New Items Forum
Register

Total Price

$0.00

Cart 0 Cart 0 Loading...

Dassault Alpha Fighter 90mm Ducted Fan EPO Plug-n-Fly

Dassault Alpha Fighter 90mm Ducted Fan EPO Plug-n-Fly

Discontinued Product

Please continue searching for a similar product.
SKU:
Alpha90-P
WANT FREE SHIPPING? Click here to find out more!

Highly scaled, large size aerobatic fighter jet with a big 90mm EDF system.
The Alpha EDF jet comes 97% pre-built and includes a powerful 80A brushless 90mm EDF system and steerable nose wheel with Retractable landing gears.
This well detailed and strikingly painted jet uses a 90mm ducted fan unit to provide fast throttle response and a high top speed.
This model has many special features, such as operational landing gears, flaps for great slow-speed handling. There are 8 servos installed, All servos are of very high quality, providing smooth movement of all control surfaces. The ducted fan is dynamically balanced and the canopy is easily removed to change batteries between flights.
This is an exciting looking big size EDF model that will impress everyone at your next club meeting!

The Alpha comes 95% completed and will take around 1hr to attach wings and fuselage, insert power system and connect electronics.

Specification:
Wingspan: 1020mm
Length: 1380mm
Flying Weight: 2500g 
Channel: 6ch
Motor: 1510kv Brushless Inrunner
ESC: 80A
Servo: 8 x 9g, 3 x 17g 
EDF: 90mm 
 
Required:
Your own Tx & Rx
Battery 3700mah 22.2V 6S 20C

  • SKU Alpha90-P
  • Brand -
  • Capacity (mAh) -
  • Shipping Weight 3711.0000
  • Packaging Length 975.00
  • Packaging Width 255.00
  • Packaging Height 450.00
  • Dassault Alpha
Upload video

Only registered users can upload video. Please, log in or register

Only registered users can write reviews. Please, sign in or sign up

Well I maidened my Alpha Jet on Saturday and it flew beautifully right off the bench! Retracts worked well, just a couple clicks of aileron and elevator trim was needed.
However, the ESC crapped-out during the maiden flight! ...DEAD-STICK, got it landed safely, but this ESC is shot!
Contacted HK this morning, and they want me to send them a video of the dead ESC .....go figure? They want a video of a DEAD ESC just sitting on mu bench?
What idiots!

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

Well I maidened my Alpha Jet on Saturday and it flew beautifully right off the bench! Retracts worked well, just a couple clicks of aileron and elevator trim was needed.
However, the ESC crapped-out during the maiden flight! ...DEAD-STICK, got it landed safely, but this ESC is shot!
Contacted HK this morning, and they want me to send them a video of the dead ESC .....go figure? They want a video of a DEAD ESC just sitting on mu bench?
What idiots!

Came nicely packed without damage. Very easy build..took about 3-4 hours. Landing gear requires abit of adjusting but seems to work ok...not sure how long it will hold up tho.
On the maiden flight the motor packed it in at about 3 mins into the flight. I never used the stock esc, I switched it to the red brick 125 opto and run a 2s 1700 reciever pack off a BEC. The plane took off very nicely and had ok power. No trimming was needed at all and the recommended CG points are dead on the money. The Alpha seems to have no bad habits and was very predictable to fly with full throws and 30pcnt expo. It could probably use just a tad more elevator so I'm bumping it up to 115pcnt. The plane has a very good glide rate...which I had to find out the hard way...but I was able to get it back from a long ways out and put it nicely on its belly on the grass. No damage to the plane at all! Over all I'd say a good buy but don't use the stock esc or motor. The same motor I've seen offered on other models but only rated to 5s. In the description here the plane is recommended to use a 6S batt...I think it's only a 5S motor as the screws were melted into the housing telling me the motor was way too hot...and it was minus 2 the day I flew it.

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

Came nicely packed without damage. Very easy build..took about 3-4 hours. Landing gear requires abit of adjusting but seems to work ok...not sure how long it will hold up tho.
On the maiden flight the motor packed it in at about 3 mins into the flight. I never used the stock esc, I switched it to the red brick 125 opto and run a 2s 1700 reciever pack off a BEC. The plane took off very nicely and had ok power. No trimming was needed at all and the recommended CG points are dead on the money. The Alpha seems to have no bad habits and was very predictable to fly with full throws and 30pcnt expo. It could probably use just a tad more elevator so I'm bumping it up to 115pcnt. The plane has a very good glide rate...which I had to find out the hard way...but I was able to get it back from a long ways out and put it nicely on its belly on the grass. No damage to the plane at all! Over all I'd say a good buy but don't use the stock esc or motor. The same motor I've seen offered on other models but only rated to 5s. In the description here the plane is recommended to use a 6S batt...I think it's only a 5S motor as the screws were melted into the housing telling me the motor was way too hot...and it was minus 2 the day I flew it.

Hello, i just received today this kit from HK, please be advised that my kit came with a 70Amp ESC and NOT an 80Amp as they advertise. Im trying to correct this and opened a support ticket with them, let us see how will this ends.



Will keep you posted on more issues found.



Regards,



Joo

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

Hello, i just received today this kit from HK, please be advised that my kit came with a 70Amp ESC and NOT an 80Amp as they advertise. Im trying to correct this and opened a support ticket with them, let us see how will this ends.



Will keep you posted on more issues found.



Regards,



Joo

Would I buy this jet again? Not a chance. Would I recommend to a friend? Not a chance. Everything in this great big jet is glue. There are no wing screws??? The Wing is 100pcnt glued down to the fuselage. Ok...so I've got real strong glue and it's probably on there real good, but how about replacements? Then the kicker... This great big edf has not even been on the field or in the air yet, and all 3 of the gear servos fail.
Now I'm making this into a belly lander. Definitely not what I had in mind when I bought this big jet.

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

Would I buy this jet again? Not a chance. Would I recommend to a friend? Not a chance. Everything in this great big jet is glue. There are no wing screws??? The Wing is 100pcnt glued down to the fuselage. Ok...so I've got real strong glue and it's probably on there real good, but how about replacements? Then the kicker... This great big edf has not even been on the field or in the air yet, and all 3 of the gear servos fail.
Now I'm making this into a belly lander. Definitely not what I had in mind when I bought this big jet.

Nice quality EPO and has even flaps !!!

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

Nice quality EPO and has even flaps !!!

Im not sure how to rate this Jet as I can not fly mine due to the faulty ESC that came with the jet. Sent it back to HK in May and now it is the end of August and Im still waiting for a replacement ESC. If I do get a replacement, I will rate the Jet however right now, I'm not a very happy customer.

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

Im not sure how to rate this Jet as I can not fly mine due to the faulty ESC that came with the jet. Sent it back to HK in May and now it is the end of August and Im still waiting for a replacement ESC. If I do get a replacement, I will rate the Jet however right now, I'm not a very happy customer.

Motor packed up on maiden flight . Big puff of smoke on take off and into two pieces. Tested ESC with diff motor and works fine ... Not happy.........................

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

Motor packed up on maiden flight . Big puff of smoke on take off and into two pieces. Tested ESC with diff motor and works fine ... Not happy.........................

this kit gets the 5 stars, mine came from HK as the U.S. warehouse did not yet have it. Very well packed and looks great. not yet put together but it's baby brother flies good. Hope this one indicates the correct CG

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

this kit gets the 5 stars, mine came from HK as the U.S. warehouse did not yet have it. Very well packed and looks great. not yet put together but it's baby brother flies good. Hope this one indicates the correct CG

Customer files
take-off Download [316]
in flight pic Download [212]
In flight pic Download [146]
On ground(Sujit Hait) Download [734]
IT'S ESC Download [678]
ESC Burn on runway Download [827]
Why ESC burn? Download [691]
Upload your file

Only registered users can upload files.
Please log in or register to start helping your fellow hobbyists today!