The FC-Model X330 Multi-Rotor frame is a simple, light and solid frame. The main frame is glass fiber while the arms are constructed from square aluminium tube. Giving this frame a super solid base for your 330mm project.
Assembly is a simple process and a breeze to build with all pre-drilled holes in its simple bolt together design. Included in the kit is all the hardware required to complete the build. The X330 also comes with protective propeller guards to help reduce the wear and unfortunate broken propellers.
If you ever wanted to build up a simple frame and get into the air quicker, then the X330 is a perfect solution.
• Built from quality glass fiber and aluminium
• Pre-drilled holes
• Easy assembly
Height: 73mm with included landing gear
Weight: 163g (w/out electronics)
Motor:Mount Bolt Holes: 15/19mm
4 x Motors 1506~2208kv (or similar size/kv)
4 x 12~20 Amp ESC
4 x 7x5~8x4 Prop (2CW & 2CCW)
1 x Multi-Rotor Flight controller board
4ch radio (6ch recommended for FPV and FC use)
1 x 1000~1800mAh 3s 11.1v LiPoly battery
FPV gear (optional)
I love this simple 300 frame bought it on a whim threw it together with some spare parts I had .Used 4 Simon K 20 amp speed controllers NEO 300 1200 kv motors 7 inch props CC3D flight controller and 2.4 GHZ 9 channel turnigy reciever witha zippy compact 25c 2200 Batt.It rock and rolls its very responsive agile and fast .Its one of my favorite quads and I have the least invested .Down note motor mounts very thin I broke everyone and replaced them one by one with homemade aluminum mounts .The alumium arms are also a little soft recomend using a bushing inside the arm for all 4 mounting holes.Happy flying !!!