- Product
Description -
Corona DS339HV Digital Metal Gear Servo 5.1kg / 0.13sec / 32g
Specs:
Model: DS339HV
Operating Voltage: 6.0V / 7.4V
Operating Current: 320mA / 420mA
Operating Speed: 0.14sec.60°/ 0.13sec.60°
Stall Torque: 4.5kg.cm / 5.1kg.cm
Size: 32.5X17X34.5mm
Weight: 32g
Dead Band: ≤3uSec
Operating Travel: 40°/one side pulse traveling 400us
Potentiometer: 5 slider/Direct Drive
Ball bearing: MR106
Gear: Metal
Connector wire: 300mm
Operating Temperature Range: -20°C+60°C
Spline count: 25 - Product
Specifications -
Additional Information
-
SKU:
014000004
-
Brand:
Corona
-
Weight(g)
57.00
-
Length
76.00
-
Width:
32.00
-
Height:
51.00
-
Speed (Sec/60deg)
0.13
-
Torque(kg)(min. 0.01kg)
5.10
-
Unit Weight (g):
No
-
A(mm):
40.00
-
B(mm)
33.00
-
C(mm)
34.00
-
D(mm):
19.00
-
E(mm):
44.00
-
F(mm)
24.00
-
SKU:
- Community
Discussions -
- Rate&
Review -
kleiner als ein std. servo, ansonsten gutes ding.I have some of them already in use. Good, smooth running servo with good centering. Recommended product for all that need midsize due to low space.Purchased and received four of these servos with the intention of using them in an EF1 Pylon plane (similar to the Invictus sold here). Bench tested and found all four to function properly with ESC BEC set to output 7V. Servos seem fast, seem to have good resolution, have plenty of torque to work against opposing forces, seem to center well and don't buzz when at a neutral position and an opposing force is applied.
I've not installed or flown with them yet but will update the review once I have. For the moment these seem to offer good performance at a great price when compared to equivalent servos available elsewhere.Die Servos sind TOP.Leider haben die die Servohebel zu viel Spiel auf der Welle.Ich mute mit Hitec-Hebeln nachbessern um das Spiel zu entfernen.Good electrically but the plastic case is far too brittle. I've now had 5 of these shed their mounting lugs when installing or removing them. A great pity as they are otherwise very good.Very strong servo, however there have excessive play of the arm & the gears.
In addition the plastic that hold the bolts is very soft and broken easely
servo is great fast i use it for diy landing gear and it supports a 450 quad at 2800g with batteries and 2 axis gimbal and go pro.small strong reliable i had 2 hard landings and perfect funtionYes its ok but its smaller than the other std. Servos.... works goodbought 4 of these all work greatSuper, ein MgServo fr den preis 4 Stck im Betrieb spitze - Upload
Videos - Upload
Files
