New Items Forum
Register

Total Price

$0.00

Cart 0 Cart 0 Loading...

GWS EDF System 50 w/ motor (2.61oz Thrust)

GWS EDF System 50 w/ motor (2.61oz Thrust)

Discontinued Product

Please continue searching for a similar product.
SKU:
GW-EDF50A
WANT FREE SHIPPING? Click here to find out more!

GWS 50 size EDF System
For details and thrust charts, please click below;
http://www.gwsus.com/english/product/powersystem/edf50.htm
This kit gices 2.61oz of thrust with the already installed brushed motor. Changing to a Feigao brushless system would create a great deal more power.

Suits motors with a diameter no larger than 12mm

This kit comes with the CN12-RLC motor installed. It can be replaced with a brushless motor for better performance.

  • SKU GW-EDF50A
  • Brand -
  • Capacity (mAh) -
  • Shipping Weight 97.0000
  • Length 0.00
  • Width 0.00
  • Height 0.00
Upload video

Only registered users can upload video. Please, log in or register

Only registered users can write reviews. Please, sign in or sign up

I needed a ductfan for a school-experiment (I'm a physicsteacher).
Put it on a cart on a air-cushion-rails. Just needed 1 AA 1,2 V battery to give the cart a decent acceleration.
Couldn't use a brushless because of lack of esc at my school.

Great (and cheap) product.

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

I needed a ductfan for a school-experiment (I'm a physicsteacher).
Put it on a cart on a air-cushion-rails. Just needed 1 AA 1,2 V battery to give the cart a decent acceleration.
Couldn't use a brushless because of lack of esc at my school.

Great (and cheap) product.

Bought even more GWS 50mm EDF,s. With for example brushless motors

high Kv I save over 85g on A-10 and it flies exellent. Its not built for supersonic but makes big loops. Are building an A-7 corsair. Same same, 50 mm GWS setup. Most buck for the dollar. search on the net for impellers. robotbirds UK is one

Morgan

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

Bought even more GWS 50mm EDF,s. With for example brushless motors

high Kv I save over 85g on A-10 and it flies exellent. Its not built for supersonic but makes big loops. Are building an A-7 corsair. Same same, 50 mm GWS setup. Most buck for the dollar. search on the net for impellers. robotbirds UK is one

Morgan

Well working 50 mm EDF unit. Save more than 85 g on 2x50 with A-10.

Using Feigao 12 mm motors. Hints: Drill 2 small holes opposite side of case. Just between front of engine and back of fan. 2 small screwdrivers and bend lightly. 2:Sandpaper new motoraxel slightly. Tiny amount of Epoxi in the fanhole. Voila.

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

Well working 50 mm EDF unit. Save more than 85 g on 2x50 with A-10.

Using Feigao 12 mm motors. Hints: Drill 2 small holes opposite side of case. Just between front of engine and back of fan. 2 small screwdrivers and bend lightly. 2:Sandpaper new motoraxel slightly. Tiny amount of Epoxi in the fanhole. Voila.

I use it to power a cart on a air-tube. Not very much thrust, but I don't need that. I just need a impellor that will go on just a couple of AA's

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

I use it to power a cart on a air-tube. Not very much thrust, but I don't need that. I just need a impellor that will go on just a couple of AA's

Can replacement impellors be bought for this unit?

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

Can replacement impellors be bought for this unit?

It is OK, but they say it could be made more efectiv with a brushless motor. Hovewer that is easier said than done. The engine is fasten to the duct with a glue ? and therefor it is impossible to remove without breaking the impeller and duct. I have bought BA BL1230 to no use.

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

It is OK, but they say it could be made more efectiv with a brushless motor. Hovewer that is easier said than done. The engine is fasten to the duct with a glue ? and therefor it is impossible to remove without breaking the impeller and duct. I have bought BA BL1230 to no use.

80g thrust with Turnigy B12-30 motor, 3s lipo 2,3A

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

80g thrust with Turnigy B12-30 motor, 3s lipo 2,3A

Read up some articles on using as DD for the FP helis using the N motors. Item works great and only warm after prolonged hover. Only drawback is the high pitch sound of the EDF unit but I do not have to worry about replacing tail blades anymore....

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

Read up some articles on using as DD for the FP helis using the N motors. Item works great and only warm after prolonged hover. Only drawback is the high pitch sound of the EDF unit but I do not have to worry about replacing tail blades anymore....

Upload your file

Only registered users can upload files.
Please log in or register to start helping your fellow hobbyists today!