Gear 54T - A2032 and A2033
Top quality spur! Very hard plastic. I use this to change on my Turnigy SCT 2WD 1/10 Brushless Short Course Truck! It's a direct fit along with the correct pinion (32p) - PRODUCT ID: 249000206! It's a blast and still holding 2s and 3S power! Thumbs up!Perfect alternative gear for SCT 2 WD and Desrt Buggy, storng and no problems, slipper clutch fully closed ant no stripped toothslo compre como repuesto, espero sea la solucin para poder usarlo mi desert buggy en 3Suse in 1/10 quanum monster truckGot this for my Turnigy DB, works great! paired it with product ID 249000206 and I didnt even need to adjust the pinion/spur mesh...
Next step is to try the 15T pinion plus 3S ;)Super upgrade for the Turnigy Desert Buggy and Short Course TruckAgora sim uma coroa que no se desgasta com facilidade, a original do Desert Buggy e SCT 2WD se desgastavam de maneira rpida tambm pelo fato da capa de proteo no vedar completamente e ao entrar pedrinhas detonavam as coroas. Seria bom usar silicone nas bordas da capa para prevenir entrada de pedrinhas mas mesmo entrando essa coroa no danificada.
Tambm tem o acoplamento perfeito, sem nenhuma folga, chega at entrar um pouco justa e no precisa de nenhuma adaptao para ser instalada, plug and play! Claro, voc vai precisar tambm de um pinho compatvel que encontrado aqui mesmo no site nas verses 11T, 13T e 15T.
Now yes a crown that does not wear out easily, the original Desert Buggy and SCT 2WD is wearing too quickly because of the protective cover does not seal completely and entering pebbles detonated crowns. It would be good to use silicone around the edges of the cover to prevent entry of pebbles but even taking that crown is not damaged.
It also has the perfect coupling, with no slack, enough to get a fair bit and needs no adaptation for installation is plug and play! Of course, you'll also need a compatible pinion which is found right here on site in versions 11T, 13T and 15T.
make sure you have a few spares just incase of that unexpected rock that always manages to find a way into the gear housing!32 pitch spur gear. The stock one on the Turnigy DB can be replaced with this. Almost impossible to strip if meshed correctly. My slipper clutch is fully tightened (not slipping at all) and the gear is still good as new. My buggy NEVER runs on road, so its taking quite a beating. :)