FatShark’s NEW upgraded FPV Pan/Tilt Mount, w/180deg MG 9g pan servo and 90deg tilt servo. This new style has a 180deg MG servo and Custom wire routing to allowing maximum interference free camera angles with the included shielded A/V cable. Compatible with FatShark 600TVL FPV tuned camera and other similar cameras used for FPV systems.
• 180 deg 9g MG pan servo
• Custom bind free wire routing
• Included shielded A/V cable
Camera Mount Holes: 23mm
After some time with it now, there is a few improvements that would be made. The tilt servo is plastic gears and stripped after one flight (granted little heavier camera and bracket attached). Both servos I noticed aren't really that smooth and tend to move in surges. I love the compactness to it but I think with slightly better servos would have made it top notch (emax ES09MA fits tilt servo with a spacer in it).This is a great little compact unit, functions well. I had a 3D printed adaptor made up locally to fit a runcam and it fit great. Should still have room for a gimble down the road.Nice Mount, best of this si that it is compact, other P/T are way biggerGood product. There is no need for longer screws to mount the camera. Look into Files tab above, the back plate of the FatShark camera is supposed to come off, before mounting. The original screws from the camera is re-used.Pan and tilt my pilot cam.with this guy will be more exciting.Good quality !!This is an excellent hassle-free pan & tilt setup. I used this setup on my Bixler 2 and Fatshark Attitude V2 goggles. All I had to do was assign two free channels to PPM, then I connected the two servos, and finally activated the trinity head tracker. This changes the whole way you see flying fpv. Instead of being firmly mounted in a single position, you are able to move about and look down or up at the sky. It's especially beautiful when turning and seeing your wing . The pan servo is a digital servo which does have a true 180 degrees of travel. The mid point is a bit different so I can see more of the right wing than I can the left wing, but it all works good. To mount the camera, you need to take the back-plate off and use the screws to secure it to the mount. Overall very happy with this!very smooth movement for fpv head tracking. I give it four stars because you don't get a full 180 degrees. I recommend this for a good head tracking setupYou can use this as just a tilt camera my removing the bottom servo. It's a little long if you're running on small multi-rotors such as Blackout Mini Spider Hex it can take up some space. But if you want tilt on your mini, this is probably a good choice.
Would be nice if they offered just a tilt mount for FPV multi rotor racing.