New Items Forum
Register

Total Price

$0.00

Cart 0 Cart 0 Loading...

FF GeeBee R2 EP .25 ARF

FF GeeBee R2 EP .25 ARF

Shipped From:
  • Global
Discontinued Product

Please continue searching for a similar product.
SKU:
FF_geebee
WANT FREE SHIPPING? Click here to find out more!

Not for the feint of heart. The Granville Brothers all American racing plane the GeeBee is an Iconic flying machine!

Built with a fiberglass fuselage the GeeBee R2 EP is nicely finished and painted and comes complete with wheel pants.
This plane will take you around 4hrs to complete. If you are afraid of drills or small fabrication work, then this isnt the plane for you.
WARNING: This plane should only be flown by experienced pilots!

Spec.
Material: Fiberglass Fuselage / Balsa wings
Wingspan: 1036mm
Length: 623mm
Wing Area: 21dm sq.
Height: 250mm
Airfoil: NACA2416
Flying Weight: 1200g (depending on battery/motor used)

Power System required (Sold separately).
Prop: 7060 minimum Diameter
Motor: 35-30 or larger outrunner 1700kv+
ESC: 30A +
Battery: 1600mAh 3S +
Servos: 9g ~20g

  • SKU FF_geebee
  • Brand -
  • Capacity (mAh) -
  • Shipping Weight 2950.0000
  • Packaging Length 665.00
  • Packaging Width 275.00
  • Packaging Height 555.00
Upload video

Only registered users can upload video. Please, log in or register

Only registered users can write reviews. Please, sign in or sign up

This is the worst model for fly, if you bougth or will buy, please put a really strong motor (similar 46 or more).

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

This is the worst model for fly, if you bougth or will buy, please put a really strong motor (similar 46 or more).

Ein Tipp zum Fahrwerk

Beide Gestaenge,durch LEICHTES biegen,angleichen und von dem Ende auf das das Rad kommt ca 5mm abschneiden(nur einen Stellring nutzen).

Jetzt kommts! Die zwei Felgenhaelften eines Rades kann man,mit SANFTER Gewalt trennen. Man hat dann pro Rad zwei Felgen und einen Reifen.

Die Teile knnen im Radhaus einzeln und der Reihe nach wieder auf der Radnabe zusammen gefgt werden. Ich hoffe ich konnte

helfen.

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

Ein Tipp zum Fahrwerk

Beide Gestaenge,durch LEICHTES biegen,angleichen und von dem Ende auf das das Rad kommt ca 5mm abschneiden(nur einen Stellring nutzen).

Jetzt kommts! Die zwei Felgenhaelften eines Rades kann man,mit SANFTER Gewalt trennen. Man hat dann pro Rad zwei Felgen und einen Reifen.

Die Teile knnen im Radhaus einzeln und der Reihe nach wieder auf der Radnabe zusammen gefgt werden. Ich hoffe ich konnte

helfen.

Beautiful plane and with a fantasrtic finish. It is truly amazing how it can be sold at a mere 80 bucks. Imagine making only a fibre glass body for that price. It's a great deal and I will buy one more just to keep for spare. Or use with a glow engine. The plane is actually not made for electrics. There is no space for battery but have plywood cut out for a tank. Wood motor mount is not very good and I think I see on the picture here that HK use a HXT mount. With a Turnigy C35-36 motor the mount HXT-C28-26 (height 48 mm) should fit nicely so that the prop will stay close to the cowling.You have 85 mm distance inside from fire wall to cowling opening. I regretfully did not use this mount but the supplied one but will do this on the next plane. And I think you need to angle motor mount a few degree down and to the right. The fire wall is straight in 90 degrees. I used the dummy motor and cut out ventilation holes around the periphery - looks much better than the large gaping hole up front.

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

Beautiful plane and with a fantasrtic finish. It is truly amazing how it can be sold at a mere 80 bucks. Imagine making only a fibre glass body for that price. It's a great deal and I will buy one more just to keep for spare. Or use with a glow engine. The plane is actually not made for electrics. There is no space for battery but have plywood cut out for a tank. Wood motor mount is not very good and I think I see on the picture here that HK use a HXT mount. With a Turnigy C35-36 motor the mount HXT-C28-26 (height 48 mm) should fit nicely so that the prop will stay close to the cowling.You have 85 mm distance inside from fire wall to cowling opening. I regretfully did not use this mount but the supplied one but will do this on the next plane. And I think you need to angle motor mount a few degree down and to the right. The fire wall is straight in 90 degrees. I used the dummy motor and cut out ventilation holes around the periphery - looks much better than the large gaping hole up front.

A lot of work,more than 5 hour for finish, manual incomplete. But looks nice.

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

A lot of work,more than 5 hour for finish, manual incomplete. But looks nice.

Esta precioso pero Sencillamente no lo compres, sigue mi consejo...

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

Esta precioso pero Sencillamente no lo compres, sigue mi consejo...

Plane looks GREAT out of the box, unfortunatly a few problems with decals. It's 7-11 decal sheet all 7's no 1'or 11's... Second ditch the crap they give you and run goldenrod for controls, stock to heavy and flimsy. Second running a 1000kv motor 3s 2500 and a 9x6 apc WILL NOT lift off the ground. Buried the nose after 25 feet or so, didn't even think of lifting off. suggest go to 4 cell OR switch to a 10x6 maybe a 11x4.5. Defienatly move wheels as far forward as will allow in wheel pants, and rule of thumb 1/3 wing chord. CG perfect but as I said with my set up would NOT take off in a 50mph headwind!.... :( Bigger battery or larger prop!...

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

Plane looks GREAT out of the box, unfortunatly a few problems with decals. It's 7-11 decal sheet all 7's no 1'or 11's... Second ditch the crap they give you and run goldenrod for controls, stock to heavy and flimsy. Second running a 1000kv motor 3s 2500 and a 9x6 apc WILL NOT lift off the ground. Buried the nose after 25 feet or so, didn't even think of lifting off. suggest go to 4 cell OR switch to a 10x6 maybe a 11x4.5. Defienatly move wheels as far forward as will allow in wheel pants, and rule of thumb 1/3 wing chord. CG perfect but as I said with my set up would NOT take off in a 50mph headwind!.... :( Bigger battery or larger prop!...

&#12385&#12423&#12387&#12392&#37325&#12356&#12391&#12377&#12364&#12289&#36074&#24863&#12399&#12356&#12356&#12391&#12377&#12290

&#39131&#12435&#12391&#12427&#23039&#12399&#12363&#12431&#12356&#12356&#12391&#12377&#12364&#39131&#12400&#12377&#12398&#12399&#12385&#12423&#12387&#12392&#38627&#12375&#12356&#12391&#12377&#12290

&#12456&#12524&#12505&#12540&#12479&#12399&#36890&#24120&#12398&#21322&#20998&#12367&#12425&#12356&#12398&#21205&#12365&#12395&#12375&#12383&#12411&#12358&#12364&#12356&#12356&#12391&#12377&#12290

&#12414&#12392&#12418&#12395&#39131&#12400&#12379&#12427&#12475&#12483&#12486&#12451&#12531&#12464&#12364&#20986&#12427&#12414&#12391&#20309&#24230&#12418&#33853&#12392&#12375&#12390&#12375&#12414&#12356&#12414&#12375&#12383&#12289&#12289&#12289&#12290

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

&#12385&#12423&#12387&#12392&#37325&#12356&#12391&#12377&#12364&#12289&#36074&#24863&#12399&#12356&#12356&#12391&#12377&#12290

&#39131&#12435&#12391&#12427&#23039&#12399&#12363&#12431&#12356&#12356&#12391&#12377&#12364&#39131&#12400&#12377&#12398&#12399&#12385&#12423&#12387&#12392&#38627&#12375&#12356&#12391&#12377&#12290

&#12456&#12524&#12505&#12540&#12479&#12399&#36890&#24120&#12398&#21322&#20998&#12367&#12425&#12356&#12398&#21205&#12365&#12395&#12375&#12383&#12411&#12358&#12364&#12356&#12356&#12391&#12377&#12290

&#12414&#12392&#12418&#12395&#39131&#12400&#12379&#12427&#12475&#12483&#12486&#12451&#12531&#12464&#12364&#20986&#12427&#12414&#12391&#20309&#24230&#12418&#33853&#12392&#12375&#12390&#12375&#12414&#12356&#12414&#12375&#12383&#12289&#12289&#12289&#12290

&#37325&#12356&#12391&#12377&#12364&#36074&#24863&#31561&#12424&#12367&#12391&#12365&#12390&#12356&#12414&#12377&#12290

&#39131&#12435&#12391&#12427&#23039&#12364&#12363&#12431&#12356&#12356&#12391&#12377&#12290

&#12456&#12524&#12505&#12540&#12479&#12364&#12363&#12394&#12426&#21177&#12367&#12398&#12391&#24369&#12417&#12395&#12290

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

&#37325&#12356&#12391&#12377&#12364&#36074&#24863&#31561&#12424&#12367&#12391&#12365&#12390&#12356&#12414&#12377&#12290

&#39131&#12435&#12391&#12427&#23039&#12364&#12363&#12431&#12356&#12356&#12391&#12377&#12290

&#12456&#12524&#12505&#12540&#12479&#12364&#12363&#12394&#12426&#21177&#12367&#12398&#12391&#24369&#12417&#12395&#12290

muito bonito o geebee e uma vergonha que no podemos comprar pois no vem para o brasil

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

muito bonito o geebee e uma vergonha que no podemos comprar pois no vem para o brasil

Regarding the landing gear :

Forget the delivered and wheel pants : make a new one, 40mm higher and 40mm fronter with whell pants made of 6mm depron. This makes it "land-able" and give a more scale aspect !! It is also needed to reinforce the attachement in the wing.

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

Regarding the landing gear :

Forget the delivered and wheel pants : make a new one, 40mm higher and 40mm fronter with whell pants made of 6mm depron. This makes it "land-able" and give a more scale aspect !! It is also needed to reinforce the attachement in the wing.

  1. 1
  2. 2
  3. 3
  4. 4
  5. 5
Customer files
Gee Bee front Download [490]
Upload your file

Only registered users can upload files.
Please log in or register to start helping your fellow hobbyists today!

Combine Essential Items and Save