The perfect combination for your 250 multi-rotor project from this quality manufacturer of multi-rotor components. In this combo set you receive 4 x DYS BE1806 2300KV motors, 4 x DYS 16amp BLheli Opto speed controllers, the prop drivers and mounting bolts.
DYS BE1806 2300KV Motor Specs:
Voltage: 2~3S (7.4V~11.1V)
Max Current: 8amps
Max Watts: 85W
Shaft Diameter: 2mm
Mounting Holes: M2 x 12/16mm
Prop Size: 5 x 3 to 7 x 2.4ins
7.4V with 6 x 2ins prop, 17060rpm/6.5A/48.1W
7.4V with 7 x 2.4ins prop, 17060rpm/7.6A/56.2W
11.1V with 5 x 3ins prop, 25590rpm/6.5A/72.2W
11.1V with 6 x 2ins prop, 25590rpm/7.6A/84.4W
Features of the DYS 16amp ESC:
• Designed specifically for multi-rotors
• Twisted servo cable to reduce interference
• Fast throttle response
• Low resistance MOSFETs
• Small and lightweight
• Thicker PCB for better heat dissapation
• Maximum refresh frequency up to 500Hz throttle signal, compatible with all flight controllers
• High performance capacitor filter
Specs of DYS 16amp ESC:
Model: 16A Micro Opto multi-rotor ESC
Input Voltage: 2~4S (7.4~14.8V)
Continuous Current: 16 amps
Burst Current: 18 amps
Signal Frequency: 20-500Hz
Output PWM Frequency: 18KHz
Application: Compatible with SimonK & BLheli firmware
BEC: No BEC, opto only
Dimensions: 23 x 12 x 4.5mm
4 x DYS BE1806 2300KV brushless motors
4 x DYS 16amp Opto speed conrollers
4 x Prop adapters
4 x Sets of mounting screws
Bought them a while when there was an offer for 40$. Today I replaces my 2206 Multistar Baby Beast 2 with them because they where broken after some crashes. I was leery if the can replace them and lift my 600gr "racer". I have an 280 ZMR clone frame and 5040 props with 2200mah 3s lipo. But now I'm amazed. This little motors lift my quad better than my old ones. I did not use the ESCs yet, but my old Afro 12A work great with the motors.
The only downside the prop mounts are 4 time CW and not 2CW and 2CCW which would be great for quadcopter usage. Luckily my old ones fit the motors.Non ho ancora provato gli esc in dotazione a questo pacchetto, ma credo che non abbino alcun problema. Per quanto riguarda i motori posso dire per esperienza perche' gia acquistati in precedenza, che sono ottimi per frame 250. Complessivamente il pacchetto acquistato in offerta e' molto vantaggiosoPerfect for an all in one 250 or similar sized project. I have bought 3 sets and have had no issues. Requires some soldering. But I custom soldered all the ESCs to custom fit my frame. Wrote this review to counteract the previous customer's unfair 1star review just because they had some pilot error.Great combo, bought two sets, updated the ESC and flys like ad dream. Use them with Jiyi P2 and after firmware update of Jiyi and ESC fuly compatibleThis setup is quality all the way. I am running 6x3 props with a 3s 2200mAh lipo and it powers my quad no problemWould of be nice if there were bullet connectors for the ESC's in the box.
Only blank cable here but bullet pin's on the motors.
Will get back when i get everything flying ;)
Bought this set for my first FPV Quadcopter. Just got them together and put on and they work so far as intended. As a beginner, it is kind of nice ESC and motor are correctly sized - Later you can always upgrade motorne or ESC. The more advanced users, I believe not choose these but as a beginner you have to start somewhere :)Great little motor and esc combo. I recommend purchasing the DYS ESC USB Linker ESC Programmer as well. It made getting all of the esc's set the same very easy. Mine were all set differently when I got them. I put these on a H King Color 250 Class frame and a Nano Tech 1300 mah 3s with a KK 2.1.5 controller. Flies great. Just make sure you get the KK mini. Had to carve the controller board a bit to make it fit.Great combo !
At this price, i don't think you can get any better.
Perfect for your first QuadcopterGot this combo its great put a amp metre on the quad and its saying 25A at full on 4s on 5/3 3blade props. And the esc are cold the motors are just warm if u use larger props the amps will go up. Havant flown it much so i will see if it lasts