Become a Supplier Blog New Items
Register

Total Price

$0.00

Cart 0 Cart 0 Loading...

Turnigy Graphene 600mAh 1S 65C LiPo Pack w/JST

Generating Links

Turnigy Graphene 600mAh 1S 65C LiPo Pack w/JST

Price:

Now save save $5.80 $5.80

Special Price $0.86 $0.86

You save save $5.80 $5.80

Was  $6.66

Already Purchased Discontinued Product

Please continue searching for a similar product.
SKU:
9067000115-0
want FREE shipping? Click here to find out more!

TURNIGY, the name synonymous with performance, reliability and innovation is excited to release a powerful new battery chemistry in the Turnigy Graphene!  

What does this really mean for you? Well not only do Graphene batteries go harder for longer but they're unlike anything you have seen or used before.  

Turnigy Graphene packs utilize carbon in the battery structure to form a single layer of graphene just 0.335nm thick, making that type of battery substrate the thinnest known to mankind. The graphene particles form a highly dense compound allowing electrons to flow with less resistance compared to traditional Lipoly battery technologies. 

The result is a battery capable of maintaining greater power output whilst remaining much cooler under load.  Since heat and resistance are the natural enemy of batteries Graphene chemistry has significantly reduced these problems and the result is an incredible boost in cycle life. 

Turnigy Graphene batteries are the new standard for serious hobbyists who require POWER ON DEMAND.

Specs:
Capacity: 600mAh
Voltage: 1S1P / 1 Cell / 3.7V
Discharge: 65C Constant / 130C Burst
Weight: 15g (including wire, plug & case)
Dimensions: 60x20x9mm
Balance Plug: -
Discharge Plug: JST-SYP-2P

Note: Graphene LiPo Batteries only require a standard Lipo battery charger.

Advantages over traditional Lipo batteries.
• Power density: 0.15-0.17kw/kg (5Ah-16Ah)
• Power density: 0.13-0.15kw/kg (1Ah-4.9Ah).
• Stable High pack voltage through duration of use. 
• High discharge rate, giving more power under load.
• Internal impedance can reach as low as 1.2mO compared to that of 3mO of a standard Lipoly.
• Greater thermal control, packs stay much cooler under extreme conditions
• Higher capacity during heavy discharge.
• Maintains higher pack capacity even after hundreds of cycles
• Fast charge capable, up to 15C on some batteries.
• Longer Cycle Life 600+

  • Capacity (mAh) 600.00
  • Discharge(c) 65.00
  • Max Charge Rate(C) 10.00
  • Length-A(mm) 60.00
  • Height-B(mm) 20.00
  • Width-C(mm) 9.00
attributeset-12
Close

Dimension Diagram Guide

  • attributeset-12

Close

Upload video

Only registered users can upload video. Please, log in or register

Topics
Sort by
Most Recent Topics
* Nickname:

* Your Reply:


Please, enter the text shown in the image into the field below
*Verification Code:
Cancel
Submit
Post a new Topic
* Nickname:

* Your Topic:



Please, enter the text shown in the image into the field below
*Verification Code:
Post Topic

Only registered users can write reviews. Please, sign in or sign up

Roy | Verified Buyer

  • Overall
  • Quality
  • Value

Defective connectors

Sep 04, 2018

Purchased 6 batteries. So far I've had to replace 3 connectors.

Sergey | Verified Buyer

  • Overall
  • Quality
  • Value

Best battery I've tested, but the specs are totally false.

Jan 27, 2017

Out of several 500-600mAh I've tested from various manufacturers, this one has the best performance. Testing on the bench showed the lowest voltage drop under load and the lowest amount of heating after a constant current high-discharge test.

HOWEVER, it's worth saying that this battery is realistically a 20C battery. I've tested this battery extensively with an electronic load. Any draw above 13 or so Amps results in far too much voltage drop. A freshly charged battery will drop to well under 3V under that kind of load. 130C burst? That's 78 Amps. Not a snowball's chance in hell. 65C would be 40 Amps. Again - not a chance.

Still the best battery of this size I've found, but these ratings are getting out of hand.

Sebastian | Verified Buyer

  • Overall
  • Quality
  • Value

Wrong Measurements

Jan 24, 2017

I measured my two cells today and I can say they are not 60x20x9mm :D mine are 59,5x17,5x7,5. So much better then described by HK. Weight is correct around 15g.

Kerem | Verified Buyer

  • Overall
  • Quality
  • Value

Extraordinary power

Dec 20, 2016

This battery is amazing. It is *very* powerful, made an insanely significant difference in raw performance on my JJRC H31, and also fits in its battery compartment (although it is a bit too long for the trap door to close). Definitely worth the added punch, never mind the longevity. I will definitely order a few more of these. Try these. Really. Do.

Capt. Peter | Verified Buyer

  • Overall
  • Quality
  • Value

Certified Buyer Rated

Apr 21, 2016

Amazing little batteries, they stay cool and let out a good constant flow of power. When charging mine only pack around 450mah though but compared to similar spec'd lipos these last more than twice as long and pack a good punch of power when needed ALL THE TIME! i would be great if HOBBYKING made a 300mah version for the walkera ladybird!! :)

Abraham | Verified Buyer

  • Overall
  • Quality
  • Value

Customer Rated

Mar 27, 2016

Maybe Preach'in to the choir here...
The "Bolt" line of batteries is superior to the "Graphene" line in every way except in a function that I cannot test... longevity. For those running 1s, get your hands on a 3s/2s bolt, disassemble and see what you get.

JG101 | Verified Buyer

  • Overall
  • Quality
  • Value

Customer Rated

Mar 03, 2016

This battery is good. It gives great punch to my brushed micro's. Out performs all my other 1s batteries.

ADAM | Verified Buyer

  • Overall
  • Quality
  • Value

Customer Rated

Feb 25, 2016

Excellent battery! Lives up to the hype. I had to make sure and watch my voltage while flying because I didn't notice ANY voltage sag, aka sag in power the whole flight. While all my other batterys get warm or even hot from flying hard, these stay nice and cool. I have a feeling these batterys are going to be a new standard for micro quadcopter flyers like myself!

Upload your file

Only registered users can upload files.
Please log in or register to start helping your fellow hobbyists today!