A genuine 3D capable Micro? You better believe it! The Durafly® ™ Slick 360 V2 has a spec sheet that is hard to beat, 3s power, real servos and a brushless motor put it head and shoulders above the rest!
The lightweight construction of this model, coupled with large control surfaces make it a brilliant 3D micro. Many models of this size are often limited by linear servos or cheap components, but not the slick! featuring pre-installed, fully proportional HK-5320 Digital servos, a Turnigy ESC and an NTM 2400kv brushless motor The build quality is just fantastic. Fully hinged ailerons are another example of why the slick stands out from the crowd. This is a fast model to put together, the motor and ESC are pre-installed, leaving you to glue on the wing and cowl then go and fly!
Performance is of course what 3D models are all about and this Slick is no slouch! Power is delivered courtesy of the powerful NTM Brushless motor running on 3s, for reliability a Hobbyking ESC is pre-fitted and the servo/ESC connectors are all compatible with the 4 Channel Orange Micro RX (R415). This model might be cheap to put in the air, but make no mistake, this is one seriously capable 3D Micro, just make sure you take a handful of Lipoly batteries with you when you go and fly, hovering this Slick 360 round the basketball court gets addictive!
Flying Weight: 80g
ESC: 6A w/BEC
Servo: HK-5320 Digital 1.7g x 4
Motor: NTM 13-12 2400kv Brushless Outrunner
Your Own 4 Channel TX/RX (compatible RX with 1.25mm Molex 3 Pin Connectors)
180mAh 3s Lipoly Battery
Spare parts available HERE!
Great little plane, unlimited vertical. The servos are a little underpowered. I can't put the elevator on high trow because the servo does not have enough power. I will will be ordering an ultra micro servo with a little more torque.I have flown this plane about 10 times and it is very fun and has lots of power. Mine has an issue and I have emailed Hobby King with no luck so far. The plane binds but and all works but the throttle. What is frustrating is the issue is intermittent. I have to plug and unplug the battery up to 10 times to get it to work and at times even that does not work. I have the micro molex Orange RX from HK also. Other than that I love this little plane.. HK please help me fix my issue!Just had my maiden flight with this thing. I was real nervous, as it's my first small plane, but it couldn't have gone better! Didn't need any trim, handled the occasional, light, wind gust just fine. I had my rates and expos set to tone it down quite a bit, and it was easy to control, wasn't brave enough for full rates, maybe next time. It would have been nice if hobbyking would have the receiver this plane uses in the US warehouse, then I could have flown this a few weeks ago.Great little plane, I did maiden it a few days ago. It has plenty of power and can do verticals. Very good roll rate but the rolls aren't very axial. Still, I think I have my CG a bit off, because rolls vary from flight to flight.
On 100pcnt rates this is very very snappy. Didn't crash mine so far, I hand launch and belly land in tall grass, but, spare parts can be had here in NL warehouse which is a plus.
Conclusion: VERY good micro for the money. Pair it with a OrangeRX R415 or even better with a FrSky VD5M.Bonjour , je viens de recevoir le mien .
Emballage nickel , montage rapide faire .
Par contre l'avion est trs trs sensible au vent et aux courants d'air chaud :(
Je ne classerai pas cet avion dans la catgorie 3d car il n'est pas manoeuvrable suffisamment rapidement pour tre dans cette catgorie , le moteur est puissant , juste ce qu'il faut .
Un peu du en fait de cet avion aux premires impressions chaud . je m'attendais plus maniable mais ce n'est peut-tre pas possible dans cette gamme .... il ne fait que 80 grammes .This thing is Aplus. I have both the v1 (blue 2s) and this v2 version and this is by far my favorite. I love the extra power with the 3s as it really opens up the planes capabilities. The only thing I dislike about the plane, is the servo pushrods. They are very flexible and don't really allow for full deflection of the tail end surfaces. Just replace those with some cheapo carbon fiber rods and you are good to go. I already ordered this motor/esc setup to transfer into my v1. On the 3s 25-40c 180mah nano techs, I get around 5 minutes of flight time and the packs come down cool to the touch. My sbach will be sitting on the shelf for a while :pVery nice, little aircraft! Flies well and easy to control.
Lots of fun !
In case of damage, replacement parts are available!HI bought one of theses...Didn't do it's maiden yet.
Because i was so excited i cut alll the molex a changed the to normel ones.Took a lot of time. Be cautious with this product it's very fragile.
When i 'll do it's maiden i will keep updates.Schnes und gutmtiges, kleines Kunstfluzeug. Sehr langsames fliegen ohne hoovern ist mglich. Aber auch dank der 3S, ESC, Motorkobi auch recht flott. liegt sehr gut auf dem Rcken. Chilliges Teil. Kann man mit 'ner Eflite UMX SBach nicht vergleichen. Zu unterschiedlich sind die beiden geschnitten. Ich musste weil die Teile zu eng in der Verpackung gequetscht waren Tragflche und Hhenruder mit Wrme behandeln und in Form biegen. Ausserdem an der haube etwas schleifen damit sie passt. Aber das strt angesichts des geringen Preises nicht. Guter Spassflieger.Absolut geil das Ding! Ist einfach super mit dem Slick zu fliegen, geht endlos senkrecht und eig. Durch alle 3d figuren, nur beim torquen und im harrier etwas nervs. Flugzeiten mit 3s 180 mah 4 minuten. Auerdem ist das Teil sehr stabil und steckt auch ziemlich harte Abstrze in Gras gut weg, und wenn doch mal,was kaputtt geht ist es einfach zu reparieren. Ein absolutes Spassmobil, kann nur weiterempfehlen, werde mir vielleicht noch einen 2. Slick zulegen!