Total Price

$0.00

Cart 0 Cart 0 Loading...

CC3D Atom OpenPilot Flight Control Board Authorized (Horizontal Pins)

Generating Links

CC3D Atom OpenPilot Flight Control Board Authorized (Horizontal Pins)

Already Purchased Discontinued Product

Please continue searching for a similar product.
SKU:
9171000593-0
want FREE shipping? Click here to find out more!

The CC3D ATOM boards are an all-in-one stabilization hardware that run OpenPilot firmware.
It can fly any airframe from Tri, Quad, Hex, Octocopters as well as fixed wing aircraft and is configured and monitored using the OpenPilot Ground Control Station (GCS) software.

This latest revision features improved gyros and uses the powerful OpenPilot architecture and the cross-platform Ground Control Station (GCS).

CopterControl from the OpenPilot project introduces a new generation of multi-purpose aircraft stabilization platforms and has been designed from the ground up to perform the following functions:

• MultiRotor controller with auto-level, including TriCopters, QuadCopters and HexaCopters
• Flybarless Helicopter controller with auto-level - Experimental
• Fixed Wing UAV controller - Experimental

Flexi port
The innovative Flexi-port provides either I2C connectivity or a second serial port. Flexi-port gives Copter Control the flexibility to use either I2C and a single serial port or dual serial ports, according to your connectivity needs.
 
Superior user experience
OpenPilot has tried to make your experience with the CC3D as easy and trouble-free as possible. The hardware is complete; there is no soldering required.
The included RC harness allows you to connect any standard PWM receiver, are tested before shipping and come with bootloader already flashed.
A standard mini-USB cable (not included) is used to load the latest firmware and configure everything for your unique airframe.
 
The OpenPilot project is trying to make Open Source much more user friendly. OpenPilot software is designed to be used by everybody! All major operating systems are supported and install packages are provided. The GPLv3 licensed software is all free and not only are you welcome to hack it, but we encourage it!

Sensors and Components:
• 3-axis Gyroscope array and 3-axis Accelerometer: MPU-6000
• Supports common RC inputs: 6 PWM channels, combined PPM, Spektrum/JR DSM2, DSMJ, DSMX satellites, and Futaba S.Bus receivers.
• Simultaneous support for multiple receivers.
• Receiver Port functions (configurable): 6 PWM input channels or combined PPM stream, 4 PWM output channels
• Main Port functions (configurable): serial telemetry (default), GPS, S.Bus, Spektrum/JR satellites
• Flexi Port (configurable): serial telemetry, GPS, Spektrum/JR satellites, or I2C peripherals (under development)
• Camera stabilization: supports up to 3-axis camera mounts with stabilization and manual control from any of configured receivers.
• Onboard USB connectivity for easy configuration.
• USB and serial telemetry and configuration
• Supported by powerful OpenPilot GCS
• 3C Quaternion based filter running at 500Hz

Features:
• Powerful STM32 32-bit microcontroller running at 90MIPs with 128KB Flash and 20KB RAM.
• 3-axis high-performance MEMs gyros and 3-axis high-performance MEMs accelerometer.
• Tiny 4 layer PCB for superior electrical noise reduction and flight performance.
• Software support for Windows, Mac and Linux.
• Direct high speed USB support with no drivers required, a truly plug and play device.
• Spektrum satellite receiver support.
• Futaba S-BUS hardware support.
• Innovative Flexi-port technology for superior port flexibility.
• 4Mbits on-board EEPROM for configuration storage.
• 10 PWM outputs to servos, ESCs or for camera stabilization

Specs:
Size: 43 x 20 x 15mm
Weight: 13.5g (including leads)

Included:
1 x OpenPilot Atom CopterControl Board
1 x OpenPilot Serial Cable
1 x OpenPilot CopterControl RC Receiver Cable 

**** NOTE: The HobbyKing ATOM CC3D board is fully authorized by OpenPilot and built using there schematics and quality import parts, unlike the ones available elsewhere using a reverse engineered layout missing capacitance with ground feedback issues.

OpenPilot software is designed to be used by everybody! All major operating systems are supported and install packages are provided. The software is all Free software under the GPLv3 license and not only are you welcome to hack it, but we encourage it! www.Openpilot.org

  • CC3D OpenPilot fixed wing Stabilisation
Upload video

Only registered users can upload video. Please, log in or register

Only registered users can write reviews. Please, sign in or sign up

Enrico | Verified Buyer

  • Quality
  • Value
  • Overall

Customer Rated

Sep 04, 2016

I get this CC3D but I've seen that two pin for output are soldered together. I've opened the box and repaired the pin. Quality is exactly the same for other cc3d (china clone).

| Verified Buyer

  • Quality
  • Value
  • Overall

Certified Buyer Rated

Jul 27, 2016

nice size for any 200mm & smaller quad, easy to set up evn for a biggener

grits | Verified Buyer

  • Quality
  • Value
  • Overall

Customer Rated

Jun 25, 2016

Mine was great, for about two weeks, then it died. I also bought a vertical pin one from the AU warehouse and it was dead on arrival. These don't appear to be good quality at all, no better in my experience than the cheap bong good ones. Thank goodness I still had my KK board for a fallback. I'll try naze32 now and see if they're any better. At least they can't be worse. My experience with this product says stay away.

Evil Pusher | Verified Buyer

  • Quality
  • Value
  • Overall

Certified Buyer Rated

Jun 25, 2016

works great - for my HK450 FBL DFC - LIKE

| Verified Buyer

  • Quality
  • Value
  • Overall

Certified Buyer Rated

Jun 04, 2016

works great and very compact, runs on openpilot or librepilot.

| Verified Buyer

  • Quality
  • Value
  • Overall

Certified Buyer Rated

May 28, 2016

.this is small so that good to racing drone

Jaco Engelbrecht | Verified Buyer

  • Quality
  • Value
  • Overall

Customer Rated

Nov 13, 2015

Also have a problem using this with sbus on a Taranis/x4r tx/rx. Tried a x6r and x8r - not working. While connected by usb and then applying power sbus is working 100pcnt, but when only connecting a lipo the cc3d don`t initialize. If you remove the signal from rx and power up it initialize and then you can replace signal and sbus will work. Another cc3d going to the dustbin

tonydelava | Verified Buyer

  • Quality
  • Value
  • Overall

Certified Buyer Rated

Nov 12, 2015

cette carte de vol marche vraiment tres bien.dommage que le logiciel openpilot ais quelque soucis en ce moment.cependant on peut la flasher avec d'autre firmware.vraiment content de cette carte qui offre une tres bonne stabilisation.dans openpilot vous pouvez trouver une configuration deja definie pour le zmr 250 qui peut deja depanner les debutants qui ne connaissent pas exactement les reglages de pid.

| Verified Buyer

  • Quality
  • Value
  • Overall

Certified Buyer Rated

Jul 28, 2015

I changed my CC3D Openpilot vertical pinned full sized model (36x36mm) for this one. The horizontal pins make it much easier to install in tight places. It functions just like its the CC3d just in a lot tighter package. This is an HK licensed version of the OpenPilot.org Atom. So far all the controlls and firmware updates have installed without a hitch. This little flight controller is about the size of a pack of juicy fruit gum.

Helimike1976 | Verified Buyer

  • Quality
  • Value
  • Overall

Customer Rated

Jun 05, 2015

ok recieved it, smaller then I thought, and thats good. still have to flight test it with my heli, 450 class. trex clone. going to use a HK dfc pro head, on a 450sev2 frame, had to mod frame for swash plate and drill 2 new holes. now just a new speed controller and some other parts and I let you all Know. :)

Customer files
CC-3d_heli Wiring Download [74]
Heli_setup Download [3551]
Upload your file

Only registered users can upload files.
Please log in or register to start helping your fellow hobbyists today!

Accessories