BSR Racing M.RAGE 1/10 4WD M-chassis (Un-assemble kit) 210mm long, almost touching the ground, with just the right balance of stiffness and flexibility and a body that is sure to make you relive your boy racer days, when every road was your own personal race track in your Suzuki Swift, Ford Escort or Mini Cooper (depending when you were born) and the thrill of a well balanced car was more important than all out speed. Those days when you'd spend hours building a 1/24th scale replica of your little pride and joy in the garage.
The M.Rage is not only the first true on-road racing kit to be launched by Basher’s BSR Racing brand but, we have finally come out with something that our car customers have been constantly asking us for… a build it yourself kit, so you can enjoy the experience of bringing your car to life, right down to painting its neat little Suzuki Swift body.
If you're a racer or serious basher you'll love the tough carbon fibre chassis, carbon reinforced plastics for the swing arms and gearboxes, ball diffs front and rear, silky smooth aluminium shocks and a range of option parts to keep even the most competitive drivers happy.
Because this car is so small, light and nimble you don't need a super fast brushless system to have fun, in fact we set it up with an old school 27T brushed motor for the video shoot and it was more than enough power to whip around an on-road track.
This is a genuine race car just in a smaller package than normal. So relive those halcyon days of building your own models and tearing up the streets with your hot hatch and get yourself the M.Rage from BSR.
• Fully compatible with Tamiya M size body and wheels
• Fiber structure chassis
• New designed rear arm mount
• Steering rail system
• Use full size 1/10 on-road electronic
• Shaft drive 4WD with ball diff.
• Adjustable aluminum shocks
• Full spare and option parts list support
• Included clear lexan body, rims and tires
Track width: 165mm
Tire width: 24mm
Wheel diameter: 56mm
Hex size: 12mm
Internal ratio: 2.35:1
2CH radio system
2S 7.4V Lipoly battery (Standard pack/Shorty pack)
Standard size servo
Componenti di ottima qualita', soluzioni originali e compatte, fori su plastica e carbonio molto precisi, viteria durevole e marchiata, carrozzeria perfetta con decals m.rage proprio belli, unica pecca il manuale poco specifico. Il kit e' adatto a chi ha gia' un po di esperienza di assemblaggio modelli.I wanted M-size car and this was on sale and it was a kit which is a bonus because I like building kit. This is very nice kit with some great parts that you wouldn't see in anywhere else in this price raige. It even comes with body, wheels and tires. You can use normal 1/10 electronics. Overall i'm very happy with my purchase.I love this kit. It took a couple of days to build it, and get it sorted out. Buy a low profile servo so a regular size ESC can fit. Pay attention to shimming the servo so that the drag link is perfectly horizontal. Also check for steering interference because the drag link can rub the center drive shaft if your adjustments are wrong. If you want more steering, use the tie rod link hole closest to the hub, and back off your servo limits on your transmitter until you clear the drive shaft. Very fun to drive!Nice little car, very fun with a 17.5 motorNice little car, very fun with a 17.5 motorPtit kit très sympa on en a en pour son argent ...avec un 5000kv la voiture est très très performante mesuré à 84km/h avec le pignon d origine 31 en 48dp...le carbone et le plastique sont de très bonne facture (la visserie un peu moins) le montage se fait très bien ~5h se qui est très correct
les reglages d origine préconisés dans la notice sont étonnement très bons....de la voiture est franchement fiableVon der Qualität her ein super M Chassis. Die Kugelpfannen sollte man allerdings gegen bessere tauschen da sie etwas viel Spiel haben und leicht mal abspringen. Etwas schwieriger abzustimmen als ein Tamiya M Chassis aber wesentlich schneller. Wenn man etwas googelt findet man auch Shops mit den Ersatzteilen.Awesome car! not perfect tho, keep a keen eye on those diffs every few runs and when you first get the car unscrew the diff and apply generous locktite to the bolt. Check the shocks as well, sometimes they are leaky. This said, I've raced tamiya minis for years and this runs circles around them. Durable so far, it's been raced half a dozen times and ran in practice every oppurtuneity i get and other than links popping out no breakages... yet. I would still urge hk to carry more spares.
I was banned from racing it lately at 2 tracks so far but I am pushing to make it a class at my local one. So far a few guys have picked up kits and every time I run it people come look at it as it drives like a touring car and looks like a mini.
a great product and great value, would love to see hop ups like gear diff with aluminum or steel outdrives out backthis is one of the best kits/cars i have ever owned, drives beautifully, would be easy to use as a real race chassis. only issue was the servo saver wouldnt fit my hitec servo, i ended up using an old one from my hpi e10. definately recommend this to everyone.Recived my kit yesterday missing hub carrier cant finished car come on hobbyking where is the QC ?
My M-RAGE ! download now [409kb] ValbyzRacing1 download now [1.77Mb] ValbyzRacing2 download now [1.81Mb] ValbyzRacing1 download now [1.77Mb] M.Rage Valbyz download now [1.37Mb] Basher M-Rage download now [1.23Mb] M-Rage paint job. download now [1.14Mb]