Flycolor X-Tower 40A (F4 Flight Controller w/40A 4in1 BL_32 ESC)
Flycolor X-Tower 40A (F4 Flight Controller w/40A 4in1 BL_32 ESC)
Copy and Share the Below URL
Accessories
Special Price $7.32
You save $2.11
Was $9.43
The Flycolor X-Tower 40A provides a powerful combination of F4 flight controller and 32-bit 4-in-1 ESC. It is easy to assemble and provides quick processing response with power (3.3V, 5V, 12V) for all your components including, VTX, FPV camera, buzzer, LED, etc. Suites most 170~450 size mutirotors.
The structure has built-in vibration dampening as well as silicon wires between decks to minimize vibration impact for a more stable flight. The F4 flight controller has a STM32F405 MCU combined with an MPU-6000 SPI Gyro for smooth performance. The built-in OSD displays the built-in real-time current flow and can be used for tuning the Betaflight firmware. Plus, a 32G TF card reader for the black box.
The ARM 32-bit Cortex MCU-STM32F051 works at 48MHz for quicker response and control. It can handle multiple throttle signals and the Dshot signal is supported at any rate up to at least Dshot1200. There is an auto detection of the throttle signal on power up. Damped light regenerative braking provides higher efficiency and a quicker response to slow down motors.
This is one powerful combination to get you flying with ease and at a great price.
Features:
Flight Controller:
• STM32F405 32-bit processor (MCU)
• MPU-6000 (SPI) Gyro
• Betaflight OSD (on-screen display)
• Supports Betaflight_OMNIBUSF4SD firmware
• Supports PPM, SBUS, SPEKTRUM1024/2048 etc. remote control / receiving mode
• Max.32G TF-card, record and save flight/black box data
• FC integrated 3.3V, 5V, 12V for a receiver, VTX, camera, buzzer, LED and other peripheral devices
ESC
• ARM 32-bit Cortex STM32F051 MCU, frequency up to 48 MHZ.
• Supports Flycolor_X_Cross_BL_32 ESC firmware
• Damped light does regenerative braking
• Supports regular 1-2ms pulse width input, as well as Oneshot125, Oneshot42 and Multishot
• Dshot signal is supported at any rate up to at least Dshot1200
Specs:
Continuous Current: 40A
Burst Current (10s): 45A
FC V(OUT): 3.3V/5V/12V
Input: 3~6S LiPo Battery
Weight: 20g
Size: 48.5x41.5x18mm
Installation holes: 30.5x30.5mm, M3
Typical Applications: 170~450 Multirotor
Includes:
X-Tower (FC and PDB)
XT60 with lead
Various wire connectors
Capacitor
Dampening rings
Please note: A copy of the instruction manual is available under the "Files" tab above.
Luuk | Verified Buyer
-
Overall
-
Quality
-
Value
Great for beginners
Jun 21, 2020
Luka | Verified Buyer
-
Overall
-
Quality
-
Value
Great for the price
May 19, 2020
Ozz | Verified Buyer
-
Overall
-
Quality
-
Value
Great FC for Price
Apr 15, 2020
Megabalin1 | Verified Buyer
-
Overall
-
Quality
-
Value
Very good
Nov 15, 2019
gLaMoUT | Verified Buyer
-
Overall
-
Quality
-
Value
bad
Oct 10, 2019
Megabalin | Verified Buyer
-
Overall
-
Quality
-
Value
Very good
Aug 06, 2019
| Flycolor X-Tower Manual | Download [2] |
Only registered users can upload files.
Please log in or register to start helping your fellow hobbyists today!
