Introducing our Doctor Mad Thrust High performance EDF motor series. Our Doctor has been busily working away behind the scenes to come up with this MAD series of EDF motors.......Power? - Not lacking with these!
This is 1600kv 6s version to suit 90mm EDF units, with a whopping 2400watt power output this 36mm inrunner is not to be sniffed at!
The Dr Mad Thrust range of EDF inrunners have been built with only one thing in mind - maximum EDF performance! They feature high temperature stator windings, high quality bearings, are precision balanced for smooth running and are of a 4 pole design.
Over-engineered to handle the stress and strain of high performance EDF units and high 'C' rated packs. The Doctor has been hard at work to bring you a series of bullet proof, extreme performance EDF motors that are built to last.
Get a Doctor Mad Thrust power house for your EDF!
Max current: 100A
Max Power: 2400 watts
Suggested Rpm Operating Range.
High Blade Count: 32000rpm
Low Blade Count: 37000rpm
Front Mounting Hole Distance: 25mm
Shaft Diameter: 5mm
Shaft Length: 13mm
Front mount Thread Size: M3
Plug type: Bullet-Connector 4mm
Max Currents (A)
Length B (mm):
Can Length D(mm)
Unit Weight (g):
Total Length E(mm)
Bin von dem Motor begeistert.
Super Leistung und Wirkungsgrad, wird kaum warm.
Dreht einen 12-Blatt Rotor, den Dr Mad Thrust 90mm 12 blade fan.
Der Sound ist toll, leises Rauschen, fast schon zu leise.
Erst bei Vollgas hört man was.Great motor. I've got mine in the Taft fan in my HK Cobra (you'll need a 100A ESC) and it puts out 2200W.Mind blowing performance for your $$$
I bought 2 of these for my 6S cat and added cooling jackets. Performance is stunning . This is the 2nd race boat that I have fitted Dr Mad Thrust and they perform at the pointy end always. Thanks H/Ki got this for a 2mtr glider running it on 3s 2600mah 60c discharge battery a 100a delux esc and a 14x8 folding prop and only pulling 44amps loads of power and stays nice and cool happy daysAs an update to my previous review above. I installed the exact motor above that wasn't up to 8s and an EVO fan in a Taft 11 blade fan and ran it on 6s and it did amazing. LOTS of power and smooth running. Motor is staying cool and was a pretty easy fit. (just a little trimming on the shroud for it to fit)Sehr zufrieden.
Funktioniert sehr gut mit original FlyFly-EDF @ 6S ca. 65A.
Hat auch kein Problem mit dem DPS Series 90mm 12 Blade EDF-Rotor bei 6S und ca. 85A.
Works very well with original FlyFly-EDF @ 6S approximately 65A.
Also has no problem with the DPS Series 90mm EDF-12 blade rotor at 6S and about 85A.I put this in a carbon fibre jet see here http://translate.google.co.uk/translate?hl=en&sl=ru&u=http://ascomsk.narod.ru/fx-27.htm&prev=/searchpcnt3Fqpcnt3Dascpcnt2Bfx27pcnt26rlspcnt3Dcom.microsoft:en-GB:MIE-Address
I ran it on ASPEC 2200mah 6s battery on a 7 x 7 prop and it screams through the air with that speed of sound and is as fast as my stratair viper https://www.youtube.com/watch?v=WD2yT-aEzMYits a Dr mad thrust good thrust with 6s battSorry to say that in my case these motors do not live up to their expectation. Totally different kV between 2 of the same motors (25pcnt). One pulling 105 amp (but choking the ESC) producing a lousy 1.45 kg thrust. The other using 122 amps (getting hot) and producing a lousy 2 kg of thrust with 90mm CSF. Had to cut open my brand new plane to get these out and replace them for 2x HetRC producing 2x 3.5 kg thrust. Still debating with HK on waranty.I bought one of these and installed it in a Changesun 12 blade 90mm fan.
I used a red brick 125 amp esc and 6s1p zippy compact 35c 4500 battery pack.
This motor is awesome, the fan runs so smooth and i didnt have to balance anything.
I use this in the FLYFLY hobby topgun L-39 also from HKing.
This model took off in 50 feet and hand launches as well so easily it flies out your hand.
I will deff be purchasing more of these motors in future, on 6s and a 12 blader they a great combo for 2500 watts.