Register

Product Finder

Settings

Useful links

Live Chat
 
[["US","AU","GB","DE"]]
Register
Shipped From:
  • Global
  • USA

Foam-Cure EPP and EPO Foam Glue 4 oz.

Foam-Cure EPP and EPO Foam Glue 4 oz.

QTY:

Now save save $0.00 $0.00

$4.03
Rating:
Stock:
Weight:
130 g
SKU:
9117000006-0

Suggestion Box

Please let us know if you found any issues with this product listing.
We take our customer comments very seriously and in many cases our website modifications and product updates are a result of your comments!

Price War

If you've seen a product elsewhere for a better price, please let us know! HobbyKing pride themselves on offering the best price, so if there if you see something cheaper elsewhere, let us know!

Product
Description
FOAM-CURE™ is a silicone based adhesive that works very well on EPP and EPO foams. It is crystal clear and cures to a more flexible consistency than CA. It is, however, not instant bonding like CA and there is no accelerator to speed it’s curing. To obtain a faster initial bond when bonding two pieces, FOAM-CURE™ can be applied to one piece and after the two are joined, they can then be pulled apart. After letting it air dry for about ten minutes, FOAM-CURE™ will act like a contact cement when the parts are rejoined, resulting in enough tack strength to allow the next steps of assembly. Full strength is reached in 10-12 hours.
 
FOAM-CURE™ works with all foams, and will actually bond most other materials. It will bond wood and plastic to foam, and is a good canopy glue. FOAM-CURE™ does not, however, cure flexible enough to act as a hinge for aircraft control surfaces. Its limitations occur when bonding large areas of two non-porous materials. FOAM-CURE™ requires exposure to air for drying. If one tried to bond, for example, a half-dollar coin to glass, over 90% of the adhesive would never cure, since the solvent it contains would have no where to evaporate.
Product
Specifications

Additional Information

  • SKU:
    9117000006-0
  • Brand:
    N/A
  • Weight(g)
    130.00
  • Length
    155.00
  • Width:
    40.00
  • Height:
    40.00
Community
Discussions
Rate&
Review

Write Your Own Review

Only registered users can write reviews. Please, sign in or sign up

playlist_add_check Overall
trending_up Value
verified_user Quality
Superb glue for foamy's and depron just read the instructions and you will not a problem 5* product .
playlist_add_check Overall
trending_up Value
verified_user Quality
trending_up Value
verified_user Quality
playlist_add_check Overall
it's a contact adhesive; anyone having problems needs to read the instructions ! on depron it has been perfect - the cobwebs it makes on separating before the final join are interesting and need to be kept off other surfaces; the final bond is fast and solid after re-opposing the "dry" surfaces - recommended ++
trending_up Value
verified_user Quality
playlist_add_check Overall
playlist_add_check Overall
trending_up Value
verified_user Quality
Very good glue, 100% happy
playlist_add_check Overall
trending_up Value
verified_user Quality
verified_user Quality
playlist_add_check Overall
trending_up Value
Well this stuff is great .. Read the bottle and it states -- close the joint then PULL apart and wait 30 seconds to so many mins then close the joint again and it will be a stronger bond ... And it is correct I have not had one fail on me . 5 out of 5 .
verified_user Quality
playlist_add_check Overall
trending_up Value
playlist_add_check Overall
trending_up Value
verified_user Quality
Excellente colle
playlist_add_check Overall
trending_up Value
verified_user Quality
playlist_add_check Overall
trending_up Value
verified_user Quality
Colle parfaite pour l'EPP après ajout d'un peu d'acétone pour la fluidifier légèrement.
En indoor, suite à casse, enduire une face, joindre les deux parties, séparer et laisser sécher de 30s à 1 minute, joindre et renforcer avec du ruban adhésif et ça revole aussitôt. Le lendemain on peut oter le ruban.
Bien sûr, ne pas utiliser ce mélange sur le polystyrène et le dépron.
playlist_add_check Overall
trending_up Value
verified_user Quality
playlist_add_check Overall
trending_up Value
verified_user Quality
Excellent glue. Used it many times, dries clear and strong. I highly recommend it.
playlist_add_check Overall
trending_up Value
verified_user Quality
verified_user Quality
trending_up Value
playlist_add_check Overall
no good. Doesn't expand, stick, or solidify as well as the other chinese clear foam glue that comes in a big toothpaste looking package. That one is FAR Superior. This just doesn't bond EPO or foam board. It doesn't expand much, small bubbles but not much expansion, and it solidifies into a very clear soft gel. It isn't sticky at all. The clear chinese foam glue I normally get from HK is FAR Superior and so sticky it gets everywhere.
verified_user Quality
trending_up Value
playlist_add_check Overall
verified_user Quality
trending_up Value
playlist_add_check Overall
I like this glue. The odor is ok, and it needs time to dry. After drying, it is strong and clear, perfect for glueing an elevator into place, glueing small parts to the fuselage and for some repairs at home, if needed. This glue works like it is written in the description and i highly recommended it.
verified_user Quality
trending_up Value
playlist_add_check Overall
verified_user Quality
trending_up Value
playlist_add_check Overall
Usata per modelli in EPP e' fantastica. Non so come si comporta con polistirolo e simili. Raccomandazione: fare asciugare bene
verified_user Quality
trending_up Value
playlist_add_check Overall
View all reviews
Upload
Videos
Upload video
Upload
Files

Only registered users can upload files. Please log in or register to start helping your fellow hobbyists today!

Product Tags

Use spaces to separate tags. Use single quotes (') for phrases.