This is the FeiYu Tech Mini 3D Gimbal designed for a range of action cameras such as the Turnigy HD Action Cam or GoPro4, 3 or 3+ type cameras.
Weighing in at under 150g without a camera and with a super-sleek design, the mini 3D is one of the smallest and lightest 3 axis gimbals around.
This version is designed to work independently of your flight control system, only requiring a power supply and making it easy to setup and use.
In addition to its stand-alone stabilization function, three more operational modes allow you to create professional quality stabilized video from your multi-rotor. You can also manually operate the gimbal from your transmitter for the ultimate in control.
• Heading Follow Mode enables the gimbal to follow the pitch, roll and yaw angles of your aircraft for line of sight video, damping out any unwanted buffeting as it does so
• Heading and Pitch Follow Mode keeps the roll angle fixed while following the pitch and yaw angles of your aircraft.
• Heading Lock Mode locks heading, pitch and roll to the pre-determined position while allowing that position to be controlled from your radio.
As if this wasn't enough, the FeiYu Tech Mini 3D gimbal includes a video output cable that plugs into your camera to give a live video stream from your camera via your A/V transmitter.
The FeiYu Tech Mini 3D Gimbal is a compact, neat and feature-packed stand-alone gimbal that is an ideal complement to your FPV and video setup.
• 3 stabilization modes
• 6 point damping
• Integrated control and motor units
• 3 Axis stabilization
• Yaw, Pitch and Mode control from transmitter
• Can be mounted inverted for aircraft use
Input voltage: 7~17V
Overload protection: 800mA
RC Input: Yaw, Pitch, Mode
Pitch angle: +/-150°
Roll angle: +/- 45°
Yaw angle: +/- 120°
Dimensions: 120 x 76 x 88mm (without camera)
FeiYu Tech Mini 3D gimbal
Video output cable
JST type power lead
I read all the reviews before making my mind on this gimbal. When I received it I hot glued the USB plug to strengthen it. I downloaded all the necessary software but after I installed it on my Tarot 650, it worked flawlessly! Truly a quality gimbal that is PnP! I would recommend
this to anyone!This product is exactly what I expected.. after reading the reviews and downloading all the software, I installed it on my Tarot 650 and it worked straight out of the box. The only setup was in the TX with endpoint for tilt. Very happy with it.This product when setup properly works quite well. However, this product has some quality control issues such as a broken micro usb connector from first insertion and poor cables which lead to the unit not powering up. After these issues are fixed, this product will receive a higher rating.just received my gimbal from Singapore (9 days from placing the order excellent!!!) opened the box it al looks well built and nothing missing I am going to fit it in my Alien 560 to replace my 2d gimbal maybe do a further review when its all up and runningvery cool small and high quality gimbledunno about this, havent tested. Nice n shiny finish, good covering.Nice n shiny finish, good covering. looks Fantastic itemI love this gimbal, easy to connect, just put it on 3s and it will go in heading follow mode, connect three servo channels and you can apply offsets to pitch and heading and control the modes of the gimbal (I use heading follow and heading locked). These videos on youtube demonstrates what you get. Total weight with a gopro was enough to for the F450 from DJI.
3 servo channel connected https://youtu.be/_N-TA-P0bvM
1 servo channel connected https://youtu.be/vp9g6K1a6gE
Videos before 20-sep did not have the gimbal installed, well, the difference is remarkable.
Purchased this gimbal and the threading in the gimbal itself was to small to allow the included screws to mount the GoPro to fit. This was very annoying as I can't use the included bracket without modifying it. So at the moment I am just using rubber bands to hold the GoPro in place. Other than this the gimbal is functioning great.This is a real Plug and Play gimbal, smooth, tested, nice construction, completely easy to set the radio controlled set up. AMAZING.
I got the Basecam 32 bit mounted on a Legacy 3 Axis gimbal and is kind of a pain in the .. to set up even with the Auto PID tune which in my mind are always a nightmare.
This gimbal is straight forward set up and function just 3 minutes mounting and go fly, clean setup also.Great Gimbal for a low price.
Performs way better than many other Gimbals.
The Axis can exchange each other if you tip it over a certain point.
For Example Roll Becomes YAW and YAW becomes toll if you tip it over 90 to the back.
Works well on a Handheld Setup or on a Copter.
No File Name download now [885kb] No File Name download now [940kb] Manual download now [2520kb] Feiyu Tech Mini 3D.doc download now [23.50Kb] Feiyu 3D Gimbal download now [23.50Kb]