A big 450 size heli thats fantastic looking, and is easy to fly.
The EC-135 is one of only a few true beginner helicopters that can be flown indoor & out! Powered by two 370 motors, the EC-135 has great power against the wind and included is a 2.4Ghz radio and powerful 1,000mAh 2S LiPo battery.
The EC-135 comes ready to fly, you only need to include the AA batteries for the transmitter to be ready to fly in under 5 minutes.
Dead easy to fly, large size and looks great in the sky. The EC-135 is a fun first step into R/C helicopters.
Main Rotor Diameter: 450mm (17.7 inch)
Length: 490 mm (19.29 inch)
Height: 260 mm (10.23 inch)
Flying Weight: 380g (13.4 oz)
Driven system: 2 x 370 carbon brush motor
Servo: 2 x 9g servos
Battery: 7.4V 1000mAh Lipo battery
Control system: 4CH 2.4GHz Transmitter
8 x AA Batteries for the Transmitter
A Lipo Battery charger
Got mine today and came with no damage. I give it only one crown because the motor shuts off when the batteries cells get to 4.5 volts (same on 4 different batteries), so flight time is next to nothing and if you are to high in the air with it, say goodbye to your nice new heli. I have gotten lots of good products from HK and always shipped well, but I wish I did not buy this Heli.great heli, nice and stable very good for beginerSo after binding the tx/rx again I took it out for a spin and about 2 minutes into the flight the blades decided to clip each other causing it to fall out of the sky and smash on the ground, come on guy's, as a chopper................this would make a good paper weight if only it was a little smaller, this product's a dud.I was going to make a night flyer out of this but it will not work as described, rtr, I shouldn't have to work on a cheap toy to have some fun, thats why I buy them, use them, break them and move on, this one didn't get that far, put your money towards a better chopper and learn to fly, just my 2 cents.No spare blades available! that's very bad. I had to buy some AIRY Harden Blade II (AX-07) at h-e-l-i-p-a-l site. shame on you, hobby king!if you want parts for it use your head most planes from hobbyking are copies of other planes this is a copy of the arttech ec135 all its parts fit itThis heli is very easy to fly but for first users I only recommend to fly outdoor with smooth wind because it is very light model.
Dispite it have a pretty good looking, an accurate view shows that the heli deserves some improvement for the blades (plastic, not very resistant), because of this I developed a way to reinforce the blade without unbalance them (see the videos section) and I bought some new blades for spare.
The batteries compartiment is very fragile. Some hard landings makes open the cover, making the battery go out. And this is boring but tolerable. (puting one stick to hold the box cover or something else)
Still speaking about the batteries compartiment, is very short. Not many cells will be compatible and won't fit in it (I'm affraid only 7.4v 2C will work inside). But with some skills, you will be able to cut some plastic and enlarge the box or put an extra battery out of cover.
His body cover is made in plastic and have some stickers to hide the imperfections, but in overall is harmonic.
I made myself some improvements as put lights in to cabin and an extra XT-60 connector for zippy battery. I'm planning put some extra lights in it in rear and bottom (like a flashlight). But this is another chapter...
I'm doing some improvements for the transmitter as making an extra XT-60 connector for use with Li-po Batteries. But this is another chapter too...
DoMotors overheat, VERY poor build quality. Mine has stopped working after the first day, I think the motor controller is blown. Soon as I apply thrust the whole thing cuts off. Battery is charged so its not that. REAL RUBBISH>Eu sempre quis um desse, acho bem mais facil de pilotar do que os hk 450 que so servem para cair, pelo menos esses co-axial podem brincar dentro de casa e tambem aguentam um bom peso para levar um chaveiro ou caneta espi.If you by this helicopter don't break it as you can not even get spare blades for it as it is not supported by hobbyking. Real bad VALUE