New Items Forum
Register

Total Price

$0.00

Cart 0 Cart 0 Loading...

Diatone Tyrant 150 Frame Kit - Orange

Diatone Tyrant 150 Frame Kit - Orange

Shipped From:
  • USA
  • Global
QTY:
$39.99
Status:
In Stock
Weight:
167 g
SKU:
366000168-0
WANT FREE SHIPPING? Click here to find out more!

Want to rule the quad racing world?  Then let Diatone Innovations help you get there with the Tyrant!  A new approach to racing quadcopter design that delivers superb performance across three racing classes.

Available in 150, 180 and 215 size frame kits the Tyrants are all manufactured from super strong carbon fiber composite material featuring a 4mm thick, machined carbon-fiber, one-piece main frame that is almost indestructible. All kits come with an integrated PDB (with Mini V2 5V 2A BEC) that fits in the super tough frame, reducing overall weight, improving robustness and making maintenance much easier.

All you need to do is add your chosen flight controller, ESCs, motors, propellers, battery and receiver to provide all the power you want. You will also need to add your chosen video gear to make it into an excellent FPV racer.

The Diatone Tyrant 150 frame kit provides an excellent platform for your FPV racer.

 

Full list of spares can be found Here 

Specs:
Wheelbase:150mm
Material: Carbon Fiber
Upper board: 1.5mm
Lower board: 4mm
Height: 52mm
Weight:124g
Motor mount bolt holes: 9/12mm

Recommend: (not included in kit)
Propeller: 3 inch
Motor: 1306-3100KV
ESC: 15-20A
Flight controller: Diatone Naze32 Rev6(B)6DF
Camera: DIATONE 600 TVL Mini Camera
Battery: 3S (11.1V)  1000~1300mAh LiPoly Battery

Includes:
Tyrant 150 Carbon Fiber Frame Kit (Includes integrated PDB)
1 x 1306 Motor Protection/Landing Gear
1 x Cable set
1 x Minicamera mount

  • SKU 366000168-0
  • Brand Diatone
  • Capacity (mAh) -
  • Shipping Weight(g) 167.00
  • Length 240.00
  • Width 25.00
  • Height 240.00
  • Daitone Tyrant Race Quad
Upload video

Only registered users can upload video. Please, log in or register

Only registered users can write reviews. Please, sign in or sign up

It has the coolest PDB ive seen, it has LEDs, buzzer, VTX wiring 5.2v 2a bec however if you want to use a 4in1 speedie to cut down the weight, you will need to ditch the PDB. Ive fit a RunCam Split however because of adding another board ive had to use 20mm standoffs as the 15mm ones supplied make it just too tight to fit anything you can buy i think a pack of 20 just look through the Diatone products. Im using 1407\1850kv spracing f3 4in1 blheli_s 20a Graphine 850mah 4s It will carry the Batteries either on top or underneath .

playlist_add_check Overall:
trending_up Value:
verified_user Quality:

It has the coolest PDB ive seen, it has LEDs, buzzer, VTX wiring 5.2v 2a bec however if you want to use a 4in1 speedie to cut down the weight, you will need to ditch the PDB. Ive fit a RunCam Split however because of adding another board ive had to use 20mm standoffs as the 15mm ones supplied make it just too tight to fit anything you can buy i think a pack of 20 just look through the Diatone products. Im using 1407\1850kv spracing f3 4in1 blheli_s 20a Graphine 850mah 4s It will carry the Batteries either on top or underneath .

It's a pain in the .... to build becouse its so tiny lol,

Verry strong frame onley brakes when run over by a truck.

all cables are included for pdb (double conector and single conectors) good 5v suplay

When finished its a exelent flyer,

mine has mini apm(micro hk controller) and supper stable! installed the quanum elite 25 mini fpv cam (modded, seperate the transmitter from the cam and different anttenna,clover damaged to fast)

Best mini so far superb quality

3030 props are underpowerd need minimum 3040's

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

It's a pain in the .... to build becouse its so tiny lol,

Verry strong frame onley brakes when run over by a truck.

all cables are included for pdb (double conector and single conectors) good 5v suplay

When finished its a exelent flyer,

mine has mini apm(micro hk controller) and supper stable! installed the quanum elite 25 mini fpv cam (modded, seperate the transmitter from the cam and different anttenna,clover damaged to fast)

Best mini so far superb quality

3030 props are underpowerd need minimum 3040's

Absolutely the coolest 150mm frame out there, 4mm arm thickness is crazy strong for such a small quadcopter, and the PDB is top notch perfect with all the built in options a person could want

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

Absolutely the coolest 150mm frame out there, 4mm arm thickness is crazy strong for such a small quadcopter, and the PDB is top notch perfect with all the built in options a person could want

Upload your file

Only registered users can upload files.
Please log in or register to start helping your fellow hobbyists today!

Combine Essential Items and Save