Register

Product Finder

Settings

Useful links

Live Chat
 
[["US","AU","GB","DE"]]
Register
Shipped From:
  • USA

Turnigy HS1177 1/3 Sony Color HAD II CCD Camera for FPV (PAL)

Turnigy HS1177 1/3 Sony Color HAD II CCD Camera for FPV (PAL)

QTY:

Now save save $0.00 $0.00

$31.18
Rating:
Stock:
Weight:
68 g
SKU:
9805000001-0

Suggestion Box

Please let us know if you found any issues with this product listing.
We take our customer comments very seriously and in many cases our website modifications and product updates are a result of your comments!

Price War

If you've seen a product elsewhere for a better price, please let us know! HobbyKing pride themselves on offering the best price, so if there if you see something cheaper elsewhere, let us know!

Product
Description

Well, the guys at Turnigy have come up with another high-performance FPV camera. The HS1177 uses a Sony 1/3 Super HAD II CCD image sensor with 650TVL resolution and outstanding image quality. 

The package comes with a camera mount, so you can angle the camera to your needs, plus an in-line OSD Menu Key making it easy to change your camera settings while looking through your goggles. 

The camera will work using a wide range of operating voltages, 5V to 22VDC, so it will work with most (2S~5S) Lipoly battery packs. Digital Wide Dynamic Range (D-WDR) and 2D Noise Reduction (2DNR) work well together to give better clarity and image definition in all light conditions. 

With a low price point and superb quality, this is a must have CCD camera for all your FPV needs.

Features:
• Color FPV camera with 1/3 Sony Super HAD II CCD
• Pixel: PAL:752x582 (HxV)
• IR Block
• High sensitivity, low smear, high anti-blooming
• Economical, furnished with 2.8mm lens
• Auto Electronic Shutter (AES), Auto Gain Control (AGC)
• DC type, low power consumption (DC5V-22V)
• Inline OSD Menu Key (5 buttons)

Specs:
Horizontal resolution: 650 Horizontal TV lines
Minimum Illumination: 0.01 Lux / F1.2
Auto electronic shutter: PAL: 1/50~ 1/100,000
S/N ratio: More than 50 dB
Lens: 2.8mm
Signal System: PAL
WDR: D-WDR
DNR: 2DNR
OST Set: Yes
Day/Night: Auto / Color/ B&W
Back Light Compensation (BLC): Yes
Auto Gain Control (AGC): Auto
Video Output: 1Vp-p / 75ohms
Power Supply: 5VDC- 22VDC (12VDC +- 10% (65mA))
Dimensions: 25x25x32mm
Net Weight: 12g

Includes:
1 x HS1177 CCD Camera
1 x OSD Menu Key
1 x Camera mount (with screws)
1 x OSD menu key to camera cable
1 x VTx to camera (or OSD menu key) cable
1 x Lens cleaning cloth
1 x Manual

.
Product
Specifications

Additional Information

  • SKU:
    9805000001-0
  • Brand:
    Turnigy
  • Weight(g)
    68.00
  • Length
    78.00
  • Width:
    53.00
  • Height:
    78.00
Community
Discussions
Rate&
Review

Write Your Own Review

Only registered users can write reviews. Please, sign in or sign up

trending_up Value
verified_user Quality
playlist_add_check Overall
Bought this as a gift so will report back.
trending_up Value
verified_user Quality
playlist_add_check Overall
playlist_add_check Overall
trending_up Value
verified_user Quality
This is a good camera, but only if you tune it the right way. Following the settings from youtube videos, this camera does very well in nearly every situation and thanks to wdr.
Its maybe not best looking video, but you can see every opstacle very well. So i would suggest this cam only for fpv use.
playlist_add_check Overall
trending_up Value
verified_user Quality
playlist_add_check Overall
trending_up Value
verified_user Quality
Good camera for fpv on my 250 quad
playlist_add_check Overall
trending_up Value
verified_user Quality
playlist_add_check Overall
trending_up Value
verified_user Quality
Not sure I like this camera.

First the pins are not the same as all other hs1177 so you have to replace your cable or switch your pins around in the connector.

Second, the OSD device provided is a pain in the neck and I still haven't been able to connect to it and tune my camera.

Third there is something goofy about the focal length; I cannot get a 1.8 lens to focus. if you have a ring on the lens it wont screw in far enough to focus and if you take the ring off it will focus but there is still a gap between the lens and the case so it's not locked in place.

Probably will not buy it again.
playlist_add_check Overall
trending_up Value
verified_user Quality
playlist_add_check Overall
trending_up Value
verified_user Quality
Not sure I like this camera.

First the pins are not the same as all other hs1177 so you have to replace your cable or switch your pins around in the connector.

Second, the OSD device provided is a pain in the neck and I still haven't been able to connect to it and tune my camera.

Third there is something goofy about the focal length; I cannot get a 1.8 lens to focus. if you have a ring on the lens it wont screw in far enough to focus and if you take the ring off it will focus but there is still a gap between the lens and the case so it's not locked in place.

Probably will not buy it again.
playlist_add_check Overall
trending_up Value
verified_user Quality
playlist_add_check Overall
trending_up Value
verified_user Quality
Not sure I like this camera.

First the pins are not the same as all other hs1177 so you have to replace your cable or switch your pins around in the connector.

Second, the OSD device provided is a pain in the neck and I still haven't been able to connect to it and tune my camera.

Third there is something goofy about the focal length; I cannot get a 1.8 lens to focus. if you have a ring on the lens it wont screw in far enough to focus and if you take the ring off it will focus but there is still a gap between the lens and the case so it's not locked in place.

Probably will not buy it again.
playlist_add_check Overall
trending_up Value
verified_user Quality
playlist_add_check Overall
trending_up Value
verified_user Quality
Not sure I like this camera.

First the pins are not the same as all other hs1177 so you have to replace your cable or switch your pins around in the connector.

Second, the OSD device provided is a pain in the neck and I still haven't been able to connect to it and tune my camera.

Third there is something goofy about the focal length; I cannot get a 1.8 lens to focus. if you have a ring on the lens it wont screw in far enough to focus and if you take the ring off it will focus but there is still a gap between the lens and the case so it's not locked in place.

Probably will not buy it again.
playlist_add_check Overall
trending_up Value
verified_user Quality
verified_user Quality
trending_up Value
playlist_add_check Overall
Seams a realy nice "all situation" cam for reasonable money.
THE MANUAL IS CRAP - DUE IT DOES NOT INCLUDE ANITHING ABOUT THE OSD PROGRAMMING (dip switch board) -> therefore 2 stars only.
Once you figured out HOW TO - teh Cam is GREAT !
verified_user Quality
trending_up Value
playlist_add_check Overall
verified_user Quality
trending_up Value
playlist_add_check Overall
Originally I was using my Mobius camera to fly FPV on my plane. I've since built a quad and wanted to try FPV again. I wanted a smaller camera so opted for this. I didn't know how bad the Mobius was!! (for FPV) This thing is awesome! It connected seamlessly to the Quanum Elite video transmitter. The OSD menu key is extremely helpful for setting the camera up. The fact I can focus it using the lock ring and twist is brilliant. The image quality is excellent along with the price. First flight was at dusk. This camera can almost see at night, something the Mobius could never do. Only issue I can think of is the lens cap. It falls off easily and is not a great fit. But heck, I can live with that!
verified_user Quality
trending_up Value
playlist_add_check Overall
verified_user Quality
trending_up Value
playlist_add_check Overall
Didnt test it. But based on reviews it is one of the better / best FPV cameras. Will do a review later.
verified_user Quality
trending_up Value
playlist_add_check Overall
View all reviews
Upload
Videos
Upload video
Upload
Files

Only registered users can upload files. Please log in or register to start helping your fellow hobbyists today!

Product Tags

Use spaces to separate tags. Use single quotes (') for phrases.