New Items Forum
Register

Total Price

$0.00

Cart 0 Cart 0 Loading...

C2028 Micro brushless Outrunner 1400kv (22g)

C2028 Micro brushless Outrunner 1400kv (22g)

Shipped From:
  • USA
  • Global
QTY:

Now save save $0.00 $0.00

$12.83
Status:
In Stock
SKU:
C2028/20
WANT FREE SHIPPING? Click here to find out more!

Specifications.
Diameter: 20.2mm
Length: 28mm
Shaft: 5mm
Weight: 22g (with 10cm wire)
Power: 90W
Kv: 1400rpm/v
Turns: 20
Resistance: 573
Idle Current: .2A
Max amp: 12A (15sec burst)
Voltage: 2-4cell Lipoly


We do not have a suggested prop size for this little motor yet.
Once we have the data, we will include it within this listing.

  • SKU C2028/20
  • Brand Other
  • Shipping Weight 49.0000
  • Length 65.00
  • Width 40.00
  • Height 40.00
  • Kv(rpm/v) 1400.00
  • Max Current (A) 12.00
  • Resistance (mh) 573.00
  • Max Voltage(V) 15.00
  • Power (W) 90.00
  • Shaft A(mm) 2.00
  • Length B (mm) 23.00
  • Diameter C(mm) 20.00
  • Can Length D(mm) 14.00
  • Total Length E(mm) 31.00
Upload video

Only registered users can upload video. Please, log in or register

Only registered users can write reviews. Please, sign in or sign up

The included o-rings were useless (way too large/loose even for an APC SF 10x4.7), but that's my only real complaint. Very quiet little motor with plenty of power for its size.

verified_user Quality:
playlist_add_check Overall:
trending_up Value:

The included o-rings were useless (way too large/loose even for an APC SF 10x4.7), but that's my only real complaint. Very quiet little motor with plenty of power for its size.

Hi I think this might be a good motor it looks OK, sadly finding a prop to fit seems to be a problem although the specifications show a shaft/propeller fitment of 5 mm this is incorrect as the actual diameter is 5.4 mm which is the problem .

playlist_add_check Overall:
trending_up Value:
verified_user Quality:

Hi I think this might be a good motor it looks OK, sadly finding a prop to fit seems to be a problem although the specifications show a shaft/propeller fitment of 5 mm this is incorrect as the actual diameter is 5.4 mm which is the problem .

I bought this wasent wat I expectid

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

I bought this wasent wat I expectid

Small and powerful engine! A good choice for ParkFlyer.

I tested it with a battery and a screw 2s500mah GWS 10 * 4.3.

Motor lukewarm! Recommended for use with 3s pack

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

Small and powerful engine! A good choice for ParkFlyer.

I tested it with a battery and a screw 2s500mah GWS 10 * 4.3.

Motor lukewarm! Recommended for use with 3s pack

Wie alle Turnigy Motoren einfach Top!

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

Wie alle Turnigy Motoren einfach Top!

This motor is bad. I am disaponted whit this mootor.

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

This motor is bad. I am disaponted whit this mootor.

Diciamo un buon motore, considerando che ormai tutto viene da l....

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

Diciamo un buon motore, considerando che ormai tutto viene da l....

perfect motor for little airplane up to 400g slow flyer "polyclup EPP" outdoor/indoor.

mounted whith 800mha 2s



a realy nice product !



thx hk ! :*

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

perfect motor for little airplane up to 400g slow flyer "polyclup EPP" outdoor/indoor.

mounted whith 800mha 2s



a realy nice product !



thx hk ! :*

This is a great motor!

Will drive any plane weighting around 100grams really fast!

I'll be using it in a conventional F3P-A shock and will post results later!

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

This is a great motor!

Will drive any plane weighting around 100grams really fast!

I'll be using it in a conventional F3P-A shock and will post results later!

It's a little noisy when rotated by hand it seems the rotor touches the stator. Maybe the bearings are not so good.

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

It's a little noisy when rotated by hand it seems the rotor touches the stator. Maybe the bearings are not so good.

  1. 1
  2. 2
  3. 3
Upload your file

Only registered users can upload files.
Please log in or register to start helping your fellow hobbyists today!

Related Tags