Become a Dealer Blog
Register

Total Price

$0.00

Cart 0 Cart 0 Loading...

GWS Brushless Outrunner 001A 2160kv 27g (2205/15T)

Generating Links

GWS Brushless Outrunner 001A 2160kv 27g (2205/15T)

 
Price:

Now save save $0.00 $0.00

$14.95
Shipped From:
  • Global
Already Purchased Discontinued Product

Please continue searching for a similar product.
1 year warranty
SKU:
GWBLM001A
want FREE shipping? Click here to find out more!

GWS Brushless Outrunner Motor
Model: GWBLM001A
Voltage: 7.4v
No Load Current: .7A
Kv: 2160
Shaft Diameter: 3mm
Outer Diameter: 28mm
Weight: 27.2g/.96oz

  • Kv(rpm/v) 0.00
  • Max Current (Motor) (A) 0.00
  • Resistance (mh) 0.00
  • Max Voltage (V) 0.00
  • Shaft A(mm) 3.00
  • Length B (mm) 22.00
  • Can Diameter C(mm) 28.00
  • Can Length D(mm) 9.00
  • Total Length E(mm) 52.00
attributeset-10
Close

Dimension Diagram Guide

  • attributeset-10

Close

Upload video

Only registered users can upload video. Please, log in or register

Topics
Sort by
Most Recent Topics
* Nickname:

* Your Reply:


Please, enter the text shown in the image into the field below
*Verification Code:
Cancel
Submit
Post a new Topic
* Nickname:

* Your Topic:



Please, enter the text shown in the image into the field below
*Verification Code:
Post Topic

Only registered users can write reviews. Please, sign in or sign up

OSEIAS SLOMPO | Verified Buyer

  • Overall
  • Quality
  • Value

It's a great motor

Nov 14, 2007

This great motor was used with GWS 6x3 prop, HXT 2S1P 1300mAh battery and I put this set on Ugly Stick (weight 260g). It was very good 'cause I can fly for several minutes (around 40 average).

efinkg | Verified Buyer

  • Overall
  • Quality
  • Value

high power motor

Nov 14, 2007

This motor works fantastic. It is very smooth running and quiet, but extremely powerful. Using a 3s1320mAh TP pack and a 9X6 APC propeller it develops 110 watts in flight at 11 amps. One warning is that it should be used for less than five minutes at WOT for motor longevity. Excellent power at a low cost.

Adalton Alves | Verified Buyer

  • Overall
  • Quality
  • Value

Flight time up to 40 minutes

Nov 14, 2007

Do you want up to 40 minutes flight time with Piper Pico J3 from GWS?

This motor 2205 is a must, with prop 8X4.3 and bat 1600mA it will reach this flight time performance.

Kenton Jones | Verified Buyer

  • Overall
  • Quality
  • Value

GWS motor

Nov 14, 2007

although the motor appeared nice I had prob with it from the first time I tryed to run it. I'm sure I just got unlucky with mine but it kept cutting on and off and never ran right

Martin Hedegaard | Verified Buyer

  • Overall
  • Quality
  • Value

GWS Brushless Outrunner 27g (2

Nov 14, 2007

i use this on my indoor blade (220g) i use a 15C 600 mah lipopach, a 12 amp ESC and a gws 8x4 thin prop. hovers great plenty of power to pull out of the hover. i also tested it with same setup but with a 8x4 gws prop, black, a little thicker and that made it go down in rpm in hovers, most likely because of too many amps thru the ESC. all in all a very good indoor motor.

Claudio Rossi | Verified Buyer

  • Overall
  • Quality
  • Value

Outrunner 001A 2160kv

Nov 14, 2007

Very nice motor .



Low Amp drain and a lot of power for my minislinger.

With a little 2 cell lipo battery 1200 mAh I fly for more the 30 minutes.

It drain 5 A. with a 6x3 prop.



Good.

Guido Boddenberg | Verified Buyer

  • Overall
  • Quality
  • Value

Outrunner 001A 2160kv

Nov 14, 2007

Super Motor, tolle Verabeitung und ein unschlagbarer Preis!

Upload your file

Only registered users can upload files.
Please log in or register to start helping your fellow hobbyists today!