Total Price


Cart 0 Cart 0 Loading...

H-King Crusader (ARF) 30E 1200mm (47.3") Stick

Generating Links

H-King Crusader (ARF) 30E 1200mm (47.3") Stick


Now save save $0.00 $0.00

Shipped From:
  • USA
  • Global
Already Purchased
ETA: End March 2021 [ ? ]
want FREE shipping? Click here to find out more!

The H-King Crusader 30E is based on the classic stick design. This electric RC plane can be flown by both beginners and experts. It is constructed from lightweight ply and balsa that is painted with a high contrast color scheme. The Crusader will stand out on the ground and in the air at your local hobby club.

This quality built balsa model not only looks the part but also delivers stable flying from low to top speeds. It doubles as an aerobatic RC plane for its capabilities to complete a full range of sport aerobatic maneuvers. The high-wing configuration along with its light but strong frame makes it an excellent choice as a beginner aerobatic trainer for people who want to break into the aerobatic scene.

As an ARF (Almost Ready to Fly), there will be some assembly required. You will also need to install your power system and radio equipment. It is recommended that you run a 2216-980KV motor with a 30A ESC (with BEC) and a 10x5 propeller running on a 2200mAh 3S LiPo battery with your choice of radio and receiver. 9g servos provide ample control and will complete the fit-out.

The H-King Crusader 30E is an eye-catching RC plane that will provide hours of precision flight. Get yours now.

• Broad flight envelope, good for beginner and sports flyers alike
• All balsa and light plywood construction
• Easy to fly and with excellent flying characteristics
• Large battery compartment for easy swapping battery packs
• Strong, yet light aluminum landing gear
• High quality covering film with high contrast color scheme
• Full 4 channel control: Elevator, rudder, throttle, and aileron

Wingspan: 1200mm
Length: 1000mm
Flying weight: 990g

1 x 2830 (2216 Stator Size) 980-1100KV Brushless Outrunner Motor
1 x 30A ESC with BEC
1 x 10x5 Propeller
4 x 9g Servos
1 x 3S 11.1V 2200mAh LiPo Battery
1 x 4~6 channel Radio Transmitter and Receiver

  • IC/2:Elec Electric
  • Wingspan(mm) 1200.00
  • Length(mm) 1000.00
  • H-King Crusader 30E 1200mm Stick - HobbyKing Super Daily
  • H-King Crusader Build Review, testing and flight
Upload video

Only registered users can upload video. Please, log in or register

Sort by
Most Recent Topics
* Nickname:

* Your Reply:

Please, enter the text shown in the image into the field below
*Verification Code:
Post a new Topic
* Nickname:

* Your Topic:

Please, enter the text shown in the image into the field below
*Verification Code:
Post Topic

Only registered users can write reviews. Please, sign in or sign up

Johnny | Verified Buyer

  • Quality
  • Overall
  • Value

Great airplane flying with it is so much fun

Feb 08, 2021

I’m hoping to get a USA navy j3 cub in March

BeWo | Verified Buyer

  • Quality
  • Overall
  • Value

Fine plane

Jan 23, 2021

Good quality, good package.
I'm very satisfied. Really nice model.

Crusader 30E | Verified Buyer

  • Quality
  • Overall
  • Value

Worth the wait

Jan 18, 2021

‘had to wait for it to be back in stock; worth the wait.
‘wish it came with 2 1/2” main wheels.
Really like this model so far. Due to weather conditions, haven’t been able to fly it yet.
‘waiting for it to come back in stock; I have a .32 size glow engine I’d like to try on it.

Bill | Verified Buyer

  • Quality
  • Overall
  • Value

So Close but Disappointing

Nov 30, 2020

Was excited to receive this stick model in good condition. Assembly was pretty easy with 2 exceptions. First, the one of the tabs that engage the vertical fin to the fuselage is misaligned by about 10 mm. It interferes with the rear screw holding the horizontal stabilizer in place. Second, the enclosed hardware is of the lowest quality ever seen. Add better quality hardware and raise the price a dollar or two if you must.
A bigger issue I found was that the t-nuts securing the landing gear were installed backwards. That is with the "head" facing outward; not taking advantage of 2 layers of lite ply to support the gear but relying only on the glue holding them in place. This caused the gear to rip out with screws and t-nuts attached on a fairly normal landing.
Crusader is close to great but the lack of attention to detail makes it a near miss IMO.

Magnus | Verified Buyer

  • Quality
  • Overall
  • Value

I love this Plane

Nov 14, 2020

5 * because it´s very light , Wood and fly fantastic .
i´ve bulild in an 35 42 Motor 1250 kv with 4s 2350 mah
on a 9 x 6 Propeller .

Jen | Verified Buyer

  • Quality
  • Overall
  • Value


Nov 14, 2020

Control horns not good ,breaks real easy.

Keith | Verified Buyer

  • Quality
  • Overall
  • Value

UPDATE and Comparison to V2

Sep 08, 2020

I have been flying my Crusader (Stick) now for a good long time (1year+) and had to make a few crash repairs after some minor arguments with the ground.
The tail is now a little crooked. The undercart is a little bent and the covering has a few patches here and there.
This model continues to be my favourite with the necessary strengthening around the undercarriage area it soldiers on without complaint.
Several people have bought the V2 Ugly Stick (foam version) to our flying field and they have all agreed that the balsa version seems to fly better.
This model with a 3s 2200 and a 3536 1450KV motor is still epic.
Yes, I have puffed a couple of batteries with this model and it isn't as 'floaty' as the V2 version but I still love it!
It's a speed monster when you want it to be but with the big draggy wing it slows down really beautifully.

enrique | Verified Buyer

  • Quality
  • Overall
  • Value

avio de tots els diumentes

Aug 16, 2020

avió molt lleuger. vol tranquil pero si l'aprestes pot fer acro senzilla. motor 2835 1000kw. helix 10x5. slow fly. variador 30 ampers. bateries 2200mh. no cal tocar res. centre gravetat perfecte. la cua es molt efectiva. molt recomanable per disfrutar sense problemes.

Eric | Verified Buyer

  • Quality
  • Overall
  • Value

Nice to fly after issues sorted

Aug 03, 2020

Several of us at LVMAC have found the Crusader nice once it is sorted out. The hinges are fiddly, the landing gear mounting is flimsy, the firewall is weak and had to be reinforced, the mounting for the motor was difficult because the lower screw holes clashed with the battery tray and had to be corrected, the fuselage is skewed so that the wing and horizontal stab is not square, the wing mounting screws are fiddly to install, because the wing position is not aligned with the holes, the wheels are too small for grassy fields - I used slightly larger diameter wheels successfully, and the tail wheel mounting is not well thought out

Steve | Verified Buyer

  • Quality
  • Overall
  • Value

Love this plane

Jul 15, 2020

Ok I am in the market to replace, as I crashed mine, but I was looping rolling stall turning, I’m just not that good a pilot and got carried away. Don’t use the motor recommended though you need 3535 1200kv minimum, the recommended motor struggles to take off, but there is nothing wrong with the plane. Don’t think, just buy one, you won’t regret it

  1. 1
  2. 2
  3. 3
  4. 4
Customer files
Crusader Instruction Manual.pdf Download [1]
Nitro engine, ASP 21 Download [4]
Nitro engine ASP 21 Download [3]
Nitro engine ASP 21 Download [3]
Upload your file

Only registered users can upload files.
Please log in or register to start helping your fellow hobbyists today!