- Product
Description -
Corona DS329HV Digital Metal Gear Servo 4.5kg / 0.09sec / 32g
Specs:
Model: DS329HV
Operating Voltage: 6.0V / 7.4V
Operating Current: 320mA / 420mA
Operating Speed: 0.10sec.60°/ 0.09sec.60°
Stall Torque: 4kg.cm / 4.5kg.cm
Size: 32.5X17X34.5mm
Weight: 32g
Dead Band: ≤3uSec
Operating Travel: 40°/one side pulse traveling 400us
Potentiometer: 5 slider/Direct Drive
Ball bearing: MR106
Gear: Metal
Connector wire: 300mm
Operating Temperature Range: -20°C+60°C
Spline count: 25 - Product
Specifications -
Additional Information
-
SKU:
014000005
-
Brand:
Corona
-
Weight(g)
57.00
-
Length
50.00
-
Width:
30.00
-
Height:
50.00
-
Speed (Sec/60deg)
0.09
-
Torque(kg)(min. 0.01kg)
4.50
-
Unit Weight (g):
No
-
A(mm):
40.00
-
B(mm)
33.00
-
C(mm)
35.00
-
D(mm):
19.00
-
E(mm):
44.00
-
F(mm)
24.00
-
SKU:
- Community
Discussions -
- Rate&
Review -
Gute Servos die ich offt verwendehmmm... mot very good, not very strong, not very precise, play is ok, wasted money for meI've bought six of these servos. The first four went into a .46 sized sports plane (an ARFMFG Extra 260). I'm running the Spektrum RX and these servos from a 2cell LiPo. The plane is about 2.5 years old now and because it is such a good little performer, it comes out quite often. The servos have been faultless, they are quite smooth and centre well. However the last two servos I bought, overshoot when centring. The do actually centre OK but only after overshooting a couple of times. I've not had any issues with the case breaking.wPrice and excellent quality.
Recommend RecommendOk, Not sure what's going on with this servo, running them at 6.0 volts and they just don't center well. Running them on a PA Addiction XL. One of the few items I have bought from HK that is horrible. None of them center well. I will have to replace them all.Nice and smooth. Real quick. Works great as the roll servo on my gimbal. People complain about the plastic being bad but I can't tell. Works beyond my expectations.I have been using the DS329hv servos in a 7 pound Sig 50th Anniversary Cub converted to electric (Turnigy G60 driving 15/10 Turnigy wood propellor). I am operating them at 5.5 volts through a Turnigy Dlux 70 amp data logging ESC. With the three servo setup (only using one aileron servo attached to the old style torque links) no brown outs, good torque, no broken case parts, fast servo even on 5.5 volts. Very happy with these servos after six months of regular weekly flying. Very little gear train slop as well, and very little digital servo buzz.Servo anti couple reu je s pa quandi seen this go threw a lot of stuff on my friends rc cars. It install on the carDoes NOT work with the Quantum Vandal 4x4.....even though it shows it to be a related item!!!!!! its way to small!!!!! :( - Upload
Videos - Upload
Files
