Brushless 10A ESC for micro helicopter such as MCPX etc.
Cutoff voltage: 3V/6V
Really nice with my mcpx improved with brushless motor. I just soldered the motor's wires to the ESCThis is a great ESC, and I used it for Walkera Super CP. Use BLheli configure to your liking. With motor C05M Micro brushless outrunner 11000kv great combination!This ESC works great on my mcpX V2 with C05M or M05 motors. Easy to program with tool stick or radio, I am using the Governor mode TX with 65pcnt motor at 4873rpm. I most likely will get another one for my nano cp. make sure you buy a round three pin connector to plug into this ESC from your motor. Thanks for a great productguter regler fr den mcpxBestens fr den Blade MCPXI had to solder the motor wires direct to the esc to prevent voltage loss from the connector. Put on a jst instead of the stock mcpx plug. Running a 14,000kv, 9 tooth pinion, 600mah nanos. 6 min flight times and awesome 3d power! :)Good ESC for MCPx, Mini CP, Genius CP and possibly 1S V120D02S. Runs BLHeli code and hasa a flashing stick available for purchase.
The flashing stick allows you to upgrade and change settings on the ESC. Another alternative would be a Arduino board, search for BlHeliBox on google.
Same ESC is sold at aprox. twice the price at other stores. Get it!Excellent ESC. I flashed it with BlHeli code 9 to use it with an HP06v2 on my mcpx. No converter needed and governor mode easy to setup.
No File Name download now [0kb] v1 signal spot download now [240kb] 10 flashing plug side download now [835kb] 10a signal side download now [726kb] Signal Point to Solder download now [529kb]