DYS Rhino VE80A 80A 2-8S Brushless ESC for 1/8 RC Cars & Rock Crawlers
DYS Rhino VE80A 80A 2-8S Brushless ESC for 1/8 RC Cars & Rock Crawlers
Awesome!
Copy and Share the Below URL
Accessories
Special Price $35.19
You save $19.80
Was $54.99
Special Price $7.69
You save $3.30
Was $10.99
Special Price $5.44
You save $0.66
Was $6.10
The Rhino VE80A electronic speed controller with 32-bit MCU has been designed primarily for competitive 1/8 rock crawlers, but it is also very suitable for other types of cars and trucks. The preloaded AM32 custom firmware is optimized for RC rock crawlers, but the firmware can be configured for other applications by using the DYS USB-Link (not supplied).
Using Sinewave technology the ESC allows for a very smooth, and quiet start-up, especially at ultra low-speeds, and the variable drive frequency controls the speed and torque to bring you the ultimate driving experience. The remote high-amp 10A BEC system is adjustable in 4 steps from 5.2 to 8.2 volts making it suitable for a wide range of servos including HV types. It also comes with a waterproof, long-life E-Switch for switching the unit on and off, but please note that the ESC is itself not waterproof. Other features include low voltage protection and stalled/jammed rotor protection to ensure no accidental damage can be done to the ESC. A cooling fan is not supplied, but included are the solder pads so that you can connect a fan of your own choice.
The VE80A ESC perfectly matches the DYS Rhino RM-S20 series of rock crawler brushless motors.
Features:
• Preloaded AM32 custom firmware that's optimized for RC rock crawlers
• Sinewave technology allows for a very smooth, and quiet start-up, especially at ultra low-speeds
• Variable drive frequency
• High-performance 32-bit MCU
• Built-in adjustable high-amp 10A BEC system from 5.2 to 8.2 volts
• Low voltage, and stalled/jammed rotor protection
• Electronic water-proof E-switch for long life and reliability
Specs:
Type: DYS Rhino VE80A 80A Brushless ESC for 1/8 RC Cars & Rock Crawlers
Input Voltage: 2~8S (7.4~29.6V)
Continuous Current: 80A
BEC Output: 10A@5.2~8.2V adjustable in 4 steps
Battery Input Cables: 14AWGx150mm
Motor Output Cables: 14AWGx150mm
Connectors: None included
E-switch Cable: 120mm
Remote BEC Cable: 250mm
Dimensions: 60x29x15mm
Weight: 57.2g
Includes:
1 x DYS Rhino VE80A 80A Brushless ESC for 1/8 RC Cars & Rock Crawlers
Requires:
Input and output connectors
Frequently Bought Together
-
$61.79 -
PROPDRIVE V2 4258 500KV Reversed Shaft Brushless Outrunner MotorSKU: 9192000393-0
$45.05
-
Turnigy USB Linker for Aquastar, Super Brain & Fatboy ESCSKU: T-USBLink
Special Price $0.83
You save $9.60
Was $10.43
-
FLYSKY FGR4S AFHDS3 Mini Receiver (Waterproof)SKU: 9114000082-0
$35.01
-
Turnigy Graphene Panther 4000mAh 3S 75C Battery Pack w/XT90SKU: 9067000411-0
Special Price $27.19
You save $4.80
Was $31.99
-
T-Connector to XT60 Battery Adapter Lead (2pc)SKU: 258000017
$15.44
-
Turnigy Graphene Panther 450mAh 4S 75C Battery Pack w/XT30SKU: 9067000436-0
Special Price $6.41
You save $4.58
Was $10.99
-
Mini Black T Connector Pack (5 Pairs)SKU: 258000111-0
Special Price $2.46
You save $0.11
Was $2.57
-
Turnigy Rapid 6500mAh 2S2P 140C Hardcase LiPo Battery Pack (ROAR Approved)SKU: 9067000528-0
Special Price $25.56
You save $2.84
Was $28.40
-
Turnigy GT5 6Ch 2.4GHz AFHDS 2A Receiver (Gyro)SKU: 9114000078-0
$18.51
