New Items Forum
Register

Total Price

$0.00

Cart 0 Cart 0 Loading...

Futaba Switch Harness with Built in Charging Socket and Battery Indicator Light

Futaba Switch Harness with Built in Charging Socket and Battery Indicator Light

Shipped From:
  • USA
  • Global
QTY:

Now save save $0.00 $0.00

$2.92
Status:
In Stock
Weight:
26 g
SKU:
372000023-0
WANT FREE SHIPPING? Click here to find out more!

A very neat switch harness that has a charging socket built into the body of the switch, it also has a sliding cover to stop the ingress of muck and debris.With this switch it gives you the ability to charge the receiver battery in situ without disconnecting any leads or even disassembling the model if you don't want to, the switch is also fitted with a battery indicator light. Suits Futaba style equipment.

Specs:
Length: 45mm
Width: 18mm
Depth: 22mm
Length of Leads: 240mm
Weight: 21g

  • SKU 372000023-0
  • Brand Futaba
  • Capacity (mAh) -
  • Shipping Weight(g) 26.00
  • Length 60.00
  • Width 20.00
  • Height 50.00
Upload video

Only registered users can upload video. Please, log in or register

Only registered users can write reviews. Please, sign in or sign up

Montato sull'aeromodello, molto facile da installare, e pratico per la ricarica della batteria senza togliere le ali++++++lo consiglio

playlist_add_check Overall:
trending_up Value:
verified_user Quality:

Montato sull'aeromodello, molto facile da installare, e pratico per la ricarica della batteria senza togliere le ali++++++lo consiglio

Used these switches on small combat robot's on a 6v system, they have stood up to moderate abuse and are still going strong.

playlist_add_check Overall:
trending_up Value:
verified_user Quality:

Used these switches on small combat robot's on a 6v system, they have stood up to moderate abuse and are still going strong.

A very nice switch at low price. Built in charge port and power on LED indicator light. Only one minus point in my view that is you must cut a big area in your model to fix this switch, but once it is fixed then it looks awesome. But I my advice check the soldering always because some of them have very poor soldering quality.

playlist_add_check Overall:
trending_up Value:
verified_user Quality:

A very nice switch at low price. Built in charge port and power on LED indicator light. Only one minus point in my view that is you must cut a big area in your model to fix this switch, but once it is fixed then it looks awesome. But I my advice check the soldering always because some of them have very poor soldering quality.

Great switch have led indicator

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

Great switch have led indicator

nice switch, works and better than most,

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

nice switch, works and better than most,

I bought two of these on a recent order. To be fair, it looks very nice and a little heavier than I expected for the price. Lucky for me I used one for testing servo setup in a .40 size profile 3D plane on the bench before installing in my very expensive gas plane for which it was intended. It seemed to work fine at first though I smelled that distinctive 'magic smoke' smell within seconds of plugging in a brand new Turnigy Rx pack. The Rx pack, 6 servos, and switch harness were all brand new and I suspected the servos or Rx pack because the smell came so quick. After testing and setup the smell got stronger and stronger so I unhooked everything and left the battery and switch under a fume hood still connected to each other. By luck I came back in just a few minutes to see smoke coming from the charge port, ripped off the battery, and found the source of the smell. The charge port on this switch was grounded out and I'm lucky it didn't burn my battery. I used one of the two I bought just once for a few minutes and it started to self destruct as soon as I plugged in the first battery. I might try the other one just to see what happens in a safe area, but I give it one star for quality because it nearly started a fire in my home, and definitely would have had I not been vigilant about finding the funny smell.

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

I bought two of these on a recent order. To be fair, it looks very nice and a little heavier than I expected for the price. Lucky for me I used one for testing servo setup in a .40 size profile 3D plane on the bench before installing in my very expensive gas plane for which it was intended. It seemed to work fine at first though I smelled that distinctive 'magic smoke' smell within seconds of plugging in a brand new Turnigy Rx pack. The Rx pack, 6 servos, and switch harness were all brand new and I suspected the servos or Rx pack because the smell came so quick. After testing and setup the smell got stronger and stronger so I unhooked everything and left the battery and switch under a fume hood still connected to each other. By luck I came back in just a few minutes to see smoke coming from the charge port, ripped off the battery, and found the source of the smell. The charge port on this switch was grounded out and I'm lucky it didn't burn my battery. I used one of the two I bought just once for a few minutes and it started to self destruct as soon as I plugged in the first battery. I might try the other one just to see what happens in a safe area, but I give it one star for quality because it nearly started a fire in my home, and definitely would have had I not been vigilant about finding the funny smell.

Well made, quality switch. Charging port works. Be aware that this switch is HUGE! it is larger than a futaba 4 channel receiver.

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

Well made, quality switch. Charging port works. Be aware that this switch is HUGE! it is larger than a futaba 4 channel receiver.

I use this switch on all my gas/glow planes. I've used the other well known brands too but this one has much better value. Overall I give it full marks. Quality is excellent. Price is excellent. Very easy to install.

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

I use this switch on all my gas/glow planes. I've used the other well known brands too but this one has much better value. Overall I give it full marks. Quality is excellent. Price is excellent. Very easy to install.

Good product. Does away with the need to have a third charge lead.

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

Good product. Does away with the need to have a third charge lead.

Upload your file

Only registered users can upload files.
Please log in or register to start helping your fellow hobbyists today!