DJI Phantom 2 Quad Copter and ZENMUSE H3-3D 3-Axis Gimbal Combo (Ready To Fly)

This Combo package with the famed DJI Phantom 2 Quad copter and 3 Axis Zenmuse H3-3D gimbal is a perfect turnkey solution for aerial cinematography.

The DJI Phantom 2 features the same compact, highly integrated design as the Phantom one, but comes with FPV flying and aerial cinematography support right out of the box. It is unbelievably easy to fly. Combined with smooth, stabilized footage from the included H3-3D gimbal, aerial cinematography has never been easier. It’s light, rugged and perfect for travel.

The Vision 2 has an intelligent, high capacity, high performance 5200mAh LiPoly battery and offers up to 25 minutes of flight time. Built in intelligence provides battery capacity data, over charge/discharge protection, as well as maintenance reminders making the battery extremely safe and reliable.

DJI Zenmuse series of camera gimbals are known for their professional performance and results. The Zenmuse series is plug & play easy with no additional hardware or software tuning required. The .08deg accuracy makes this a professional level option for your DJI Phantom, and ready to kick start your aerial cinematography creativity.

The included 2.4GHz radio system is simple, practical and equipped with both sticks that spring center when released, for automatic hovering (throttle/altitude as well). The integrated GPS auto-pilot system offers position holding, altitude lock and stable hovering. This allows attention to be focused on aerial video shooting and adds a layer of safety. Speaking of safety, if the Phantom 2 and its controller disconnects during flight, the system’s failsafe protection will come to the rescue and the Phantom 2 will return to home and land automatically.

The proven quality and performance of the DJI Phantom make this one of the best-selling and most used multi-rotors of all time, and the Phantom 2 is even better.

*Note: You can also program a One Key Go Home function through the Assistant software.

Features:
• Ready to Fly, Multifunctional Quad-rotor System
• Included  Zenmuse H3-3D Gimbal
• Precision Flight and Stable Hovering
• 25min Flight Time & Intelligent Battery
• Auto Return-to-Home & Landing
• Advanced Power Management
• Intelligent Orientation Control (IOC)
• Easy Battery Replacement
• Self-tightening Propeller
• Video Downlink Support
• CAN-Bus Expansion Module
• Online Upgrade ability

Specs:
Weight (W Battery):1000g
Hover Accuracy: Vertical: ±0.8m Horizontal: ±2.5m
Max Yaw Angular Velocity: 200°/s
Max Tilt Angle: 35°
Max Ascent / Descent Speed: 6m/s
Max Flight Speed: 15m/s (Not Recommended)
Diagonal Length: 350mm
Power Consumption: 5.6W
Flight Time: 25mins
Take-Off Weight: <1000g
Supported Battery: DJI Intelligent Battery 3S 11.1V LiPoly 5200mah
Operating Frequency: 2.4GHz ISM
Range: 1000m

Gimbal Specs:
Axis control: 3-Axis
motors: Brushless
Construction: Aluminum alloy body
Camera support: GoPro3 and GoPro3+ supported
Control System: Zenmuse technology
Operating Temperature: -10°C ~ 50°C
Gimbal Weight: 168g (camera excluded)
Gimbal Dimensions (With Damping Unit): 97mm X 95mm X 73mm
GCU Dimensions: 42 mm X 32 mm X 9.3 mm 

Requires:
4 x AA Batteries
GoPro 3 Camera 

Regulatory Approvals: FCC (USA) CE (EU) RoHS (EU)