Extreme accuracy Prop/Rotor balancer
This unit can balance most blades on a magnetically suspended axel, giving total friction free movement. For heavier large blades such as 24inch or larger and heli rotors you can use the quad bearing low friction rollers. The unit also includes an adaption for balancing tail rotors or rotor heads.
Kit includes everything plus an in-built spirit level and heli-rotor adapter.Length : 110mmWidth : 91mmHeight : Adjustable (Max 114mm)
Balance almost any size propeller or helicopter blade.
*Propeller in photograph is slightly unbalanced and due to the friction free rotation of this unit a small weight inbalance becomes very obvious.*Color may vary.
This product is a product that should be utilized as necessary to meet the balance of the propeller.Do not waste your time and money on this! Don't even think balancing your prop on this. The device itself is not balanced. Spinning it without prop is not even. So totally unreliable, unprofessional and misleading. Mine goes to trash right away!Does exactly what it needs to. Balancing my props has made my flights extremely smooth.for this price i think you can't find one be more accurat.
On the conrad shop is one that is symmular ,just the price is differently higher.perfect balance every timeVery well made, also works on boat props. I am going to machine down the 3mm shaft to the same length as the other shaft to be more accurate on the small diameter boat props.Both supplied shafts are bent which makes any proper balancing impossible. In addition to that all 4 blue aluminium cones have their holes drilled off-center, so even if you had by a miracle one of the shafts straight, you wouldn't be able to balance the prop properly because of this cheap cones. Save your money and buy something else.
I paid about twelve bucks more for a proper brand name balancer.
Sorry it is unsuccessfull for magnetic balance.... It's tools are unbalancedvery nice looking paper weight i have. cones are a nice shade of blue and drilled off center so they wobble when i spin them onto the shaft. one of the shafts were slightly bent. lesson learnedMy cones were also slightly out of balance although with the larger set only one was very slightly out & useable as they are. I received 2x straight shafts so got lucky there.
It is otherwise easy to put together, sturdy & the cnc parts are accuratly cut. The spirit level isn't the most accurate but does work fine.
Works great for err, balancing props.
Holes doesn't match download now [172kb] Manual Eng from HobbyKing download now [222kb] notice by MADISON download now [713kb] BalancerManual01 download now [1004kb] BalancerManual02 download now [837kb] PopBalanceInstructions download now [1936kb]