Become a Supplier Blog New Items
Register

Total Price

$0.00

Cart 0 Cart 0 Loading...

Turnigy Graphene 4000mAh 6S 45C Lipo Pack w/XT90

Generating Links

Turnigy Graphene 4000mAh 6S 45C Lipo Pack w/XT90

Price:

Now save save $10.80 $10.80

Special Price $43.19 $43.19

You save save $10.80 $10.80

Was  $53.99

Shipped From:
  • USA
  • Global
Already Purchased
ETA: No ETA At This Time [ ? ]
Status:
Out of stock!
SKU:
9067000146-0
want FREE shipping? Click here to find out more!

TURNIGY, the name synonymous with performance, reliability, and innovation is excited to release a powerful new battery chemistry in the Turnigy Graphene!  

What does this really mean for you? Well not only do Graphene batteries go harder for longer but they're unlike anything you have seen or used before.  

Turnigy Graphene packs utilize carbon in the battery structure to form a single layer of graphene just 0.335nm thick, making that type of battery substrate the thinnest known to mankind. The graphene particles form a highly dense compound allowing electrons to flow with less resistance compared to traditional Lipoly battery technologies. 

The result is a battery capable of maintaining greater power output whilst remaining much cooler under load.  Since heat and resistance are the natural enemies of batteries Graphene chemistry has significantly reduced these problems and the result is an incredible boost in cycle life. 

Turnigy Graphene batteries are the new standard for serious hobbyists who require POWER ON DEMAND.

Specs:
Capacity: 4000mAh
Voltage: 6S1P / 6 Cell / 22.2V
Discharge: 45C Constant / 90C Burst
Weight: 698g (including wire, plug & case)
Dimensions: 146x51x49mm
Balance Plug: JST-XH
Discharge Plug: XT-90

Note: Graphene LiPo Batteries only require a standard Lipo battery charger.

Advantages over traditional Lipo batteries.
• Power density: 0.15-0.17kw/kg (5Ah-16Ah)
• Power density: 0.13-0.15kw/kg (1Ah-4.9Ah).
• Stable High pack voltage through duration of use. 
• High discharge rate, giving more power under load.
• Internal impedance can reach as low as 1.2mO compared to that of 3mO of a standard Lipoly.
• Greater thermal control, packs stay much cooler under extreme conditions
• Higher capacity during heavy discharge.
• Maintains higher pack capacity even after hundreds of cycles
• Fast charge capable, up to 15C on some batteries.
• Longer Cycle Life of 600+

  • Capacity (mAh) 4000.00
  • Discharge(c) 45.00
  • Max Charge Rate(C) 10.00
  • Length-A(mm) 146.00
  • Height-B(mm) 51.00
  • Width-C(mm) 49.00
attributeset-12
Close

Dimension Diagram Guide

  • attributeset-12

Close

Upload video

Only registered users can upload video. Please, log in or register

Topics
Sort by
Most Recent Topics
* Nickname:

* Your Reply:


Please, enter the text shown in the image into the field below
*Verification Code:
Cancel
Submit
Post a new Topic
* Nickname:

* Your Topic:



Please, enter the text shown in the image into the field below
*Verification Code:
Post Topic

Only registered users can write reviews. Please, sign in or sign up

Jimmy | Verified Buyer

  • Overall
  • Quality
  • Value

Arrived in properly order, and so far so good

Jul 07, 2020

I have had good luck with these Graphene packs so far, great power and low temps keep them reliable and long lasting. Yes the weight is a trade off, but worth it for my needs.

Swampy | Verified Buyer

  • Overall
  • Quality
  • Value

suits me and my requirements

Jun 18, 2020

this is the 4 th battery of this type for my avanti s 6 minute flight with enough left in the battery for a few go rounds if needed. Land with 19% in the battery

Federico | Verified Buyer

  • Overall
  • Quality
  • Value

GOOD LIPO GOOD, QUALITY, VERY STABLE, LOWER INTERNAL RESISTANCE

Nov 07, 2019

Yes it is good lipo...It has a lower internal resistance and deliver a very stable power.
I suggest them the 45 c for prop planes and Helicopters but not for extreme 3D.Graphene lipos cost more and are heavier than non graphene lipos but they are built with top materials and they last at list 50% more ( around 600 flights ) if well manage and always stored after flight at 3,8 v not less than 3,6 v par cell or you damage them.If you use instead an EDF plane or an hell for 3D i suggest to buy the PANTHER LIPOS excellent power all over the flight

Patrick | Verified Buyer

  • Overall
  • Quality
  • Value

M.

Jul 15, 2019

Voir la longévité, c'est trop tôt pour apprécier.

michel | Verified Buyer

  • Overall
  • Quality
  • Value

graphene 6s 4000 mah

Jul 04, 2019

je l'utilise avec un jet edf de 70 mm, aprés 12 charges il est gonflé.
je ne vide jamais en dessous de 20%

pedurand | Verified Buyer

  • Overall
  • Quality
  • Value

Gonflée après 2 charges

Jul 01, 2019

Légèrement déçu de cette batterie, elles ont gonflées après 2 charges... (2 pack)
Utilisée dans un Goblin 500 (65% de gaz - 4 min en vol normal - reste 45% de charge)
Néanmoins elles fonctionnent bien pour l'instant !!!
A voir avec le temps

celke | Verified Buyer

  • Overall
  • Quality
  • Value

good lipo

Jun 23, 2019

nice pack, only minor point is the weight.

Rob | Verified Buyer

  • Overall
  • Quality
  • Value

Customer Rated

May 05, 2016

Cant recommend: it came unbalanced and nearly empty at 3.7 volts.
After charging and discharging with a hiqh quality lipo-charger, 1 of the 6 cells did not realy match with the other five: around 0.5V difference.
Support told me that is OK for them!
So, its everyones decision to fly a 550 heli with this pack?!
I wont!
Greetings, Rob.

Taylor | Verified Buyer

  • Overall
  • Quality
  • Value

Customer Rated

Apr 05, 2016

This pack so far is absolutely amazing!! Using it in my 80mm FW jets that I have outfitted with inrunners spinning the 12b rotor I'm getting peak numbers of a little over 2400 watts and voltage sag of only 3.91v a cell. I like to land at 3.8v but i have been pushing the hell out of these so I've come down with them at 3.7v/3.65v but they still come back up to around 3.8v once settled. The best part they hardly get warm and this is after 4 solid min in a Mirage, F86 or Super Scorpion with ambient temps at 85F . I've already put 20 cycles on these packs with a moderate break in when I first got them so only time will tell but I'm super optimistic with all the hard data you can find on RCG. These are the real deal guys.
-tayze

Upload your file

Only registered users can upload files.
Please log in or register to start helping your fellow hobbyists today!

Accessories