New Items Forum
Register

Total Price

$0.00

Cart 0 Cart 0 Loading...

C2222 Micro brushless Outrunner 2850kv (15g)

C2222 Micro brushless Outrunner 2850kv (15g)

Shipped From:
  • USA
  • Global
QTY:

Now save save $0.00 $0.00

$12.63
Status:
In Stock
SKU:
C2222/25
WANT FREE SHIPPING? Click here to find out more!

Specifications.
Diameter: 22.2mm
Length: 24mm
Shaft: 5mm
Weight: 15g (with 10cm wire)
Power: 60W
Kv: 2850rpm/v
Turns: 25
Resistance: 485
Idle Current: .7A
Max amp: 10A (15sec burst)
Voltage: 2-4cell Lipoly


We do not have a suggested prop size for this little motor yet.
Once we have the data, we will include it within this listing.

  • SKU C2222/25
  • Brand Other
  • Shipping Weight 49.0000
  • Length 65.00
  • Width 40.00
  • Height 40.00
  • Kv(rpm/v) 2850.00
  • Max Current (A) 10.00
  • Resistance (mh) 485.00
  • Max Voltage(V) 15.00
  • Power (W) 60.00
  • Shaft A(mm) 3.00
  • Length B (mm) 17.00
  • Diameter C(mm) 22.00
  • Can Length D(mm) 6.00
  • Total Length E(mm) 31.00
Upload video

Only registered users can upload video. Please, log in or register

Only registered users can write reviews. Please, sign in or sign up

I am running a couple of these on 3S setups and 5x5 props on a flying wing. I checked today and it is peaking at 20A so obviously too much prop. It is getting too warm also. So far, a dozen flights and it is still running. I will drop the prop down to around 4x4 and hopefully get the power in a better range for this little motor. I like it.

trending_up Value:
verified_user Quality:
playlist_add_check Overall:

I am running a couple of these on 3S setups and 5x5 props on a flying wing. I checked today and it is peaking at 20A so obviously too much prop. It is getting too warm also. So far, a dozen flights and it is still running. I will drop the prop down to around 4x4 and hopefully get the power in a better range for this little motor. I like it.

I am running a couple of these on 3S setups and 5x5 props on a flying wing. I checked today and it is peaking at 20A so obviously too much prop. It is getting too warm also. So far, a dozen flights and it is still running. I will drop the prop down to around 4x4 and hopefully get the power in a better range for this little motor. I like it.

trending_up Value:
verified_user Quality:
playlist_add_check Overall:

I am running a couple of these on 3S setups and 5x5 props on a flying wing. I checked today and it is peaking at 20A so obviously too much prop. It is getting too warm also. So far, a dozen flights and it is still running. I will drop the prop down to around 4x4 and hopefully get the power in a better range for this little motor. I like it.

Mini Zagi

Envergadura 80cm Peso 257gr C2222 Micro brushless Outrunner 2850kv GWS EP Propeller (DD-4040 102x102mm) black ESC 18-20a Lipo Nano tech 1000a 25-50a.
Todo en Hobbyking

https://www.youtube.com/watch?v=MZc4x7z-Nlk

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

Mini Zagi

Envergadura 80cm Peso 257gr C2222 Micro brushless Outrunner 2850kv GWS EP Propeller (DD-4040 102x102mm) black ESC 18-20a Lipo Nano tech 1000a 25-50a.
Todo en Hobbyking

https://www.youtube.com/watch?v=MZc4x7z-Nlk

https://www.youtube.com/watch?v=MZc4x7z-Nlk

Mini Zagi

Envergadura 78cm
Peso 257gr

C2222 Micro brushless Outrunner 2850kv
GWS EP Propeller (DD-4040 102x102mm) black
ESC 18-20a
Lipo Nano tech 1000a 25-50a
Hobbyking

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

https://www.youtube.com/watch?v=MZc4x7z-Nlk

Mini Zagi

Envergadura 78cm
Peso 257gr

C2222 Micro brushless Outrunner 2850kv
GWS EP Propeller (DD-4040 102x102mm) black
ESC 18-20a
Lipo Nano tech 1000a 25-50a
Hobbyking

Nice motor be carful to the wire while you turn them back

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

Nice motor be carful to the wire while you turn them back

It overheads with 3 cell. Also hard to keep prop on. 4.75 x 4.75 prop is a bit much pushing wing wing. Wish this set up a #41 o ring works.

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

It overheads with 3 cell. Also hard to keep prop on. 4.75 x 4.75 prop is a bit much pushing wing wing. Wish this set up a #41 o ring works.

Propeller used disintegrates easily with the o-ring used. Risky during testing, I wish there is better shaft design to install the props.

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

Propeller used disintegrates easily with the o-ring used. Risky during testing, I wish there is better shaft design to install the props.

If you have holes bottom and front to cool it, no problem keeps fresh at 8,5 amps
with a stock of mine prop 5X3.5 : 200g pull and 8.5 AMps with 2 cells.
Prop saver is inadequate (for my stock props only) and CANT BE REMOVED : its part of the rotor.
You can use the back side because it has a 2 mm diameter by 5mm length at the stator.

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

If you have holes bottom and front to cool it, no problem keeps fresh at 8,5 amps
with a stock of mine prop 5X3.5 : 200g pull and 8.5 AMps with 2 cells.
Prop saver is inadequate (for my stock props only) and CANT BE REMOVED : its part of the rotor.
You can use the back side because it has a 2 mm diameter by 5mm length at the stator.

Hello,I replaced the stock motor on my mini swift with this one after I rebuilt the motor mount with a birch ply mount.Today I corrected the center of gravity by moving the battery back into the fuselage after removing the hump on the bottom of the fuselage.Maiden flight was successful and plane is fast even at half throttle.C2222 isa great little motor so far.Mike

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

Hello,I replaced the stock motor on my mini swift with this one after I rebuilt the motor mount with a birch ply mount.Today I corrected the center of gravity by moving the battery back into the fuselage after removing the hump on the bottom of the fuselage.Maiden flight was successful and plane is fast even at half throttle.C2222 isa great little motor so far.Mike

The bearings in this grind. I doubt that it's my fault. Not happy with it - and it isn't really powerful enough for the bonsai for my tastes. It won't go vertical. It gets hot on 2s with a 5030, but that's probably because of the bearings.

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

The bearings in this grind. I doubt that it's my fault. Not happy with it - and it isn't really powerful enough for the bonsai for my tastes. It won't go vertical. It gets hot on 2s with a 5030, but that's probably because of the bearings.

  1. 1
  2. 2
  3. 3
  4. 4
  5. 5
  6. ...
  7. 7
Upload your file

Only registered users can upload files.
Please log in or register to start helping your fellow hobbyists today!

Related Tags