EP Fiberglass Twin-Hull Racer (Swifter)
This fibreglass racer is quite large, measuring over 650mm in length and running a 540L brushless inrunner motor. You will need a 3000mAh or larger 2S lipoly pack as power.
Both Motor and ESC are watercooled. You only need to include your own receiver and battery.
Motor: Brushless Inrunner 540L
ESC : AE 80A brushlessServo : Advance Bi-Directional ESC
Size: 650 x 310 x 140mm
Type: Fibreglass/Ply twin-hull design.Propeller : D42xP1.4Required :BatteryTX and RX
It is a racer, even running only on 2S LiPo. First time you switch on the radio and the receiver, when accelerating instead of running the engine/propellor you will ear a music from the ESC. Let it play till the end (I think it is a kind of reseting or tunning)and only after it will work.
In the water the control and speed are amazing for 2S LiPo and from the sound of the engine it looks that does not reach full RPM so, I will test it on 3S LiPo next time.
Temperature on the engine and ESC was low (cool) so for sure it will handle 3S.
Do not forget to lubricate the shaft before first test, some water may get in.
Very good RACING boat!