Naza-H has inherited the All-in-One design of the Naza series of autopilot systems. With the innovative All-in-One design, it contains inner damping, controllers, a 3-axis gyroscope, a 3-axis accelerometer and a barometer in its light and small main controller. It simplifies installation and saves space and weight and its firmware can be upgraded over the internet.

The high-performance FBL (flybarless) system, with a linear and smooth control feeling, is specially designed for model enthusiasts, specifically for hard 3D flight. The system fully meets the requirements of the novice and professional pilot and more importantly you can also set different flight styles anytime you want. The system has plenty of advanced functions, such as the pirouette compensation and auto trim which allows you to feel the ease of stabilization as well as experience the hard 3D flight.

Naza-H is suitable for a variety of electric helicopter platforms from small to large, such as 450, 500, 600 and 700 size, etc. At the same time Naza-H supports different swashplate types. In addition to the most commonly used 6 types of swashplate, users can also use virtual swashplate rotation to fine tune the helicopter characteristics.

Naza-H has inherited the high stability technology of DJI autopilot systems. It combines a GPS (optional), a 6-DoF inertial measurement unit, a magnetic field meter and a barometric altimeter with the most robust algorithms in robot control theory. With the advanced GPS/INS sensor fusion algorithm technology and the highly robust H-infinity control as the foundation, it makes the whole system more accurate even in high vibration and high mobility environments. All these ensure the helicopter always maintains flight stability, mobility and precision, all of which makes flying easier.

Naza-H offers three control modes: GPS Attitude Mode (with optional GPS module), Attitude Mode and Manual Mode. Customers can switch between the three modes using the transmitter.

The independent BEC module, with a wide voltage input (11V~52V) and a variable voltage output (5.8V, 7.4V) can power not only the main controller, but also the servos and receiver. Users can change the output voltage according to their servos, and stable output current is provided without an extra battery pack. The use of the BEC makes the aircraft lighter and the voltage more stable, plus less batteries to worry about.

Features: 
• All-In-One design
• Built-in Tail Gyro/Flybarless supported
• Multiple electric helicopter platform support
• Real-time voltage monitoring
• Advanced Attitude and Control Algorithm
• Multiple Flight Control Modes/Intelligent Switching
• D-BUS Supported
• Independent LED Module
• Intelligent Fail-Safe Mode
• Independent BEC Module
• Simple Assistant Software and Firmware Upgrade

Specs:
Dimensions;
MC: 45.5×31.5×18.5mm
GPS: 46(diameter)x9mm
LED: 25×25×7mm
BEC: 39×27.5×12.7mm

Weight;
MC: 25g
GPS: 21.3g
LED: 13.4g
BEC: 37g

Operating Temperature;
MC: -10°C ~ 50°C
GPS: -10°C ~ 50°C
LED: -10°C ~ 50°C
BEC: -10°C ~ 50°C

Input Voltage;
MC: 4.8~8.4V
GPS: 4.8~8.4V
LED: 4.8~8.4V
BEC: 11~52V

Consumption;
MC: 1.5W(300mA@5V)
GPS: 0.3W(60mA@5V)
LED: 0.3W(60mA@5V)
BEC: 7.4V: 0.25W(10mA@25V)
5.8V: 0.375W(15mA@25V)

Built-In Functions;
Tail Gyro
Flybarless Supported
Auto Hover or Level Fail Safe
S-Bus Supported
Low-voltage Alarm (RX voltage and Motor voltage if using the DJI BEC)

Supported Swashplate Types;
H1, 120°, 140°, Four Servo 90°

Supported Servo Output;
Analog 50HZ,Digital 145HZ (1520us center point)

Tail Servo Output;
Analog 50Hz(1520us center point), Digital 333Hz/560Hz(760us center point), Digital 125Hz/165Hz/270Hz/333Hz(1520us center point)

Included:
Naza-H Flight Controller
LED Module
PMU Module
GPS/Compass Module
LED Module
6 X 3M VHB Foam Tape
8 X Servo Cable
1 X USB Cable