The TB275 multirotor frame is one of the top performing quads in its class. This frame has proven to be extremely durable, affordable and sleek design.
The frame kit has built in LED lights up front and rear to really light up your flying. The PCB for power distribution is super-slick with the ease of installation of your chosen ESC’s, flight controller, optional FPV gear and an on board XT60 power connection.
The front bulk head of the frame not only makes this frame super strong, but also mounts the head lights up front and has the provisions for your FPV camera. Around the back of the frame you are treated with a super bright wide LED light to light up the sky.
Stylish, red anodized frame parts really give this frame character, with tough and durable design to rip up the sky.
• Strong and durable construction
• Integrated PCB
• Lightweight machined alloy hardware with red anodizing
• LED lights Front and Rearward facing
4 x Motors 2204~2208 1800~2300kv
1 x Battery 1000~1800mah 11.1~14.8V (3~4 cell Lipoly)
4 x Propellers 5~6 inch
4 x ESC 12~20A
1 x multi-rotor flight controller
4ch radio (6ch recommended for FPV and FC use)
FPV gear (optional)
Got this frame some days agoe just Easy to put together no need for the missing instruksion
and this is my first Racing ever to build
and after having don som Crases still no damages to the frame all works fine
nice job This si my set up KINGKONG Force 200 4 x 2204-2300kv 5 inc tryde 6 inc No problem Turnigy 2200mAh 3S 35C Lipo Pack Thinking on going 4S but bc of the LD's i probaly have to make some smaller modif stil easy to do
over all i love this frame Looks Cool and handels nice !!!!I bought this frame because i thought it was nice strong frame en good quality but nope. In the discription is says that the frame can handle 6 inch totally not true! if you put a 6 inch on the motors you will see that props hit the XT60 connecter from the batterij. You can bend it a little bit or if it good is for you xt60 in don't think so. the front leds died after the second flight with 4s batterij. the arm breaks easily and the finish is untidy. for the people who are interested please think carefully consider whether you want to frame because it gonna cost you more than thisBest craft I own, Love it to bits, Tough as hell, super agile, stable and fast. Also looks very neat everything fits inside the frame, I have a 500mw 5.8 videoTx, 1300 battery, mini KK board, Afro ESC's 12A, and a camera ripped out of a CCTV camera... it's perfect about 8 mins flight time...just received the frame, very good quality, but some parts are missing compared to E-turbine, both camera frame (FPV "Mobius), and middle deck are missing compare to original set up. (after checking the above pictures, it seems there are not meant to be sold with it, but that means you can't do the same assembly as on the original one)Great frame lights get hot on 4s motors not running but cold when running really bright on 4s With the rear light flashing easy to see Got the DYS BE1806 2300KV Combo set with 16amp and its brilliant really quick with a naze 32
crashed a few times but Havant broke anything yet but the frame is cheap but greatGood plug and play frame; however, plastic arms have broken multiple times. You might want to consider that this frame may turn into a bigger expense, so just spend the money up front to buy a more sturdy frame.looks good sitting in pieces on my bench, cant put together due to lack of instructions in the box or under the file tab.