Become a Supplier Blog New Items
Register

Total Price

$0.00

Cart 0 Cart 0 Loading...

Canadair CL-84 Dynavert Tilt-Wing VTOL PNF

Generating Links

Canadair CL-84 Dynavert Tilt-Wing VTOL PNF

Price:

Now save save $0.00 $0.00

$293.31
Already Purchased Discontinued Product

Please continue searching for a similar product.
SKU:
267000005-0
want FREE shipping? Click here to find out more!

How about this for a truly exotic and rare bird?

This is a scale model of the amazing Canadair CL-84 Dynavert STOL/VTOL aircraft developed from 1964 to '72 and extensively tested by Canadian, US Navy/Marine and RAF pilots during that period, demonstrating excellent handling characteristics in a wide range of roles including troop deployment, radar surveillance, gunship and anti-submarine warfare in addition to carrier trials aboard the USS Guam and USS Guadalcanal.

With its tilting, high lift wing, the CL-84 was at the cutting edge of technology for its time and renowned for its straightforward flight handling.

Our model represents CL-84 402 that took part in the carrier trials and later flew onto the White House lawn in Washington DC. In a highly successful flight testing program the CL-84 completed over 700 flights and was flown by 36 pilots. Despite the success of the concept no orders were forthcoming and the CL-84 project was cancelled in 1974.  

The flying characteristics of the original are reproduced in the model by the pre-installed flight controller. Transition from vertical to horizontal flight and back, motor control and stabilization are managed by the flight controller so that a single switch can be used for this function. True to scale, pitch control is assisted by a horizontally mounted propeller at the tail, which is also managed by the flight controller. 

A fully assembled wing-tilt mechanism makes light work of assembly, so your own CL-84 Dynavert can be in the air quickly, needing only your choice of 6 channel RC system and a 4S 2600mAh LiPoly battery to get you there. 

This is a nicely finished scale model of a unique aircraft that is sure to turn heads wherever it is flown.

Specs:
Material: EPO (airframe)
Wingspan: 950mm
Length: 1050mm
Height: 340mm
Wing Motors: 2 x 900KV Outrunner
Tail Motor: 1 x 850KV Outrunner
ESC: 2 x 40A brushless, 1 x 20A brushless (for Tail Motor)
Flying weight: 1700g

Included:
1 x Canadair CL-84 Dynavert VTOL
Flight controller (installed)
Motors
Propellers
Undercarriage
All hardware
Manual

Required:
6 channel RC transmitter and receiver
4S (14.8V) 35C 2600mAh LiPoly battery
Foam safe adhesive

Please note that this model comes equipped with a T style battery connector so you may need to purchase a suitable adapter for your chosen battery. (See related items.)

Upload video

Only registered users can upload video. Please, log in or register

Topics
Sort by
Most Recent Topics
* Nickname:

* Your Reply:


Please, enter the text shown in the image into the field below
*Verification Code:
Cancel
Submit
Post a new Topic
* Nickname:

* Your Topic:



Please, enter the text shown in the image into the field below
*Verification Code:
Post Topic

Only registered users can write reviews. Please, sign in or sign up

| Verified Buyer

  • Overall
  • Quality
  • Value

Certified Buyer Rated

Oct 16, 2016

Muy lindo modelo a escala todavia no he tenido tiempo de probarlo pero no se como sera el despeque vertical me da un poco de miedo. la calidad de construccion es muy buena. Espero que de buenos resultados.

Frank | Verified Buyer

  • Overall
  • Quality
  • Value

Customer Rated

Oct 05, 2016

Das Modell hat sehr gute Flugeigenschaften. Senkrechtstart, Übergang in den Normalflug und wieder zurück zur senkrechten Landung waren völlig problemlos. Leider blieb nach dem sechsten Flug kurz nach dem Start ein Motor stehen und das Modell stürzte ab und wurde schwer beschädigt. Ursache war eine schlechte Lötstelle zwischen Regler und Motor, die vom Hersteller verursacht war. Hobby King weigerte sich, Ersatz zu leisten. Darum lieber Finger weg, wegen schlechter Verarbeitungsqualität.

Jim | Verified Buyer

  • Overall
  • Quality
  • Value

Customer Rated

Jan 29, 2016

Amazing engineering in this model. I have yet to fly it outdoors (winter here), but have taken it to indoor flying sessions for hover practice. I did the mod for nose wheel steering by adding an extra servo in the nose and that works very well. Hover take-off is easy and initially I found it extremely sensitive to any stick movement. After putting in some expo for the ail/elev/rudder it became much easier to manage.
Be very careful to maintain power in hover and don't cut it too fast. A good hard landing will pop off the poorly factory glued main landing gear (easy to properly repair). The nose gear is also pretty lightly assembles with 1/8" ply, glue, and 4 screws holding it together. Make sure you take the nose gear assembly apart and use a strong flexible glue (Foam-Tac) to put it back together.
The scale factor is pretty loose with the nose, wing, and cabin graphics, but Callie has the accurate scale decals available which will bring it up to true scale appearance.

frank100 | Verified Buyer

  • Overall
  • Quality
  • Value

Customer Rated

Jan 15, 2016

Great plane! Nice model. The foame is not of superior quality, but it is ok.
It is a superb model for its price.
I put KK2.1 with OpenAero1.3 inside, which works well. I tried hovering and flying. As soon as there will be lesser wind (and no rain), I will try the transition.

https://youtu.be/_7c96CBaUfk

Customer files
Manual Download [533]
ZTW Beatles ESC Manual for CL-84 Dynaver Download [1468]
Anleitung komplett in Deutsch Download [11487]
Anleitung komplett in Deutsch Download [11487]
Upload your file

Only registered users can upload files.
Please log in or register to start helping your fellow hobbyists today!

Accessories