Suitable for the H-King 10A, 20A, 35A, 50A and 60A Brushless Speed Controller (helicopter and fixed wing)
Cut Off Voltage: Auto Lipo, None, 6V, 9V, 12V, 18V
Auto-LiPo Cut Off Volts/Cell: 3.0V, 3.1V, 3.2V, 3.3V, 3.4V, 3.5V
Cut Off Type: Soft Cut Off, Hard Cut Off
Motor Timing: Low, Normal, High
Motor Direction: Forward, Reverse
Throttle Type: Auto Calibrate, Fixed, Heli Fixed, Govern Simple, Govern Low, Govern High
Governor Gain: 0~100%
There seems to be a theme going on here, the card did not work just the lipo light lit up, if it is supposed to be compatible with 10amp 20amp 35amp 50amp and 60amp why won't it work with the HK 30amp, this sort of thing really let Hobbyking down a pity as they do give good service, it would be helpful if they listed the ESC's this card dose not work with, but the list would probably be too long.Ten times better than trying to hear the beeps and work out what in going on.I bought this to program the H-KING 10A Fixed Wing Brushless Speed Controller. So easy to use compared trying to program the ESC using transmitter throttle stick. I also like how the operating instructions are printed on the back casing of the card.I give this product a BIG 0 overall rating , it never worked !
quality seems good if it worked .
value a BIG of 0 again for quality .I have 3 HK speed controllers so purchased this programming card in order to program them. When I plug the card in all I get is the Auto LIPO led to turn on. This Programming Card is worthless. DO NOT PURCHASE THIS PROGRAMMING CARDI bought one of these program cards to set up my 60A Hobbyking ESC as the manual process seemed overly complicated. Having checked that the card was apparently capable of programming a range of Hobbyking ESC, my 60A being one of them, I bought this item. Having connected it up as per instructions, all that ever seemed to work was the Auto Lipo light. Having spoken to customer support, I was advised that my ESC and program card were not compatible. There are various combinations of ESC' and program cards produced by Hobbyking so I can see that they may not be 'all' compatible but it's frustrating when having bought an item to find out it doesn't work. Perhaps Hobbyking should say in their product write up what works with what as this would save us all time and money. I would strongly suggest that any one who is considering purchasing this card find out if it's compatible with their ESC before placing an orderLeider Passt die Programierkarte nicht fr Hobby King 60A ESC 4A UBEC.
Somit ist es mir nicht mglich eine gute bewertung zu schreiben.
Hab sie noch an einem H-KING 50A Fixed Wing Brushless Speed Controller getestet, da funktioniert sie.does not work with hk60 amp.didn't work for me tried about 4 times only thing that comes on is the auto lipo led tired to program hobbyking 60amp escThis programing card does not work with my Hobby King 60amp ESC. Only the Lipo auto LED lights. Nothings else. Hobby King won't help. I would advise not to buy this product as it doesn't do what it says on the packet (or on the website)