This stunning Extra 330L is a superbly finished large scale model that has been designed very much with extreme 3D aerobatic's in mind. The airframe combines a very low flying weight with generous control surfaces to give the RC pilot precise control and amazing performance.
As well as featuring a high quality airframe, this Extra 330L really looks the part courtesy of it's fantastic colour scheme which has been achieved with quality covering that has been expertly applied and a deep gloss paint finish on the huge cowl and spats, the scheme is plain Red on the underside for orientation. For practicality, the wings and horizontal stabilizer are plug in, the the generous size canopy is screw on for security.
As well as being a looker, this large Extra is a performer and fitted with a powerful 50cc engine or electric equivalent, you can expect more than enough performance for prop hanging and those big, big maneouvers, yet the low wing loading will give you precise control during most extreme low speed 3D aerobatics. Set on low rates, this Extra becomes a very capable sport model, either way, nothing flies like a big model, especially one as capable as this!
Wing Area: 94.5dm2
Flying Weight: 7100g
4 Channel/6 Servo
Your Own 6 Channel TX/RX
50cc~55cc Gas Engine (or electric equivalent)
5 x Digital MG High Torque Servo's + 1 x Throttle Servo
Very nice plane, very secure and easy to fly.
Caution the photographs are not accurate there is no tunnel on the plane for the pipe... (that's why the 4 crowns).
Need average modelistic capabilities because there is no manual.
It flies well with a DLE55RAI have to say that having received this very quickly from the UK warehouse, the quality is excellent, with a decent hardware selection supplied this seems a very good deal for the price.
The covering has been very accurately applied and sums up a very professional looking product. The wing tube and undercarriage are both aluminium which adds some weight but I shall see how heavy the finished build comes out. I am installing a DLE 55cc. Hitec HS-5685H HV servos and the plan is to fly sport aerobatics rather than 3D.
I will be happy to submit a flight review once assembled.
Ich habe die Extra330l 50ccm gebaut.
Als Antrieb verwende ich den Tunigy Rotomax50cc mit dem Turnigy dlux 160A HV Brushless Speed Controller.
Den Erstflug habe ich mit 10S Lipo Zellen und einer APC 24 x 14 gemacht .
Ging schon richtig gut. Nun habe ich mal eine Menz 24 x 12 mit 12S Lipo getestet und damit habe ich nun eine Drehzahl von 6500 U/min bei 100A.
Morgen bekomme ich eine CFK Luftschraube mit 26 X 10 . Drfte nochmals einen Standschub zuwachs geben und der Strom drfte auch noch etwas weniger werden.
Bei 5000mA habe ich eine Flugzeit von 7 min.
This is an original painting download now [24kb] now with decals download now [3068kb] original painting download now [24kb] My Extra 330L with Decals download now [3068kb] Extra330L mit Rotomax50cc download now [193kb] extra 300 lp 30cc download now [1451kb] Extra 330L Manual download now [3134kb]