New Items Forum
Register

Total Price

$0.00

Cart 0 Cart 0 Loading...

EDF35 with 11000kv Motor Assembled

EDF35 with 11000kv Motor Assembled

Shipped From:
  • Global
QTY:

Now save save $0.00 $0.00

$26.36
Status:
In Stock
Weight:
55 g
SKU:
A235-100
WANT FREE SHIPPING? Click here to find out more!

EDF35 with 11000kv ADH-100 Motor pre-assembled 
Small EDF, great for parkjets or small foamies.
Run with a 2S Lipoly gives excellent performance.

Spec.
Motor: Brushless outrunner ADH-100 11000kv
Inner Diameter: 35mm
Outer Diameter: 37mm
Weight: 19g
8 Blade Rotor

Test data;
@ 7.4v
Current: 18.9A
Thrust: 170g / 6oz
Power: 139.9W

@ 8.0v
Current: 21A
Thrust: 186g / 6.56oz
Power: 168W

  • SKU A235-100
  • Brand -
  • Capacity (mAh) -
  • Shipping Weight(g) 55.00
  • Length 66.00
  • Width 56.00
  • Height 66.00
Upload video

Only registered users can upload video. Please, log in or register

Only registered users can write reviews. Please, sign in or sign up

A very powerful motor but it is not 35mm.

It is 38mm, that's sad

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

A very powerful motor but it is not 35mm.

It is 38mm, that's sad

I recently recieved another product from hk i was not happy with. the items were 2 edf fans that were in poor condition. I was offered $6 dollars by way of compensation. Neat offer but the units I had intended to purchase and paid $48 for were the ones advertised. The ones i recieved looked very much like they had been returned by another happy customer and then sent to me. Sending a faulty product and then crediting the customer for the cost of what the parts to make a new one would cost is a rediculous plan for any company. I was told after i rejected the offer that I could return the product at my own cost and would get a restocking fee deducted from the credit for the value of the items in my account. I dont even think thats legal. At this point with the cost of postage and whatever the unknown "restocking" fee is there is little value in pursuing the affair any further. After spending around $1300.00 with your company over the last 9 months I have yet to recieve an order that i have been totally satisfied with. The most recent order I made had 3 batteries that I am planning to use in 2 edf jets and a jarge Fpv plane which I am ordering from another site because I am not willimg to have to deal with hk customer service levels and packaging ability. That was allready 3 sales your service has cost you, prior to this last incident. As you have probably guessed you have now mis

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

I recently recieved another product from hk i was not happy with. the items were 2 edf fans that were in poor condition. I was offered $6 dollars by way of compensation. Neat offer but the units I had intended to purchase and paid $48 for were the ones advertised. The ones i recieved looked very much like they had been returned by another happy customer and then sent to me. Sending a faulty product and then crediting the customer for the cost of what the parts to make a new one would cost is a rediculous plan for any company. I was told after i rejected the offer that I could return the product at my own cost and would get a restocking fee deducted from the credit for the value of the items in my account. I dont even think thats legal. At this point with the cost of postage and whatever the unknown "restocking" fee is there is little value in pursuing the affair any further. After spending around $1300.00 with your company over the last 9 months I have yet to recieve an order that i have been totally satisfied with. The most recent order I made had 3 batteries that I am planning to use in 2 edf jets and a jarge Fpv plane which I am ordering from another site because I am not willimg to have to deal with hk customer service levels and packaging ability. That was allready 3 sales your service has cost you, prior to this last incident. As you have probably guessed you have now mis

Tested on the bench,.. 23A!! on 2cell 1000mha 20c batt- too much! I'll be running this on 1cell batt.

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

Tested on the bench,.. 23A!! on 2cell 1000mha 20c batt- too much! I'll be running this on 1cell batt.

man i lost my project just be cose thys stupd sheep fan it is garbage i lost 1.800 bucks all my f35 project im geving up

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

man i lost my project just be cose thys stupd sheep fan it is garbage i lost 1.800 bucks all my f35 project im geving up

Looks cute.. lol.. be installing in micro 35mm f18 in couple of weeks, should go like a rocket..

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

Looks cute.. lol.. be installing in micro 35mm f18 in couple of weeks, should go like a rocket..

These EDF units seem well made though of the two I purchased a few months ago, one of the fans was rubbing on the outer housing. I managed to make some clearance and commissioned them yesterday. Within a few minutes of run time (fortunately on the bench) both of the units shed their fans. One has its hub destroyed and is not serviceable the other just came off and went spinning towards the ceiling. The fans look as though they were glued on with Loctite or similar and they are a tight fit onto the shaft so ayn adhesive in the bore of the fane was scraped off and left as a dob on the end of the shaft - given that there is 170 odd grams trying to pull the fan off this method of fixing seems very inadequate - they are definitely value for money but only if the perform as expected which to date they have not. I need now to try to attach the fans so they will stay on.

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

These EDF units seem well made though of the two I purchased a few months ago, one of the fans was rubbing on the outer housing. I managed to make some clearance and commissioned them yesterday. Within a few minutes of run time (fortunately on the bench) both of the units shed their fans. One has its hub destroyed and is not serviceable the other just came off and went spinning towards the ceiling. The fans look as though they were glued on with Loctite or similar and they are a tight fit onto the shaft so ayn adhesive in the bore of the fane was scraped off and left as a dob on the end of the shaft - given that there is 170 odd grams trying to pull the fan off this method of fixing seems very inadequate - they are definitely value for money but only if the perform as expected which to date they have not. I need now to try to attach the fans so they will stay on.

Tieto turbiny su urcene na simulaciu preplnania motorov v lietadlach. jedna sa o zvuk, pekne vyhotovenie.

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

Tieto turbiny su urcene na simulaciu preplnania motorov v lietadlach. jedna sa o zvuk, pekne vyhotovenie.

Upload your file

Only registered users can upload files.
Please log in or register to start helping your fellow hobbyists today!