Register

Product Finder

Settings

Useful links

 
[["US","AU","GB","DE"]]
Register
Shipped From:
  • Global
  • USA

C2226 Micro brushless Outrunner 1800kv (21g)

C2226 Micro brushless Outrunner 1800kv (21g)

QTY:

Now save save $0.00 $0.00

$12.35
Rating:
Stock:
Weight:
52 g
SKU:
C2226/25

Suggestion Box

Please let us know if you found any issues with this product listing.
We take our customer comments very seriously and in many cases our website modifications and product updates are a result of your comments!

Price War

If you've seen a product elsewhere for a better price, please let us know! HobbyKing pride themselves on offering the best price, so if there if you see something cheaper elsewhere, let us know!

Product
Description

Specifications.
Diameter: 22.2mm
Length: 28mm
Shaft: 3mm
Weight: 21g (with 10cm wire)
Power: 70W
Kv: 1800rpm/v
Turns: 25
Resistance: 657
Idle Current: .5A
Max amp: 10A (15sec burst)
Voltage: 2-4cell Lipoly


We do not have a suggested prop size for this little motor yet.
Once we have the data, we will include it within this listing.

Product
Specifications

Additional Information

  • SKU:
    C2226/25
  • Brand:
    No
  • Weight(g)
    52.00
  • Length
    65.00
  • Width:
    40.00
  • Height:
    40.00
  • Kv(rpm/v)
    1800.00
  • Max Currents (A)
    10.00
  • Power (W):
    0.00
  • Length B (mm):
    20.00
  • Can Length D(mm)
    10.00
  • Max Voltage(V)
    14.00
  • Shaft A(mm):
    2.00
  • Unit Weight (g):
    21
  • Diameter C(mm)
    22.00
  • Total Length E(mm)
    35.00
  • Resistance (mh):
    657.00
Community
Discussions
Rate&
Review

Write Your Own Review

Only registered users can write reviews. Please, sign in or sign up

Quality
Value
Overall
love this motor use it on a 600mm wing with a 3s lipo, 6x4 apc prop, and a 10 amp turnigy esc little thing scoots run battery after battery no problems.
Quality
Value
Overall
Quality
Value
Overall
vorsicht- alles ein bischen d?nn und leicht gebaut. Bei dem Auswechseln der Welle aufpassen sonst bricht alles.
Quality
Value
Overall
Quality
Value
Overall
perfect motor all the way, I am using 4 of these motors and love them, they work flawlessly and are cheap! I think they are the best deal for this size motor
Quality
Value
Overall
Quality
Value
Overall
These motors may work ok and are quite strong...

but it is almost IMPOSSIBLE TO MOUNT THESE things like you want to. I've had to try 3D printing several different propeller and motor mounting methods to get these to fly my quadcopter. The shaft is TOO SHORT. grr... lots of time wasted just trying to mount these things.
Quality
Value
Overall
Quality
Value
Overall
put this motor on the outside of firewall on the HK mini stick arf. what a performer for such a little guy!! I have a 850mah 2S stuffed into the nose hatch (hence outside firewall mounting) and a plush 12A esc and a caseless 615rx directly in front of the elevator and rudder servos. this motor is super easy to install, just drilled 1.5mm holes and threaded screws then ca just like servo mounting. holds firm because its so little. using an apc 6x5.5 prop drawing 7.8 - 8.5 amps depending on battery. zips right along on this small model, and im sure would be great for anything in the 100-150g rtf weight range.
Quality
Value
Overall
Quality
Value
Overall
I use six of this motors for my shrediquette mm6 multiwii clone and they perform great. Using them with the turnigy plush 10a esc and gws 5x3 three-blade-props.

After a big crash one shaft is bend, but this does not affect the review, cause every motor would have been damaged in this crash.

Quality
Value
Overall
Quality
Value
Overall
Good fast motor! I works flawlessly! I put in the park airplane weighing 240 grams. Battery 2s500mah, Prop 8x6
Quality
Value
Overall
Quality
Value
Overall
strong motor, prop save doesnt hold prop too well, it wobbles off at hi speed.need to look for a smaller rubber o-ring. doesnt heat up a lot, running 3S 1250 mAh. 7x35 prop, zoom-zoom-zoom!
Quality
Value
Overall
Quality
Value
Overall
Used the wrong prop, stupid because the motor became a smoker.
Quality
Value
Overall
Quality
Value
Overall
Great Motor on 2S with 7x4 APC prop, pulls my 7.5 oz scratchy almost vertical. Only 3 stars as I fried the motor within 1 minute with a 3s with the same 7x4 prop. This is a great 2S motor but it can not even handle a 3s without a load on it. Do not use this motor with a 3s lipo or it will be FRIED!!!!!!!!
Quality
Value
Overall
View all reviews
Upload
Videos
Upload video
Upload
Files

Only registered users can upload files. Please log in or register to start helping your fellow hobbyists today!

Product Tags

Use spaces to separate tags. Use single quotes (') for phrases.