Register

Product Finder

Settings

Useful links

 
[["US","AU","GB","DE"]]
Register
Shipped From:
  • Global

FC 28-05 Brushless Outrunner 2840Kv

FC 28-05 Brushless Outrunner 2840Kv

QTY:

Now save save $0.00 $0.00

$7.05
Rating:
Stock:
Weight:
39 g
SKU:
FC2805

Suggestion Box

Please let us know if you found any issues with this product listing.
We take our customer comments very seriously and in many cases our website modifications and product updates are a result of your comments!

Price War

If you've seen a product elsewhere for a better price, please let us know! HobbyKing pride themselves on offering the best price, so if there if you see something cheaper elsewhere, let us know!

Product
Description

Tiny but mighty!
We introduce to you our new CF range of outrunners.
Over the coming weeks as development finishes we will be stocking more variety, turns, sizes and styles of these outrunners. All at crazy low prices.
Be sure to sign up for our newsletter and we will let you know the moment the new models are released.

Spec ;
Weight: 26g (with wire & sticker etc)
Shaft: 3mm
Motor Length: 37mm
Diameter: 28mm
Stator Size: 22x5mm
Suggested prop: 5~6inch
Voltage: 7.4v (2S)
Kv: 2840RPM/V

Data ;
Prop (APC) 6x4
RPM 13000,
MAX current (<60d) 12A
Thrust 413g(0.91lb)

Prop (APC) 7x4
RPM 9900,
MAX current (<60d) 14.4A
Thrust 381g(0.84lb)

 

 

 

 

 

Product
Specifications

Additional Information

  • SKU:
    FC2805
  • Brand:
    No
  • Weight(g)
    39.00
  • Length
    40.00
  • Width:
    29.00
  • Height:
    37.00
  • Kv(rpm/v)
    2840.00
  • Max Currents (A)
    14.40
  • Power (W):
    0.00
  • Length B (mm):
    26.00
  • Can Length D(mm)
    9.00
  • Max Voltage(V)
    7.00
  • Shaft A(mm):
    3.00
  • Unit Weight (g):
    26
  • Diameter C(mm)
    29.00
  • Total Length E(mm)
    37.00
  • Resistance (mh):
    0.00
Community
Discussions
Rate&
Review

Write Your Own Review

Only registered users can write reviews. Please, sign in or sign up

verified_user Quality
trending_up Value
playlist_add_check Overall
Test setup: 3s 2200mAH, 5X5 TGS Sport propeller, (I know it is rated for 2s)
After running approximately 30 seconds: 11.4V, 19.7A, 225W, 470g thrust.
The outer case (rotor) was only slightly warm to the touch, but there was a slight overheat smell so I touched the stator mount and I could barely keep my fingers on it so the setup is a bit agressive for this motor, use at your own risk, I know I will, lol Good balance, runs smooth.
verified_user Quality
trending_up Value
playlist_add_check Overall
verified_user Quality
trending_up Value
playlist_add_check Overall
Excelent Motor with delta wings
verified_user Quality
trending_up Value
playlist_add_check Overall
verified_user Quality
trending_up Value
playlist_add_check Overall
bought these for my mini quad, they are working excellent, also appear to work on 3s as well as 2s and run cool (using 6x4 props). Running the 10amp SS esc's. Very smooth!!
verified_user Quality
trending_up Value
playlist_add_check Overall
verified_user Quality
trending_up Value
playlist_add_check Overall
best motor for the price
verified_user Quality
trending_up Value
playlist_add_check Overall
verified_user Quality
trending_up Value
playlist_add_check Overall
In my specification environment, it is as follows.

There is no problem in power and durability now.

However, since the current cut by ESC will take place if a full throttle is used, it is necessary to make the preset value of a throttle curve about 85pcnt at the maximum.

verified_user Quality
trending_up Value
playlist_add_check Overall
verified_user Quality
trending_up Value
playlist_add_check Overall
Vykonny motor, ale dosel nefunkcni.
verified_user Quality
trending_up Value
playlist_add_check Overall
verified_user Quality
trending_up Value
playlist_add_check Overall
This motor is speced at 2S but works well with 3S, good value for money, and very cheap.
verified_user Quality
trending_up Value
playlist_add_check Overall
verified_user Quality
trending_up Value
playlist_add_check Overall
Used this motor initially for my scratch built, 24" wingspan F-22. With an all up weight of just over 10oz. it scooted along at just over 60mph with a 1000mAh 40C 3S battery. Great little motor. I really want to get more to make an aerobatic hyper Xcopter with, but they are out of stock now.
verified_user Quality
trending_up Value
playlist_add_check Overall
verified_user Quality
trending_up Value
playlist_add_check Overall
Almost at once it was necessary to rewind. Thin to you at first has bent, and has then broken. But the shaft is a lot of falling.
verified_user Quality
trending_up Value
playlist_add_check Overall
verified_user Quality
trending_up Value
playlist_add_check Overall
I love this little motor. I used an online calculator for the prop size and pitch and found that with a 3S LiPo, it will turn a 6x3 no problem with a pitch speed of 91mph. On my 10oz. scratch built F-22 with a 24 inch wing span, this setup with an 18A ESC pushes my plane to just over 60mph. On a cold and windy day, with winds at 20mph and 25-30mph gusts, I took it to the ball field at the school ground and flew it around with no problem on full throttle for 4 minutes. I brought it in and the motor and ESC were cool to the touch. The battery was a little warm so I used it to warm my hands a little. Ha ha! All in all a great little motor and a great price.
verified_user Quality
trending_up Value
playlist_add_check Overall
View all reviews
Upload
Videos
  • RC F-22 Raptor $50 Scratch Build Maiden

  • UFO Flying Saucer with Improved Tractor Beam

Upload video
Upload
Files

Only registered users can upload files. Please log in or register to start helping your fellow hobbyists today!

Product Tags

Use spaces to separate tags. Use single quotes (') for phrases.