of shaft: 2mm
Length of front shaft: 12mm
Suited for Mini EDF or micro brushless cars.
Bought it as a replacement for the 1/18th Stadium Truck
You can use the BL 2030-16 but you will need 2.5mm screws (not included - 6mm long) work on the motor mount (make a 10mm center hole filing the holes to match the motor ones) Pinion must be pushed further than the axis wants it to (there is a flat place for the grub screw which can't be used)
So it is possible but not a drop in replacement at allPoor shaft quality, shaft break at the first run on edf 48mm.
any probleme with my walkera 2040 3200kv.Any high kV high revving motor like these will easily suffer heat problems if cooling is not provided.i used this motor for my racing buggy 1:16, very fast,... but after 10 minute, the shaft is broken... :(insane motor on the 118B truck! a little more top speed than the stock motor. it still flys over the ground. the stock motor on the 118B is 5500KV this motor is insane (on 2S as the car would not need or take 3S)this is a good motor for 1/18 scale racing. im going with the 1/18 th scale 18amp speed controller for this motor what a great value!