New Items Forum
Register

Total Price

$0.00

Cart 0 Cart 0 Loading...

General Use 2 Axis Servo Gimbal FC-T8

General Use 2 Axis Servo Gimbal FC-T8

Shipped From:
  • USA
  • Global

Now save save $0.00 $0.00

$17.34
Alert me
Status:
Out of stock!
SKU:
450000069-0
WANT FREE SHIPPING? Click here to find out more!

The FC-T8 is a small light weight general purpose servo type camera gimbal for FPV or camera use. The servo stabilization can be controlled by a head tracker or flight controller directly so no fancy gimbal controller is required. The FC-T12 is sized for smaller cameras such as point and shoot’s or GoPro’s.

Note: the T8 has slightly longer lower arms over the T12

Specs:
Lower camera plate size: 124x40mm
weight: 72g

Includes:
FC-T8 Gimbal kit

 

*Note: The kit needs 2 servos one mid and one mini sized, and a way to control them such as a head tracker, flight controller or just two servo outputs for knob control.

  • SKU 450000069-0
  • Brand -
  • Capacity (mAh) -
  • Shipping Weight 88.0000
  • Length 130.00
  • Width 20.00
  • Height 75.00
Upload video

Only registered users can upload video. Please, log in or register

Only registered users can write reviews. Please, sign in or sign up

The screw holes mostly do not line up

playlist_add_check Overall:
trending_up Value:
verified_user Quality:

The screw holes mostly do not line up

Great product preformed very well great quality

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

Great product preformed very well great quality

Works great with the HKpilot Mega 2.7.

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

Works great with the HKpilot Mega 2.7.

Easy to put together and cheap,not overly strong though it has been held together well.
I would recommend it.

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

Easy to put together and cheap,not overly strong though it has been held together well.
I would recommend it.

Great little gimbal. I do wish they mentioned that it is for an 8mm hook n rod setup. I need one for 10mm HnR. still...good gimbal overall

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

Great little gimbal. I do wish they mentioned that it is for an 8mm hook n rod setup. I need one for 10mm HnR. still...good gimbal overall

I have on of these on my DJI F550 Octo copter. It uses a HK-15178B Digital MG Servo 13.5g / 1.5kg / 0.08s for the tilt. It needs a Standard size sevo the the pan (40 x20mm) I have this working on my Naza MC

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

I have on of these on my DJI F550 Octo copter. It uses a HK-15178B Digital MG Servo 13.5g / 1.5kg / 0.08s for the tilt. It needs a Standard size sevo the the pan (40 x20mm) I have this working on my Naza MC

I bought to install it in my Quad, which has a M200 crab landing gear...the holes did not match, but I combined it with the ActionCam inline gimbal, and it worked very wel.. It's not very sturdy, but works well if your camera is small.

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

I bought to install it in my Quad, which has a M200 crab landing gear...the holes did not match, but I combined it with the ActionCam inline gimbal, and it worked very wel.. It's not very sturdy, but works well if your camera is small.

Gimbal use with Mobius camera on a quadricopter

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

Gimbal use with Mobius camera on a quadricopter

nice gimbal and you can use it without fancy gimbal controller

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

nice gimbal and you can use it without fancy gimbal controller

I bought this with intentions of not using it as a gimbal but as a static camera mount only with a tilt servo.

1) The joints/bushing are extremely flimsy and weak
2) Uses very thin fiber board
3) Will amplify any vibration and bounce like crazy

I ended up not even using it knowing full well before I got this that you spend $15 on a gimbal, you get a $15 gimbal. I have saved the fiber board for future rigs.

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

I bought this with intentions of not using it as a gimbal but as a static camera mount only with a tilt servo.

1) The joints/bushing are extremely flimsy and weak
2) Uses very thin fiber board
3) Will amplify any vibration and bounce like crazy

I ended up not even using it knowing full well before I got this that you spend $15 on a gimbal, you get a $15 gimbal. I have saved the fiber board for future rigs.

Upload your file

Only registered users can upload files.
Please log in or register to start helping your fellow hobbyists today!