Total Price

$0.00

Cart 0 Cart 0 Loading...

Corona DS-929MG Digital Servo 2.2kg / 0.11sec / 12.5g

Generating Links

Corona DS-929MG Digital Servo 2.2kg / 0.11sec / 12.5g

Price:

Now save save $0.00 $0.00

$6.97
QTY:
Shipped From:
  • USA
  • Global
Already Purchased
Status:
In Stock
SKU:
C-DS-929MG
want FREE shipping? Click here to find out more!

Corona DS-929MG is a fantastic small powerful servo. Extremely popular with good speed and metal gear. A cost effective digital servo for small RC planes, cars and boats or updating plastic gear servos with metal gear ones. Precise control and minimal dead-band width, they are an excellent choice and recommended by our own electrical engineer, Nick.

Features:
• Ball bearing support
• Digital, with MOSFET Drive
• Metal gearing
• High Speed & High Torque


Specs:
Speed: 0.12 - 0.11sec/60deg @ 4.8v
Stall Torque: 2.0 - 2.2kg.cm @ 4.8v
Standing Torque: 2.2kg.cm/5deg hold out
Spline count: 21
Weight: 12.5g
Size: 22.5x11.5x24.6mm
Motor: Coreless

  • Servo Torque(kg)(min. 0.01kg) 2.20
  • Servo Speed (Sec/60deg) 0.11
  • Servo A(mm) 31.00
  • Servo B(mm) 23.00
  • Servo C(mm) 27.00
  • Servo D(mm) 12.00
  • Servo E(mm) 32.00
  • Servo F(mm) 22.00
attributeset-11
Close

Dimension Diagram Guide

  • attributeset-11

Close

Upload video

Only registered users can upload video. Please, log in or register

Topics
Sort by
Most Recent Topics
* Nickname:

* Your Reply:


Please, enter the text shown in the image into the field below
*Verification Code:
Cancel
Submit
Post a new Topic
* Nickname:

* Your Topic:



Please, enter the text shown in the image into the field below
*Verification Code:
Post Topic

Only registered users can write reviews. Please, sign in or sign up

Rob | Verified Buyer

  • Quality
  • Overall
  • Value

CORONA DS-929MG DIGITAL SERVO

Jan 07, 2021

good value

PaulB | Verified Buyer

  • Quality
  • Overall
  • Value

My Go To Servo, 20 odd in use.

Dec 20, 2020

I have been using these and their predecessors for years. Only problem is that the cases crack from the output gear through the hole where the internal lay shaft goes. This allows the gear train to flex and you can have it slipping making the servo unless. I have designed a small 3D printed strengthening clip (on Thingiverse) to solve the problem.

Serju | Verified Buyer

  • Quality
  • Overall
  • Value

Very good

Nov 26, 2020

Corona for life ! great torque for such a small factor servo.
I have dozens, not 1 failed !

Serju | Verified Buyer

  • Quality
  • Overall
  • Value

Very good

Nov 26, 2020

I use Corona servos for years. Great price/quality , diversified offer. I order Corona servos on almost every time !

LikarD | Verified Buyer

  • Quality
  • Overall
  • Value

Good for 450 heli

Jun 01, 2020

Use these on my old 450 heli

Gordon | Verified Buyer

  • Quality
  • Overall
  • Value

Great cyclic servo

May 19, 2020

Good overall servo , except dose not give signal ratings in Hz or like 1520 cu . Even though I upgraded my blade 400 servo's to these digital servo's they were not enough for my tail servo performance . Had I known. I could of upgraded right away knowing the signal strength of the corona 929's , if they would of posted that information .

Marek | Verified Buyer

  • Overall
  • Value
  • Quality

Very good

Apr 28, 2020

Very good

Robin | Verified Buyer

  • Overall
  • Value
  • Quality

very good servos

Apr 12, 2020

:)

Mr T | Verified Buyer

  • Quality
  • Overall
  • Value

Transmission play to large

Mar 20, 2020

Hi!
All most all things seames to be really good with this servo but the play that can be detected in the mounted servo arm is all to big for my liking. This range of floating neutral point makes theise servos close to worthless to me. I wont use them in any high speed aeroplanes or cars and seartainly not for gimbal uses with FPV flight. It would be good for me if you included this transmission play in the spec for all your servos. If you had done this when I bought these servos i would have bougt an other brande of more expencive servos and had been happy about it. Now I am not so happy about it.
Thanks for asking!
Best regards Mr T

Jethro450 | Verified Buyer

  • Value
  • Quality
  • Overall

Perfect for traxxas latrax

Dec 28, 2019

This was a perfect fit for our traxxas latrax, stronger than stock, worked excellent.

Customer files
VCT RC 450 PRO V2 - Mesut AKIN Download [218]
Are these really digital? Download [249]
NOT FULL METAL GEAR Download [228]
Upload your file

Only registered users can upload files.
Please log in or register to start helping your fellow hobbyists today!

Accessories