Total Price

$0.00

Cart 0 Cart 0 Loading...

FRS Failover Regulator Switch 5A-Plus

Generating Links

FRS Failover Regulator Switch 5A-Plus

Price:

Now save save $0.00 $0.00

$21.99
QTY:
Shipped From:
  • USA
  • Global
Already Purchased
Status:
In Stock
SKU:
REG-SW
want FREE shipping? Click here to find out more!

The HobbyKing Regulator switch is an easy and convenient way to add dual power redundancy to your electronics system. Simply use a pair of 7.4v Lipoly batteries and the system will provide dual 5.9v power outputs. The dual outputs can be used for 2 receivers or with a single receiver by using only one power output. In the case of a single output/single receiver configuration the output being used is supplied power by both batteries or a single battery in the case of a battery failure.

This system provides a stabilized voltage of 5.9v. Perfect for 6v Rx systems. This design enables you to use the latest lightweight Lithium-Polymer cells without exceeding the maximum voltage of 6.0 Volts.

The Hobbyking Sensor is equipped with LED power-on indicators for both power circuits. If you switch one battery on, the associated green LED glows. When both batteries are active, both LEDs light up.

The total voltage loss in the HobbyKing Sensor is about .35v which is so low that the volume of waste heat is almost negligible. The maximum continuous current is 5A which means it can easily handle up to 8 servos. However the rated continuous current of 5A does not reflect the capacity of the electronics which can handle much more for short periods, depending on ambient air temperature.

Do not allow the heat sink to exceed 60 Celsius


Specs:
Operating Voltage: 4~9v
Power Supply: One or Two 2S 7.4v Lipoly
Max Load: 5A cont.
Voltage Loss: 0.35v
Voltage stabilization: +/- .1v
Weight: 35g

Directions.
You cannot manually switch the current from one battery to the other, this is done automatically within the system.
The control functions consist of three push-buttons, two green LED’s and one red LED.
The buttons are marked SET, I and II.
The ‘SET’ button is to prepare the system. Holding the SET button in for 2 seconds ‘arms’ both internal switches, this will be shown by the red LED. After you have armed the system, press either or both I, II buttons to activate each battery.
Press and hold ‘SET’ to switch the system off again.

Upload video

Only registered users can upload video. Please, log in or register

Topics
Sort by
Most Recent Topics
* Nickname:

* Your Reply:


Please, enter the text shown in the image into the field below
*Verification Code:
Cancel
Submit
Post a new Topic
* Nickname:

* Your Topic:



Please, enter the text shown in the image into the field below
*Verification Code:
Post Topic

Only registered users can write reviews. Please, sign in or sign up

Blinco | Verified Buyer

  • Quality
  • Overall
  • Value

FRS Failover Regulator Switch 5A-Plus

Oct 12, 2021

FRS Failover Regulator Switch 5A-Plus. Works really well to switch and regulate two batteries

Phill Spencer | Verified Buyer

  • Quality
  • Overall
  • Value

FRS Failover Regulator Switch 5A-Plus

Oct 12, 2021

FRS Failover Regulator Switch 5A-Plus. Great battery backer and regulator

bernd | Verified Buyer

  • Quality
  • Overall
  • Value

gut

Oct 07, 2021

alles bestens Funktion einwandfrei sehr gut

Jamie | Verified Buyer

  • Quality
  • Overall
  • Value

FRS Failover Regulator Switch 5A-Plus

Oct 06, 2021

FRS Failover Regulator Switch 5A-Plus. Very Good. Similar to PowerBox switch. Top stuff

Steve | Verified Buyer

  • Quality
  • Overall
  • Value

FRS Failover Regulator Switch 5A-Plus

Oct 06, 2021

FRS Failover Regulator Switch 5A-Plus. Great failover switch. Great if we could get these in the UK too.

none | Verified Buyer

  • Quality
  • Overall
  • Value

Switch

Oct 03, 2021

Excellent product for my large model Luscombe 8

Jim S | Verified Buyer

  • Quality
  • Overall
  • Value

FRS Failover Regulator

Dec 26, 2020

The is a great little regulator and power swtich in one. Take (2) 7.4 Lipo input and get two 5.9v output. I would have given it a 5 star all around but in needs better documentation. It is easy to figure out but better information would be nice

CARLOS | Verified Buyer

  • Quality
  • Overall
  • Value

Stock

Oct 31, 2020

EU WAREHOUSE PLEASE !!!

Steve | Verified Buyer

  • Quality
  • Overall
  • Value

I have used these switches for many years.

Oct 01, 2020

Wish they were available from UK and or EU warehouse.

Steve speed | Verified Buyer

  • Quality
  • Overall
  • Value

Works perfect

Jul 17, 2020

this is an easy way to get two batteries on the receiver

  1. 1
  2. 2
  3. 3
  4. 4
  5. 5
  6. ...
  7. 7
Upload your file

Only registered users can upload files.
Please log in or register to start helping your fellow hobbyists today!