Following on from the popular Diatone Blade 250 racer is the Diatone Micro 200. It offers all you have come to know and respect of its bigger brother but in a fun micro size. Made from super durable carbon fiber it is packed with excellent features at a fantastic price.
The frame has been designed to be both clever and aesthetic, it has 30mm mounting holes top and bottom so that you can mount all the standard hardware. There is plenty of room both inside and on top for equipment that is readily available. The cut-outs have been strategically placed to accomodate the FPV components including the camera and antenna stalk. The arms are adjustable to allow you to choose which size propellers you wish to use.
The frame comes with an integrated power distribution board with 5V stepdown, nylon posts, nylon nuts and bolts, fiber washers and fixing screws.
• Ultra durable carbon fiber construction
• Made from 3K carbon fiber 2mm thick
• Standard 30mm bolt holes for flight controller etc
• 20mm clearance between top and bottom plates
• Intergrated power distibution board (with 5V stepdown)
• Suits motors with 9~12mm mounting hole centers
• Aluminum standoff's
• Lightweight (27.5g frame only)
Material: Carbon fiber
Frame Width: 165~175mm (motor centers)
Frame Length: 125~145mm (motor centers)
Frame Height: 26mm
Weight: 27.5g (frame only)
Motor Mounting Holes: 9~12mm
4 x 1306 2300~3100Kv brushless motors
4 x 3~6ins propellers
4 x 6~12A speed controllers
1 x Flight controller
1 x 800~1200mAh 2~3S lipoly battery
4ch radio system
Frame from Hobbyking FPV 250 spec kit was destroyed early on. Took the Multistar 1704-1900's and Afro 12amp escs and put into this. This is my favorite drone to fly. It will fly seemingly forever on a 2s 1000mAh lipo. Caution: do not use 5X4X3 props with this setup- it will be unstable. With 5X3X2 carbon fiber props it is amazing. It gets a little hard to handle for me with 3s, but really screams. And it comes in at well under the 0.55 pound (without battery) USA weight limit for unregistered drones, so you can fly to your heart's content without worrying about the FAA coming to your house, as long as you don't attack commercial/ private planes, of course. Have to add your own led's if you want lights, used salvaged smd's from broken Hobbyking Ghosts for this. Check your current with a VOM- the Ghost leds work well from 15 to 25mA, and I tested at 40mA for several minutes without a failure.Lite, strong, and cheap. Paired with DYS 1804 2300, ZTW 18a, Naze32, Bluetooth, HQ5x3, NT 850 3s 25-40c auw 223g Hovers at 40pcnt and screams as eats real estate. Picture in file tab.Simply beautiful. Top quality glossy carbon fiber, top quality hardware to assemble, which is very simple and easy by the way. All hardware attached, the frame is very strong and do not bending at all. I am very impressed with its quality and so happy with my Christmas gift. Thanks HK and Diatone ! Excellent product ! Next - Diatone Blade 250...This frame is strong and very light, about 30g fully built. I put my electrics from my 230 mini quad and saved 120g in weight , it was a bit of a squeeze . Goes like crazy with 1300 3s and baby beasts running 5x4.5 bullnose props. AUW with fpv gear is 360g.
Blade 200 free height download now [105kb] Blade 200 dimensions download now [166kb] Blade 200 weight download now [76kb] Blade 200 PCB download now [71kb] 1804 2300 Rocket download now [2452kb]