The FrSky S.BUS to PWM Decoder allows you to use any standard analog or digital servos with your S.BUS compatible receiver. This eliminates the need for using pricey S.BUS specific servos allowing you to use your models existing servos.
Featuring 4 programmable channel outputs, you can independently assign each servo to a channel of your choice while only having to connect one input lead from your receiver. This makes your wiring much more tidy and allows for easy setting up of your servos without the need for running multiple extension leads.
This is a great device to use in conjunction with our Orange 7CH and 9CH S.BUS compatible receivers!
FrSky S.BUS to PWM Decoder
Channel Outputs: 4 programmable
Channel Ouput Lead Lengths: 200mm
Overall Length: 350mm
*Note: FrSky Servo Channel Changer required (sold separately, see related items below) to change assignment of channel outputs.
Building a two engine plane with ailerons, fowler flaps and maybe slats. A tee extension from the receiver, one of these in each wing, minimal wire clutter. They work like a charm and are easy and quick to program with the SBUS DecoderExpand the X8R receiver with more 4 channels. Its indispensable the SBUS programmer to change the channels, other wise you stay with channels 1 to 4 duplicated.Brilliant device - it takes just a couple of minutes to allocate channel numbers to the four analogue outputs (using an FrSky S.BUS Servo Channel Changer - PRODUCT ID: 236000008), plugged it into the S.Bus port of an FrSky X8R receiver - bound the RX to my Taranis (in D16 mode - allocated enough channels e.g "CH1-12") & straight away got another four analogue servo channels (twelve in total) at my disposal..... both superb & simple - virtually "plug & play"! ... AND... if you still want more - you can add a second of these to the receiver's S.Bus port using a Y lead, & get another 4 analogue servo channels ... Radio control was never meant to be this simple ;-)Gutes Teil Praxis Test fehlt noch.??? ?? ???? ?? ??? ?? ? ?? ??? 3?? 1 ?????. SBUS ???? ?????? ?? ?????.Received this decoder yesterday and am very pleased with it. Programmed quickly with the TFR8SB receiver, and seems to work well on the Futaba R7008SB receiver as well. Can't beat the price!!!buono eccellente come i prodotto frskyFantastic item, I use it all the time in all places and electronics. Nice n shiny finish, good coveringgI connected the decoder and i configured channels ch9-ch12 to 1-4 outputs to the receiver and FrSky X8R .
After I tested in receiver 7008SB and the decoder works perfectlyI connected the decoder, the configured channels on it ch9-ch12 to 1-4 outputs to the receiver and FrSky X8R setting on Taranis D16 ch1-ch12 - got 12 channels standard servo.
The second decoder through the Y-cable will give a total of 16 channels!
The fact that I wanted. Setup is simple and straightforward.