New Items Forum
Register

Total Price

$0.00

Cart 0 Cart 0 Loading...

F4U Funfighter - EPO 600mm (PNF)

F4U Funfighter - EPO 600mm (PNF)

Discontinued Product

Please continue searching for a similar product.
SKU:
F4U-PNP
WANT FREE SHIPPING? Click here to find out more!

So, you want a fast parkflyer!?
Forget boring scale details and shelf queen good looks this F4U Corsair is built for speed and all out fun! Dog fight with friends on 3S or use a 4S pack for heart pounding high speed passes, either way the Fun fighters have you covered. The combination of the light weight EPO airframe, a high power brushless motor and a simple aileron and elevator setup place these models amongst the most exhilarating park flyers to hit the market this year. Dont be left out of the fun!

This model comes plug and fly and only requires a few minutes of assembly time and flies like its on rails thanks to the one piece molding technique used in the construction. All you will require to have the F4U Corsair in the air is a 3~4S 850mAh 20C Lipoly battery and your own transmitter and receiver (Tx/Rx)

Specs:
Length: 553mm
Wing Span: 600mm
Flying weight: 320g
Prop: 5.5x4.5 (Included)
Motor: 2825-1950kv Brushless outrunner motor
ESC: 20A High-Spec 3~4S
Servo: 3 x 8gram

Required:
20C 3-4S 11.1-14.8V 850mAh Lipoly Battery
4 Channel Transmitter and Receiver

Note: For a truly Ballistic upgrade try the Turnigy nano-tech 850mAh 4S 45~90C Lipo Pack. See the related items below.

  • SKU F4U-PNP
  • Brand -
  • Capacity (mAh) -
  • Shipping Weight 1234.0000
  • Length 705.00
  • Width 95.00
  • Height 320.00
  • F4U Funfighter - EPO 600mm
Upload video

Only registered users can upload video. Please, log in or register

Only registered users can write reviews. Please, sign in or sign up

well my new £49 mini f4u corsair arrived about 1 hour ago. to my dispair the centre of the box was crushed halfway down. ive had models from alfamodels cz in the check republic and their box is purpose made to be shipped to the public worldwide and you dont get this . fortunatly the only substantial damage was at the rear of the fusilage where the fairing was allmost broken off. the tailplane assembly has/had to be tied down with string and wedged with half pegs so it would glue flat,the wing has/had the same treatment. the fusilage top deck is 1cm higher than the back so will try to steam it a bit.. the tailplane is slightly bowed as well.i have the wildcat version which i fly on 2s 1000ma as its plenty fast enough for me being a bit old.it flies well in a bit of wind so that is the perpouse of getting the corsair as with small models you can pack more in the car.i easliy get 6 or more. this will have a 2s 100ma as well.hopefully it will fly as good as the wildcat. looking to get the mini seafury next.may goto the warehouse to get it so theres no chance of damage. overall value 5 quality is 4,very good but parts need checking. needs addressing very large dont crush lables and a more substantial box or collect from warehouse option

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

well my new £49 mini f4u corsair arrived about 1 hour ago. to my dispair the centre of the box was crushed halfway down. ive had models from alfamodels cz in the check republic and their box is purpose made to be shipped to the public worldwide and you dont get this . fortunatly the only substantial damage was at the rear of the fusilage where the fairing was allmost broken off. the tailplane assembly has/had to be tied down with string and wedged with half pegs so it would glue flat,the wing has/had the same treatment. the fusilage top deck is 1cm higher than the back so will try to steam it a bit.. the tailplane is slightly bowed as well.i have the wildcat version which i fly on 2s 1000ma as its plenty fast enough for me being a bit old.it flies well in a bit of wind so that is the perpouse of getting the corsair as with small models you can pack more in the car.i easliy get 6 or more. this will have a 2s 100ma as well.hopefully it will fly as good as the wildcat. looking to get the mini seafury next.may goto the warehouse to get it so theres no chance of damage. overall value 5 quality is 4,very good but parts need checking. needs addressing very large dont crush lables and a more substantial box or collect from warehouse option

I had really good luck with an under hand throw with some a** behind it. 4s around 1/2 throttle. 3s a little more. Great plane and a blast to rip around the park

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

I had really good luck with an under hand throw with some a** behind it. 4s around 1/2 throttle. 3s a little more. Great plane and a blast to rip around the park

Arrived 2 days after ordering from the Aus warehouse. Slight damage to rear of fuselage and propeller. Aileron servos have not been fitted square in wing so servo arms are rubbing on slot in wing. Otherwise a nice looking kit. Make sure you run over factory adhesive as the job looks as if it was rushed. look forward to the maiden. Also the speedy is only rated for 2-3S so an updated speedy required for 4S operation. Nano-tech 850 3S is a perfect fit behind outrunner. Nice little pilot is also included and 2 spare props.

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

Arrived 2 days after ordering from the Aus warehouse. Slight damage to rear of fuselage and propeller. Aileron servos have not been fitted square in wing so servo arms are rubbing on slot in wing. Otherwise a nice looking kit. Make sure you run over factory adhesive as the job looks as if it was rushed. look forward to the maiden. Also the speedy is only rated for 2-3S so an updated speedy required for 4S operation. Nano-tech 850 3S is a perfect fit behind outrunner. Nice little pilot is also included and 2 spare props.

This is my second time buying this.

It is soo fun and SOOOO FAST!



THe first one I crashed about 4 times. But after the 4th, there was more glue and tape than plane. I had to retire it. I look forward to flying it again.

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

This is my second time buying this.

It is soo fun and SOOOO FAST!



THe first one I crashed about 4 times. But after the 4th, there was more glue and tape than plane. I had to retire it. I look forward to flying it again.

This is a very handy speed modell ! Works great with 4s,850mah, Nanotech. Works even greater with 3s,2200,Zippy, 40C (no matter of weight). Do not care about windy weather, neither hot temperatures. I reconmend to replace esc by 30Amp Turnigy plush or 40A HK esc, more power ! very stable and a great scale optic. I flew the first one more than 1 year (approx. 50-60 take offs). When crashed, easy to repair. Great for air races !!!

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

This is a very handy speed modell ! Works great with 4s,850mah, Nanotech. Works even greater with 3s,2200,Zippy, 40C (no matter of weight). Do not care about windy weather, neither hot temperatures. I reconmend to replace esc by 30Amp Turnigy plush or 40A HK esc, more power ! very stable and a great scale optic. I flew the first one more than 1 year (approx. 50-60 take offs). When crashed, easy to repair. Great for air races !!!

Had My Funfighter Corsair for about 8 months now, very fast, awesome plane for the price, have crashed a few times and repaired to fly again, will buy another now that I have airtime with this bird and figured out all the ins and outs to balancing it and flying that fast, Way to go HK A

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

Had My Funfighter Corsair for about 8 months now, very fast, awesome plane for the price, have crashed a few times and repaired to fly again, will buy another now that I have airtime with this bird and figured out all the ins and outs to balancing it and flying that fast, Way to go HK A

Very nice, little, fast plane. Fly with 4S!!!

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

Very nice, little, fast plane. Fly with 4S!!!

4-25-15 I just received my Funfighter Corsair today and was happy to see that the esc was upgraded to a Skywalker 30A esc from the advertised 20A BUT it clearly says on the esc that it is for 2-3s Lipos?! Come on Hobbyking. If you're going to make sure it's 4s capable then put a 4s esc in it!! I guess I'll put a Turnigy true 30A 2-4s esc in it since I'll be running it with a 1000mah, 4s, 45-90c battery. Also as others have said the elevator is bowed up on the ends. No problem I'll just put a heavy book on it to flatten it out.

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

4-25-15 I just received my Funfighter Corsair today and was happy to see that the esc was upgraded to a Skywalker 30A esc from the advertised 20A BUT it clearly says on the esc that it is for 2-3s Lipos?! Come on Hobbyking. If you're going to make sure it's 4s capable then put a 4s esc in it!! I guess I'll put a Turnigy true 30A 2-4s esc in it since I'll be running it with a 1000mah, 4s, 45-90c battery. Also as others have said the elevator is bowed up on the ends. No problem I'll just put a heavy book on it to flatten it out.

My Experiences:

I did some flights with the corsair now. I tried 3s and 4s and I think its great fun with both setups. The foam quality is pretty okay and the bird looks nice, too. If its in the air, you dont see the non-scale issues very much. Im using the stock equipment and only removed the spinner, because it wasnt balanced well and looks better without!

One thing is very important:

I had a crash when a friend started the bird, because I obviously started with too much throttle...corkscrew...crash!

So my starting procedure now is like this:

A Grab the plane near the COG from the upper side,

- On 3s: Little more than half throttle and throw it in an flat angel (20)
- On 4s: Less then half throttle and same throwing technique.

Then the plane is just fun...flying like on rails...fast bur not very tricky...I love it :-)

BUT NO FULL THROTTLE STARTS!

I hope this helps you to avoid unnecessary starting-crashes!!!! Happy landings :-)

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

My Experiences:

I did some flights with the corsair now. I tried 3s and 4s and I think its great fun with both setups. The foam quality is pretty okay and the bird looks nice, too. If its in the air, you dont see the non-scale issues very much. Im using the stock equipment and only removed the spinner, because it wasnt balanced well and looks better without!

One thing is very important:

I had a crash when a friend started the bird, because I obviously started with too much throttle...corkscrew...crash!

So my starting procedure now is like this:

A Grab the plane near the COG from the upper side,

- On 3s: Little more than half throttle and throw it in an flat angel (20)
- On 4s: Less then half throttle and same throwing technique.

Then the plane is just fun...flying like on rails...fast bur not very tricky...I love it :-)

BUT NO FULL THROTTLE STARTS!

I hope this helps you to avoid unnecessary starting-crashes!!!! Happy landings :-)

This plane is really FAST! A great little park flier. I gave it a 3 in in quality because the parts came slightly chipped, and they did not fit together well! Great plane though, flies stable and fast. I have yet to fly on a 4 cell but i will work my way up to it!

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

This plane is really FAST! A great little park flier. I gave it a 3 in in quality because the parts came slightly chipped, and they did not fit together well! Great plane though, flies stable and fast. I have yet to fly on a 4 cell but i will work my way up to it!

  1. 1
  2. 2
  3. 3
  4. 4
  5. 5
  6. ...
  7. 7
Customer files
My F4u_01 Download [82]
My F4u_hatch modify Download [91]
Offset motor issue Download [2053]
manual Download [10096]
No File Name Download [62]
Color mod Download [3243]
F4U Problem fitting canopy/hatch Download [2197]
FrSky Taranis Icon Download [1]
FrSky Taranis Icon Download [1]
No File Name Download [329]
  1. 1
  2. 2
Upload your file

Only registered users can upload files.
Please log in or register to start helping your fellow hobbyists today!

Combine Essential Items and Save