Turnigy MultiStar BLHeli-S Rev16 ESC's are the latest generation of speed controllers designed specifically for multirotors (drones). They are super simple to install and very easy to set up.
These ESC's have superior performance and utilise hardware generated motor PWM for smooth throttle response. Another feature of these ESC's is Oneshot125 which is a faster communication protocol between the flight controller and the ESC on your multirotor. It allows the flight controller to send commands to the motor quicker allowing faster acceleration, regenerative braking and active freewheeling.
The BLHeli-S Rev16 30A has masses of programming parameters (see the list below) and can be programmed easily from your transmitter or using the MultiStar programming card. The ESC comes pre-tinned and solder ready, all you need to do is solder the supplied wires to the ESC and then add the plugs/sockets of your choice. With its small lightweight design, these ESC's will have you racing faster without breaking the bank.
These ESCs can be flashed with the latest DShot150 and DShot300 firmware.
• Small and lightweight (only 9.1g)
• S code for superior performance
• Smooth and linear control
• Oneshot125 for rapid throttle response
• Compatible with DShot150 and DShot300 firmware
• Regenerative braking
• Active freewheeling
• Beacon functionality
• Stalled motor protection
• Throttle signal loss protection
• Safe power-on (throttle lockout)
• Thermal protection
• Startup power
• Commutation timing
• Demag compensation
• Rotation direction
• Beep strength
• Beacon strength
• Beacon delay
• Throttle range
• Thermal protection
• Low RPM power protection
• LED control
Constant Current: 30A
Peak Current: 35A
Input Voltage: 2~4S (7.4~14.8V)
Dimensions: 28 x 13mm
These ESC's are really high quality and work very well with my 2205-2600kV motors. The ESC is so small yet packed with a lot of power, which is great. The BlHeli_S firmware works like a charm and the ESC's were able to be set up quickly and without problems.J'ai acheter 4 de c'est ESC et je suis très satisfait.
J'utilise c'est ESC sur deux bimoteurs, aucun problème
très bon produit.Sono discreti e facili da soldareI use these on my S500 quad with multistar 2216-800 motors. They are a bit overkill for my setup, but I wanted to reuse them when I upgrade to a bigger hex. They work flawlessly on the price is good as well!