Looking for a professional standard, long-range aerial survey or FPV model? The EVE-2000 could be just what you're looking for.
Designed from the outset as a no-compromise, practical model that will easily carry almost any FPV or other gear that you can think of inside the cavernous equipment bay. In fact, the equipment bay is big enough to hold an iPad 3 with room to spare!
Load carrying isn't the only consideration when designing a high performance FPV model; aerodynamic efficiency is also an important factor. The EVE-2000 features a minimalist streamlined fuselage pod and boom design and 2240mm span, high aspect ratio wing to give maximum efficiency and a great glide performance.
The twin 2815 650kv brushless motors make for a powerful drive system and they also give peace of mind in the unlikely event of one ESC or motor failing during a long-range flight. The contra-rotating propellers give an additional degree of stability to the EVE-2000 in flight in addition to cancelling out propeller torque reaction.
Structurally, plywood reinforced EPO foam and carbon fiber tail boom give the EVE-2000 the strength needed to cope with all the demands made of it, while molded plastic parts make assembly strong, accurate and fast.
Many FPV flyers operate out of less than ideal model flying terrain, so for the sake of simplicity and drag reduction the EVE-2000 is designed to operate without an undercarriage from either a hand or bungee launch. The high mounted (T-tail) tailplane keeps that out of harm’s way during the launch and recovery phases of flight.
A basic 4 channel transmitter and receiver and a 4 cell Lipo battery is the basic minimum of equipment needed to finish the EVE-2000 ready to fly, but such is the flexibility of the model that you will be able to add a huge array of other items and functions to tailor it to meet your own operational requirements such as larger flight batteries (up to 16000mAh recommended) video recording devices, larger cameras and auto pilot systems.
For no fuss, out-and-out mission flexibility, the EVE-2000 is hard to beat!
• Plug and play
• Tough EPO and carbon fiber structure
• Huge equipment bay
• High mounted T-tail
• Twin motors
• Big 48dm2 (744sq in) wing area
• Wide mission capability
Wing span: 2240mm
Radio: 4CH min
Motors: 2816 650kv (included)
ESC: 40A (included)
Propellers: 10x6 (included)
Servos: 12g (included)
Wing area: 49dm2 (744sq in)
Battery: 5S~6S 10000 ~ 16000mah
CG: 80~85mm Back from wing leading edge
Flying weight: 3800 ~ 4600g
EVE-2000 FPV model
2816 650kv brushless motors (x2)
10x6 3 blade propellers (x2)
40A ESC's (x2)
6~8A UBEC (x2)
12g servos (x4)
Battery connectors (XT60)
4CH RC equipment (min)
4S Lipo battery
- Blade Count:
I really love this plane. Got it as "valentines day" offer.
A MUST buy for FPV :)i hade the maiden today, it was a little difficult because i made mistake by laminating the wings at get much twist in it.
The plane flyes with 6s10.000 Multistar verry smooth and is slow landing withouth using flaps.