Register

Product Finder

Settings

Useful links

Live Chat
 
[["US","AU","GB","DE"]]
Register

F-15 Fighter Jet w/ Twin 64mm EDF Kit

F-15 Fighter Jet w/ Twin 64mm EDF Kit

Discontinued Product

Please continue searching for a similar product.
Rating:
Stock:
OUT OF STOCK
Weight:
2369 g
SKU:
F-15TwinKIT
Product
Description
Highly scaled aerobatic fighter jet with a twin EDF system.
The F-15 Fighter jet comes without electronics and you required Twin 30A brushless electric ducted fan system plus servos.
This well detailed jet uses two 64mm ducted fan units to provide fast throttle response and a high top speed. Maneuverability is increased greatly with the special asymmetric structure of it''s wings.

Spec.
Wing Span : 750mm
Length : 1080mm
Flying Weight: 800g
Duct fan: 64mm
Battery compartment size: 87x40x32mm
 
Required:
Your own TX & RX
Servo: 5x9g
Motor: 2x2627 Brushless outrunner 3900kv 
ESC: 2x30A
11.1V 2200mah 3S 25C Lipo 
 
*Model available in two colours. We are unable to guarantee the model will be either color.
 
Product
Specifications

Additional Information

  • SKU:
    F-15TwinKIT
  • Brand:
    N/A
  • Capacity (mAh)
    No
  • Shipping Weight(g)
    2369.00
  • Length:
    1035.00
  • Width:
    255.00
  • Height
    345.00
Community
Discussions
Rate&
Review

Write Your Own Review

Only registered users can write reviews. Please, sign in or sign up

verified_user Quality
trending_up Value
playlist_add_check Overall
I ordered this plane from the US warehouse two and a half weeks ago and still have not recieved it yet. When i did get in touch with someone they finally gave me a track numb after two more days. Hopefully my plane wont be as slow as the service at HK and oh yea by the wayTHANKS HK LOL!!!!
verified_user Quality
trending_up Value
playlist_add_check Overall
verified_user Quality
trending_up Value
playlist_add_check Overall
Plane arrived in perfect condition from USA warehouse in about a week. Instructions are very lacking, but is an easy build for anyone who has built a foamy jet kit before. Fans need some work to get to balance but they sound good now. Using two 5000kv motors with a 3300mh 30c 3s battery. I had to hog some foam out to get it to fit, but it balances at the 630mm from the nose, which is perfect. The control rods for the elevators have too much flex, carbon fiber rods over them fixed that. The elevators at stock throws are lacking so I increased them to 125pcnt. Plane flies great, not as fast as I would have hoped but still quick enough and a blast to fly, and for the price it is a definite winner.
verified_user Quality
trending_up Value
playlist_add_check Overall
verified_user Quality
trending_up Value
playlist_add_check Overall
I bought this fighter some weeks ago, when it arrived, i was so happy. Today was the first flight and it crashed.
BE AWARED the EDF system that comes is just a rubbish, if you don't want to waste 2 motors and crash the plane buy another (at least) fans. the two fans exploded in the take off breaking the shafts of the motors (NEW MOTORS) and crashed just after.

The plane is ok it brings two Y connector (one short and another long) and it needn't too many mod for installing the electronics.

I'll review again when i receieve another 2 motors and fans
verified_user Quality
trending_up Value
playlist_add_check Overall
verified_user Quality
trending_up Value
playlist_add_check Overall
Type your review here.

Try to include as much data as possible.

Does this model include the ducted fans units less the motors or do I need to purchase the shrouds & fan blades? Is ther any way to be sure I get the desert tan camo version, what are they shipping now? What are the two you have now?
verified_user Quality
trending_up Value
playlist_add_check Overall
verified_user Quality
trending_up Value
playlist_add_check Overall
So just finished two sorties flew like I knew it would twin power sets rule. pushed it along at half throttle for five minutes puffed one hobby people 2200 lipo (at full Throttle) for one minute, thus the half throttle mention. Rolls are tight with 60dual rates ROG and steering easy as 1,2,3 CG nonfactor its built in put the 2200 in the open space behind the pilot seat over the steering servo flys on perpendicular axis. with dual rates on anyone can handle this stable flyer with docile landing nothing more staisfying than kit building success though I love the convinience of PNF!
verified_user Quality
trending_up Value
playlist_add_check Overall
verified_user Quality
trending_up Value
playlist_add_check Overall
twins fans are awsome next time use 1/8 inch drill for your motors /fan adapters . use two 30 amp esc with a y connector. take about a screamer just about jump off the ground.
verified_user Quality
trending_up Value
playlist_add_check Overall
verified_user Quality
trending_up Value
playlist_add_check Overall
bought the kit and put in the turnigy $6.99 outrunners with 3mm shaft. The instructions only show how to glue the foam together. If you are new this kit is not for you. put in HK 25/30amp ESC and corona 6ch rx. had to buy GWS fans and hubs with grub screws and hex wrench included from the local hobby store Kit come with smaller size shaft hubs. All servos are outside so once you put in the power sets its a breeze to link up. Its a quick build and a beauty to look at!!!
verified_user Quality
trending_up Value
playlist_add_check Overall
verified_user Quality
trending_up Value
playlist_add_check Overall
please , see the link bellow :

Translated Review to english:
http://translate.google.com.br/translate?u=http3A2F2Fwww.e-voo.com2Fforum2Fviewtopic.php3Fp3D99431823994318&sl=pt&tl=en&hl=&ie=UTF-8


The original review is in portuguese.
http://www.e-voo.com/forum/viewtopic.php?p=994318#994318

Well, I will give 5 stras to this plane , because it is very stable, manuverable, easy to build, fly good in low speed, nice plane.
I recomend !
verified_user Quality
trending_up Value
playlist_add_check Overall
verified_user Quality
trending_up Value
playlist_add_check Overall
That plane is just beautiful. The sound with 2 EDF having 4500kV motors on 4S is amazing. Flying weigh with 2 ESC 45A and 4S 3000 40C is 1kg. CG at 620mm from the nose is perfect With that propulsion config, pulling 90A, it is a bullet! great acceleration and vertical clim! The ones who say that elevator are too small, you just have to configurate mixes with your TX to add elevator input on main wings ailerons (as a flying wing principle)add you will see that this plane is very manoeuvrable. The only problem is the weak and ugly landing gear, but it is light, we cannot have all at the same time. I love that plane :)
verified_user Quality
trending_up Value
playlist_add_check Overall
verified_user Quality
trending_up Value
playlist_add_check Overall
In addition, comes with servo y-connectors so you can save yourself $3.99. I recieved the blue one as displayed. Five blade fans and sturdy landing gear without wobble.
verified_user Quality
trending_up Value
playlist_add_check Overall
View all reviews
Upload
Videos
Upload video
Upload
Files

Only registered users can upload files. Please log in or register to start helping your fellow hobbyists today!

Product Tags

Use spaces to separate tags. Use single quotes (') for phrases.